• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.123-123
• /
• 2003

야채 soup mix의 제조조건이 야채죽의 물리적 및 관능적 특성에 대한 영향을 조사하였다. Soup mix의 제조조건인 주입액의 양 (쌀 무게에 대한 물의 체적 비), 버섯, 당근 그리고 대파의 첨가량(쌀 무게에 대한 잣의 무게 비)에 따른 물리적 특성과 관능적 특성의 변화를 모니터링 하고자 반응 표면분석법 (response surface methodology, RSM)을 사용하였으며, 이때 실험계획은 중심합성계획법을 적용하였다. 요인변수(Xn)를 중심합성계획에 따라 17실험구로 구분하여 조리실험을 실시하였고, 이들 요인변수에 의해 영향을 받는 반응변수(Yn)는 야채죽의 물리적 특성으로 하여 회귀분석에 사용하였다. 회귀분석에 의한 모델식의 예측에는 SAS (statistical analysis system) program을 사용하였으며, 야채죽의 조리조건이 물리적 및 관능적 특성에 미치는 영향은 SAS program을 이용한 3차원 반응표면분석법으로 해석하였다. 야채의 배합비를 달리한 야채죽의 물리적 특성인 색도 L, a 및 b값에 대한 F-value는 자각 1.50, 11.75 및 5.58이고,유의수준이 각각 0.3044, 0.0019와 0.0169로서 a값과 b값의 유의성이 1% 수준에서 인정되어 이들 제조조건이 a값과 b값에 큰 영향을 미치는 것으로 나타났다. 점도와 퍼짐성에 대한 유의수준은 각각 0.6920과 0.7528이고, 반응표면회귀식의 $R^2$은 각각 0.4766과 0.4436으로 유의성이 인정되지 않았다. 고형분에 대한 유의수준은 0.2026이고 회귀식의 $R^2$는 0.7107으로서 버섯, 당근 및 대파 첨가량이 고형분의 변화에 영향을 미치지 않은 것을 알 수 있었다. 관능적 특성인 색상에 대하여 soup mix의 제조조건이 야채죽에 미치는 영향은 F-value는 6.23이고, 유의수준이 0.0124으로서 1%수준에서 유의성이 인정되었으며, 회귀식의 $R^2$은 0.8890이다. 향에 대한 유의확률은 0.4555이고 0.05이상이므로 유의성이 인정되지 않아 설정된 범위내에서 야채죽의 향에 대하여 크게 영향을 미치지 않는 것으로 나타났다. 점성에 대한 반응표면회귀식의 $R^2$은 0.8134로서 그 유의성이 5%수준에서 인정되었다. 맛과 전반적 기호도에 대하여 야채의 배합비에 따른 반응표면회귀식의 $R^2$은 각각 0.7374와 0.8651이며, 유의화률은 0.1578과 0.0228으로 나타나 전반적인 기호도에 대한 영향은 10% 유의수준에서 영향을 주었다. 결론적으로, 물리적 특성인 색도, 점성, 퍼짐성과 고형분의 함량은 관능적 특성인 색과 비교적 높은 정(正)의 상관을 나타내었으며, 관능적 특성인 향과의 상관은 유의성이 인정되지 않았다. 야채죽 제조를 위한 soup mix의 제조조건에 있어서 야채의 배합비는 색과 점성에 영향을 미치는 가장 주요한 조건이라고 생각된다.

• Food Science of Animal Resources
• /
• v.27 no.3
• /
• pp.345-350
• /
• 2007

This study was carried out to establish the optimal preparation conditions of yoghurt made from goat milk with reduced goaty flavor by adding citrus concentrate and flavor. A central composite design was applied to investigate the effects of citrus concentrate ratio (0.5, 1.0, 1.5, 2.0, 2.5%), citrus flavor ratio (0.01, 0.02, 0.03, 0.04, 0.05%) and fructose ratio (3, 4, 5, 6, 7%). The physico-chemical and sensory characteristics of the sixteen yoghurt samples were compared. The addition of citrus concentrate had a significant (p<0.01) effect on the pH, $a^*,\;and\;b^*$ values. Regarding organoleptic properties, the addition of citrus concentrate had a significant (p<0.01) effect on color, and fructose had an effect on overall palatability. The maximum value of organoleptic goaty flavor was 2.35, more than double the minimum value. The optimum conditions predicted for minimizing goaty flavor of the yoghurt were 1.44% citrus concentrate, 0.0357% citrus flavor, and 6.91% fructose.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.9
• /
• pp.1471-1476
• /
• 2005

