• Journal of the Korean Society of Safety
• /
• v.11 no.4
• /
• pp.143-150
• /
• 1996

This is an explicit-Implicit, finite element analysis for linear as well as nonlinear hygrothermal stress problems. Additional features, such as moisture diffusion equation, crack element and virtual crack extension(VCE ) method for evaluating J-integral are implemented in this program. The Linear Elastic Fracture Mechanics(LEFM) Theory is employed to estimate the crack driving force under the transient condition for and existing crack. Pores in materials are assumed to be saturated with moisture in the liquid form at the room temperature, which may vaporize as the temperature increases. The vaporization effects on the crack driving force are also studied. The Ideal gas equation is employed to estimate the thermodynamic pressure due to vaporization at each time step after solving basic nodal values. A set of field equations governing the time dependent response of porous media are derived from balance laws based on the mixture theory Darcy's law Is assumed for the fluid flow through the porous media. Perzyna's viscoplastic model incorporating the Von-Mises yield criterion are implemented. The Green-Naghdi stress rate is used for the invariant of stress tensor under superposed rigid body motion. Isotropic elements are used for the spatial discretization and an iterative scheme based on the full newton-Raphson method is used for solving the nonlinear governing equations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3207-3213
• /
• 2011

Most methods of color constancy, which is the ability to determine the object color regardless of the scene illuminant, have failed to meet our expectation of their performance especially about low-illuminated scenes. Some methods with high performance need to be developed, but we must, above all else, obtain experimental images for analyzing the required circumstances or evaluating the methods. Therefore, the paper produces new sets of images so that they can be used in the development of color constancy methods suitable for low-illuminated scenes. These sets are composed of two parts: one part of images which are synthesized with spectral power distribution(SPD) of illuminants, spectral reflectance curve of reflectances, and sensor response functions of camera; the other part of images where the intensity of each image is adjusted at the uniform rate. In an experiment, the use of the sets takes an advantage that its result images are analyzed and evaluated quantitatively as their ground truth data are known in advance.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.94-103
• /
• 2016

For elevated railway station on which track is connected with superstructure of station, structural vibration level and structure-borne-noise level has exceeded the reference level due to structural characteristics which transmits vibration directly. Therefore, existing elevated railway station is in need of economical and effective vibration reduction method which enable train service without interruption. In this study, structural vibration non-transmissible system which is applied to vibroisolating material for column member is developed to reduce vibration. That system is cut covering material of the column section using water-jet method and is installed with vibroisolating material on cut section. To verify vibration reduction effect and structural performance for structural vibration non-transmissible system, impact hammer test and cyclic lateral load test are performed for 1/4 scale test specimens. It is observed that natural period which means vibration response characteristics is shifted, and damping ratio is increased about 15~30% which means that system is effective to reduce structural vibration through vibration test. Also load-displacement relation and stiffness change rate of the columns are examined, and it is shown that ductility and energy dissipation capacity is increased. From test results, it is found that vibration non-transmissible system which is applied to column member enable to maintains structural function.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.2
• /
• pp.122-130
• /
• 2016

The past few decades of industrialization enabled human-centered stream developments, which in turn resulted in constructing straight or covered streams, which are used only for sewage disposal purpose. However, these types of streams have become the cause of flood damages such as localized heavy rain. In response, various construction methods have been implemented to prevent stream and embankment damages. However, regulations regarding these measures only lay out minimum standards such as the height of slopes and the minimum angle of inclination. Moreover, examination of tractive force, the most crucial factor in preventing flood damage, is nonexistent. Therefore, this study evaluates various tractive forces by implementing a porous concrete tetrapod at a full scale artificial stream for experiment, controlling the rate of inflow, and measuring the velocity and depth of the stream under different experiment conditions. The test results of the compressive strength, and porosity and density of rock of the porous concrete tetrapod was between 16.6 and 23.2 MPa, and the actual measurement of air void was 10.1%, thus satisfying domestic standard. The result of tractive force experiment showed a limiting tractive force of $47.202N/m^2$, not satisfying the tractive force scope of $67N/m^2$ the stream design working expertise proposes. However, there was neither damage nor loss of blocks and hardpan. Based on previous researches, it can be expected that there will be resistance against a stronger tractive force. Therefore, it is necessary to conduct another experiment on practical limiting tractive force by adjusting some experimental conditions.

• Journal of the Korean Institute of Gas
• /
• v.21 no.1
• /
• pp.6-17
• /
• 2017

Objectives : The purpose of this study was to obtain information regarding Globally Harmonized System(GHS) classification and health hazards that may result from a 4 weeks inhalation exposure of 3-Methylpentane in Sprague-Dawley rats. Methods : The testing method was conducted in accordance with OECD guidelines for the testing of chemicals No. 412(Subacute Inhalation Toxicity). The Rats were divided into 4 groups(5 male and 5 female rats in each group) and exposed to 0 ppm, 284 ppm, 1,135 ppm, 4,540 ppm 3-Methylpentane in each exposure chamber for 6 h/day, 5 days/week, for 4 weeks. After two weeks, the test animals were autopsied and carried out blood test and biochemical tests and histopathological examination. We used PRISTIMA (Toxicology data management system) to confirm the system and to have confidence of the raw data. Results : No death and particular clinical presentation including weight change and change of feed rate was observed. Relationship between dose, gender and response was also not significantly changed in hematologic examination, biochemical examination of blood and blood coagulation time. The histopathologic lesions caused by the test substance did not appear. Conclusions : NOAEL(No Observable Adverse Effect Level) of 3-Methylpentane is more than 4,540 ppm in male group and female group and the Ministry of Employment and Labor Guidance Announcement No. 2013-37(criteria for the classification marks and Safety of Chemicals) Specific target organ toxicity(repeated exposure) was determined with a substance that is not the separator material.

• Archives of Plastic Surgery
• /
• v.47 no.1
• /
• pp.70-77
• /
• 2020

Background As the demand for cosmetic surgery continues to rise, plastic surgery programs and the training core curriculum have evolved to reflect these changes. This study aims to evaluate the perceived quality of current cosmetic surgery training in terms of case exposure and educational methods. Methods A 16-question survey was sent to graduates who completed their training at a U.S. plastic surgery training program in 2017. The survey assessed graduates' exposure to cosmetic surgery, teaching modalities employed and their overall perceived competence. Case complexity was characterized by the minimum number of cases needed by the graduate to feel confident in performing the procedure. Results There was a 25% response rate. The majority of respondents were residents (83%, n=92) and the remaining were fellows (17%, n=18). Almost three quarters of respondents were satisfied with their cosmetic training. Respondents rated virtual training as the most effective learning modality and observing attendings' patients/cases as least effective. Perceived competence was more closely aligned with core curriculum status than case complexity, i.e. graduates feel more prepared for core cosmetic procedures despite being more technically difficult than non-core procedures. Conclusions Despite the variability in cosmetic exposure during training, most plastic surgery graduates are satisfied with their aesthetic training. Incorporation of teaching modalities, such as virtual training, can increase case exposure and allow trainees more autonomy. The recommended core curriculum is adequately training plastic surgery graduates for common procedures and more specialized procedures should be consigned to aesthetic fellowship training.

• Journal of Plant Biotechnology
• /
• v.29 no.1
• /
• pp.45-49
• /
• 2002

The leaf and petiole segments of Farfugium japonica were cultured to investigate the influence of growth regulators on their callus induction and plant regeneration. The callus induction and growth showed a good response both leaf and petiole on MS media supplemented with 1∼2 mg/L 2,4-D and 1∼2 mg/L BA. Callus induction and growth were more effective in petiole segments than leaf one. The highest percentage of plant regeneration was obtained from 60-day-old calli on MS medium supplemented with 1 mg/L NAA and 2 mg/L BA. When subcultured to the same medium for about 60 days, multiple shoots were developed from regenerating callus. The shoots produced roots after transferring to rooting medium containing 0.5 mg/L IAA. The plantlets over 50 mm in height were successfully acclimatized in vermiculite, and the survival rate was over 95%.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.4
• /
• pp.436-448
• /
• 2000