The optimization of ethanol treatment was carried out by response surface methodology (RSM) which was expressed through change of ${\Delta}$E value for improvement of color of dried large anchovy. The optimum condition was shown as treatment with 7 volumes (v/m) of ethanol at $50^{\circ}C$ for 9 hrs. At this condition, the removal rates of trimethylamine (TMA) and fat considered as fishy odor-causing materials were 81.1 and $77.4\%$, respectively, when analyzed by solid phase microextraction (SPME)/gas chromatography and soxhlet method, respectively The effect of citric acid on the removal rate of TMA was the highest one among organic acid treatments. The removal rate of TMA was affected greatly by the concentration of organic acid rather than the temperature and time of treatment. $73\%$ of TMA was removed by treatment of $1\%$ of citric acid at $20^{\circ}C$ for 20 min. Specially, above $90\%$ of TMA could be removed by the combination of alcohol and citric acid treatment. In vitro absorption rate of calcium was also increased to $12.3\%$ by the combination of alcohol and citric acid treatment compared with $2.9\%$ of control.

• Journal of the Korean Society of Food Culture
• /
• v.14 no.1
• /
• pp.49-55
• /
• 1999

This study was to investigate the physicochemical and sensory characteristics of snack with various amounts Cham chwi and oil. This result was used to determine the optimum condition of adding levels of Cham chwi and oil. Flavor, crispness, greasiness, oil absorption, expansion rate were selected as the physicochemical and sensory characteristics to determine the optimum conditions of the amount of Cham chwi and oil. The predicted values were obtained by the regression method of RSM(response surface methodology). Conditions were standardized with maximum range of expansion rate when expected value of crispness was more than five and expected value of greasiness was less five. The optimum conditions of Cham chwi snack was established as the 8.6% of Cham chwi and 7.6% of oil.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.733-739
• /
• 2014

To develop an effective use for poor-quality individually quick-frozen (IQF) oysters Crassostrea gigas stored for a long period, the extract conditions, quality characteristics, and optimum reaction flavoring (RF) conditions of a complex extract from these IQF oysters were investigated. The moisture, pH, and volatile basic nitrogen contents of IQF oysters stored for 18 months (18M-IQFO) were 77.9%, 6.32, and 17.9 mg/100 g, respectively. Three different kinds of extract were prepared from 18M-IQFO: a hot-water extract (HE), scrap enzymatic hydrolysate (EH), and complex extract (CE). The respective extracts contained 5.5, 8.6, and 6.6% crude protein and 281.7, 366.0, and 343.0 mg/100 g amino nitrogen, and had 811, 359, and 1,170 mL/kg extraction yields. The CE was superior to the traditional HE in terms of the extraction yield, amino-nitrogen content, and organoleptic qualities, except for the odor. To improve flavor via the Maillard reaction, the reaction system used to produce a desirable flavor comprised CE (Brix $30^{\circ}$), 0.4 M glucose, 0.4 M glycine, and 0.4 M cysteine solution (4:2:1:1, v/v). The reaction time and pH were the independent variables, and the sensory scores for baked potato odor, masking shellfish odor, and boiled meat odor were the dependent variables. The surface response methodology (RSM) analysis of the multiple responses optimization gave a reaction time of 120.6 minutes and pH 7.33 at $120^{\circ}C$. The reaction improved the flavor of CE considerably, as compared to that of the unreacted extract.

• Korean Chemical Engineering Research
• /
• v.48 no.6
• /
• pp.704-711
• /
• 2010

Lignocellulose ($2^{nd}$ generation) is difficult to hydrolyze due to the presence of lignin and the technology developed for cellulose fermentation to ethanol is not yet economically viable. However, recent advances in the extremely new field of biotechnology for the ethanol production are making it possible to use of agriculture residuals and nonedible crops biomass, e.q., rice straw and miscanthus sinensis, because of their several superior aspects as agriculture residual and nonedible crops biomass; low lignin, high contents of carbohydrates. In this article, as the basic study of AP(Ammonia Percolation), the properties and the optium conditions of process were established, and then the overall efficiency of AP was investigated. The important independent variables for AP process were selected as ammonia concentration, reaction temperature, and reaction time. The percolation condition for maximizing the content of cellulose, the enzymatic digestibility, and the lignin removal was optimized using RSM(Response Surface Methodology). The determined optimum condition is ammonia concentration; 11.27%, reaction temperature; $157.75^{\circ}C$, and reaction time; 10.01 min. The satisfying results were obtained under this optimized condition, that is, the results are as follows: cellulose content(relative); 39.98%, lignin content(relative); 8.01%, and enzymatic digestibility; 85.89%.