Objectives : To identify the factors affecting users' satisfaction with the Order Communicating System(OCS) and to highlight the factors important for the successful establishment of OCS. Methods : A Users Satisfaction survey was sent to 4,513 people, consisting of 1,503 doctors, 2,379 nurses, 255 pharmacists and 370 administrative workers in 16 hospitals which had introduced OCS. The response rate was 63.9%. Measurement of users' satisfaction was peformed with the instrument which was used in Doll's study. Some aspects of Doll's instrument were adjusted according to the aims of this study. The classifying sections of this survey included age, job and status classification, computer experience, OCS education, duration of daily OCS use, type of order entering, number of personnel in the Hospital Information System's department, cost of OCS, problem frequency, proportion of work managed by hand, OCS type, and Hospital establishment type. Results : There was a positive correlation between satisfaction level and managerial status throughout all job classifications. Irrespective of the importance of OCS education as a factor relating to users' satisfaction, the additional work load caused by OCS lowered users' satisfaction. Different factors affected users' satisfaction according to job and status classification. The composition of factors affecting the pharmacist and administrative worker satisfaction levels was simpler than that of the doctor and nurse levels. There were no statistically significant differences between the actual computer experience duration of daily OCS use and users' satisfaction with OCS. Conclusions : There was an understandable relationship between users' attitude to OCS and factors affecting users' satisfaction. The results of this study could be used as a basis for the successful expansion of the operation of OCS. But more detailed studies on users' satisfaction and further improvements of methodologies are required for the successful establishment of OCS.

• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1649-1653
• /
• 2007

High temperature stresses have caused growth inhibition and delayed heading in highland cultivation Chinese cabbage during summer in Korea. We have studied high temperature stress responses in the terms of changes of inorganic components and proteins by proteomic analyses. Insufficiencies of nitrogen and phosphorus have affected growth rate and calcium deficiency has caused blunted heading. Proteins extracted from Brassica seedling grown at the altitude of 600m and 900m in the Mount Jilun were extracted and analysed by 2-dimentional polyacrylamide gel electrophoresis. Profiles of protein expression was then analyzed by 2-dimentional gel analyses. Protein spots showing different expression level were picked using the spot handling workstation and subjected to MALDI-TOF MS. Total 48 protein spots were analyzed by MALDI-TOF MS and 30 proteins spots out of 48 were identified by peptide mass fingerprinting analyses. Fourteen proteins were up-regulated in extracts from the altitude of 900m and they were identified as oxygen-evolving proteins, rubisco activase and ATPase etc. Sixteen proteins were up-regulated in extracts from the altitude of 600m and they were identified as glutathione S-transferase(1, 28kD cold induced- and 24 kD auxin-binding proteins) and salt-stress induced protein etc. These stress-induced proteins were related to the mediated protective mechanism against oxidative damage during various stresses. The results indicated that physiological phenomenon in response to high temperature stresses might be resulted by complex and multiple array of responses with drought, heat, oxidative, salt, and cold by high temperature.

• Korean Journal of Organic Agriculture
• /
• v.23 no.3
• /
• pp.481-495
• /
• 2015

The study researched germination of the plants and growth of Fungus according to concentration of aqueous extracts in order to provide basic data for developing natural agricultural resources by using Persicaria longiseta. The seed germination of Amaranthus spinosus was inhibited at 25% P. longiseta extract, while Agrostis stolonifera ssp. palustris was not affected at all concentrations tested. Especially, the seed germination rate and fresh weight of Trifolium incarnatum at 20% P. blumei extract were higher than those of control plot. The early growth of most receptor plant seedlings was promoted at 25% and 50% of P. blumei extracts, but the radicle growth of all receptor plants was significantly inhibited at > 25% of P. longiseta extract. The response of receptor plants to P. longiseta extract was different according to the plant species and the plant parts. The growth of plant pathogenic fungus in PDA medium showed an increasing inhibition tendency with increasing concentrations of P. longiseta extract. Especially, P. longiseta extract showed the greatest antimicrobial activity against Phytophthora infestans, Phythium graminicola, and Pythium venterpoolii. The content of total phenolic compound in P. longiseta was higher in leaves (1082.3 mg/L) but lower in roots (228.6 mg/L) and stems (207.8 mg/L), which is an allelopathic chemical. As these results are summarized, P. longiseta have competitive advantage because they release phenolic compounds with allelopathic effect and affect on germination, growth and fungi growth on underground flora compared to native plants and they have eligibility for natural herbicide and germicide.