• Food Science and Preservation
• /
• v.18 no.4
• /
• pp.546-551
• /
• 2011

Response surface methodology (RSM) was used for the microwave-assisted extraction (MAE) of the effective components of grape seed, such as its antioxidative and nitrite-scavenging abilities. Microwave power (2,450 MHz, 0-160W), ethanol concentration (0-100%), and MAE time (1-5 min) were used as independent variables (Xi) for the central composite design to yield 16 different MAE conditions. The optimum MAE conditions were predicted for the dependent variables of the extracts, such as the total phenolic content ($Y_1$) antioxidative ability ($Y_2$), and nitrite-scavenging ability ($Y_3$), depending on different microwave powers, ethanol concentrations, and MAE times. The determination coefficients ($R^2$) of the regression equations for the dependent variables ranged from 0.8024 to 0.9498. The maximal values of each dependent variable were predicted at different MAE conditions, as follows: 3.19% total phenolic content at 142.32W, 44.30% ethanol, and 4.36 min, and 1.22 antioxidative ability at 84.44W, 56.60% ethanol, and 3.28 min. More than 99.5% nitrite-scavenging ability was predicted at pH 1.2-3.0, 30.80-106.58W, 49.32-55.18% ethanol, and 3.72-4.58min, respectively. The results indicated that the total phenolic content and anti oxidative ability showed a higher correlation with each other in that they were more influenced by microwave power than by the other variables, while the nitrite-scavenging ability was largely influenced by the ethanol concentration.

• Food Science and Preservation
• /
• v.20 no.4
• /
• pp.502-509
• /
• 2013

This study was conducted in order to monitor the extraction conditions for a gel-state beverage development of the Opuntia ficus-indica stem. Moreover, the organoleptic properties of the beverage prepared by the extract were optimized using the response surface methodology (RSM). The determination coefficient ($R^2$) value for the extraction yield of the stem was 0.95 (p<0.01). The maximum extraction yield was obtained at an extraction temperature of $93.02^{\circ}C$, 123 min of extraction time and 22.57 mL/g of water to sample. The beverage was prepared with the addition of xanthan gum, sugar and persimmon vinegar to the extract with a central composite design. The maximum organoleptic color of the beverage was obtained at 0.38% xanthan gum, 7.91% sugar and 0.76% persimmon vinegar. The maximum organoleptic flavor was obtained at 0.30% xanthan gum, 7.06% sugar and 1.26% persimmon vinegar. The maximum organoleptic taste was obtained at 0.22% xanthan gum, 10.36% sugar and 0.90% persimmon vinegar. The maximum overall palatability (3.92 score) of the gel-state beverage was obtained at 0.35% xanthan gum, 10.83% sugar and 1.21% persimmon vinegar.

• Food Science and Preservation
• /
• v.10 no.2
• /
• pp.219-223
• /
• 2003

Response surface methodology was used for monitoring and optimizing the extraction conditions of campesterol, stigmasterol, ${\beta}$ -sitosterol, and total sterols from the safflower seed. The conditions of phytosterol extraction were optimized by using central composite design with the temperature(35∼75$^{\circ}C$, X$_1$), the time (1∼11hr, X$_2$), and the preheating temperature(60∼100$^{\circ}C$, X$_3$) as three variables. The extraction conditions for maximum campesterol content were 59.01$^{\circ}C$(X$_1$), 2.88hr(X$_2$), and 75.04$^{\circ}C$(X$_3$). But stigmasterol, ${\beta}$ -sitosterol and total sterols were not significantly different under designed extraction condition in this study. Besides, oil was extracted from safflower seed at various conditions and yields were 23.44% at 35$^{\circ}C$ and 20.05% at 80$^{\circ}C$, respectively. Total tocopherol content increased from 0.172% to 0.207% as the extraction temperature increased from 35$^{\circ}C$ to 80$^{\circ}C$. A structured lipids(SL) was synthesized enzymatically by extracted safflower oil and conjugated linoleic acid(CLA). After 24hr reaction, 31.79 mol% CLA was incorporated into the extracted safflower oil.

• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.229-239
• /
• 2018

The purpose of this study was to effectively produce the biosugar from cell wall of lipid extracted microalgae (LEA) by using microwave-assisted pretreatment without enzymatic hydrolysis process. Response surface methodology (RSM) was applied to optimization of microwave-assisted pretreatment conditions for the production of biosugar based on enzyme-free process from LEA. Microwave power (198~702 W), extraction time (39~241 sec), and sulfuric acid (0~1.0 mol) were used as independent variables for central composite design (CCD) in order to predict optimum pretreatment conditions. It was noted that the pretreatment variables that affect the production of glucose (C6) and xylose (C5) significantly have been identified as the microwave power and extraction time. Additionally, the increase in microwave power and time had led to an increase in biosugar production. The superimposed contour plot for maximizing dependent variables showed the maximum C6 (hexose) and C5 (pentose) yields of 92.7 and 74.5% were estimated by the predicted model under pretreatment condition of 700 w, 185.7 sec, and 0.48 mol, and the yields of C6 and C5 were confirmed as 94.2 and 71.8% by experimental validation, respectively. This study showed that microwave-assisted pretreatment under low temperature below $100^{\circ}C$ with short pretreatment time was verified to be an effective enzyme free pretreatment process for the production of biosugar from LEA compared to conventional pretreatment methods.