• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1334-1339
• /
• 2006

Dynamic response of buried pipelines both in the axial and the transverse directions on concrete pipe and steel pipe, FRP pipe were investigated through a forced vibration analysis. The dynamic behavior of the buried pipelines for the forced vibration is found to exhibit two different forms, a transient response and a steady state response, depending on the time before and after the transfer of a seismic wave on the end of the buried pipeline. The former is identified by a slight change in its behavior before the sinusoidal-shaped seismic wave travels along the whole length of the pipeline whereas the latter by the complete form of a sinusoidal wave when the wave travels throughout the pipeline. The transient response becomes insignificant as the wave speed increases. From the results of the dynamic responses at the many points of the pipeline, we have found that the responses appeared to be dependent critically on the boundary end conditions. Such effects are found to be most prominent especially for the maximum values of the displacement and the strain and its position.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.4 s.235
• /
• pp.614-623
• /
• 2005

This study aims to perform the characteristic evaluation of surface grinding for the STD11 material with experimental and analytic techniques based on the response surface model. The grinding force acting on the workpiece and the ground surface roughness were measured according to the change of grain size, table speed and depth of cut. The effect of spark-out on the grinding force and the surface roughness was also characterized. The frictional coefficient between workpiece and grinding wheel could be determined by the analysis of spark-out effect. From the experimental data, the second-order response surface models were developed to predict the grinding force and the surface roughness. Validation of the developed model was examined.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.253-257
• /
• 2003

Theoretical-numerical analysis of wave instability is conducted with parametric response function model. Fluctuating instantaneous mass evaporation rate functionally coupled with pressure perturbations with phase lag is assumed to examine the validity of the method. With sufficiently large amplitude and less phase lag to perturbation, combustion response is resonant to pressure waves, unstable waves are amplified, and the system is driven to instability. Magnitude of response is a crucial instability parameter in the determination of a stability margins and makes a critical change of balancing conditions between the amplifying and damping acoustic energies. In the phase regime the unstable waves are amplified, whereas, the acoustic waves are attenuated in the out-of-phase regime. In the intermediate regime, no distinct tendency of unstable waves was determined.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.829-834
• /
• 2000

This paper is primarily directed toward analyzing the transient response characteristics in hydraulic pipe lines. The exact solution to the transient response characteristics was obtained by using the complicated transfer function derived by Iberall. The discrepancy with the exact and approximate is small, so the approximate solution is adopted to the theoretical one. An equation was derived which describes the pressure times relationship Hat occurs at the end of volume terminated transmission line following a sudden pressure change at its inputs. As a result, It is found that the density has relationship about the Wave Propagation is very useful in analyzing the transient response characteristics of hydraulic pipe lines. The velocity of Pressure wave Propagation decreases as the density of fluid increased.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.1
• /
• pp.35-45
• /
• 1991

A linear quarter model of a vehicle suspension system is built and simulated. Especially the so-called sensitivity analysis is conducted in order to show its applicability to design problems, and sensitivity function is determined in the frequency domain. The change of frequency response function is predicted, which depends on the design parameter variation and the property is verified by computer simulation. Typical performance measures, namely, sprung mass acceleration, suspension deflection, and tire deflection are examined. The vehicle model is analyzed for ist performance sensitivity as a function of the system's feedback gains. The variable feedback gains are selected as the spring and damping coefficients. Frequency response, RMS response, and performance index of the performance evaluation variables are considered and three-dimensional and contour plots of response surfaces are formed to examine output sensitivity to suspension feedback. Performance trade-offs over the entire frequency spectrum are identified from the FRF, and that between ride quality and handling characteristics are examined from the RMS responses.

• Communications for Statistical Applications and Methods
• /
• v.6 no.3
• /
• pp.761-770
• /
• 1999

A combination procedure of successive occasions sampling and randomized response method is investigated. Randomized response technique is very simple for use in a telephone survey of a sensitive subject. In the suggested randomized response method. the interviewee replies "yes" or "no" to a randomly selected question and the investigator can estimate the proportion of "yes" or "no" answer. When this procedure is used on successive occasions, not only the proportion supporting a candidate and the time change in this supporting proportion can be derived but also the voters' swing in the trend of voters' support can be estimated. A numerical example is given to show how the suggested sampling strategy can be applied to a practical telephone survey.

• Journal of Radiation Industry
• /
• v.2 no.3
• /
• pp.111-119
• /
• 2008

Microarrays can measure the expression of thousands of genes to identify the changes in expression between different biological states. To survey the change of whole Salmonella genes after a relatively high dose of gamma radiation (1 kGy), transcriptome dynamics were examined in the cells by using DNA microarrays. At least 75 genes were induced and 89 genes were reduced two-fold or more after irradiation. Several genes located in pSLT plasmid, cyo operon, and Gifsy prophage were induced along with many genes encoding uncharacterized proteins.While, the expression of genes involved in the virulence of Salmonella as well as metabolic functions were decreased. Although the radiation response as a whole could not be illustrated by using DNA microarrays, the data suggest that the response to high dose of irradiation might be more complex than the SOS response.

• Korean Journal of Agricultural Science
• /
• v.44 no.2
• /
• pp.296-307
• /
• 2017

Globally, consumers' enormous and increasing appetite for meat is one of the biggest causes of climate change because livestock industry emits more greenhouse gas than transportation. The purpose of this study is to analyze consumer awareness about the impact of meat consumption on sustainability in response to climate change. Based on the theory of planned behavior, the attitudes, subjective norms, perceived behavioral control, prior knowledge, and risk perception variables were analyzed to evaluate the impact of climate change awareness over consumer behavior on meat consumption. Major findings are as follows: consumers were aware of climate change but has made few changes to their meat consumption. In addition, changes in meat consumption were found to be caused by health safety concerns, such as disease outbreaks. Significant variables related to meat consumption patterns associated to climate change impacts were household income, age, attitude, subjective norm, perceived behavioral control, and prior knowledge. These results suggest some implications for policy. There is a need for public relations and education to make the public aware of and better understanding of link between climate change and diet. Also, government should make efforts to raise awareness of mitigation of climate change such as comprehensive food labels which are identifying lesser impacts on climate and better dietary guideline instructions which would include coping with climate change.

• Microbiology and Biotechnology Letters
• /
• v.25 no.3
• /
• pp.240-247
• /
• 1997

Bacillary is the most common form of H. pylori observed during human infection. However, it is known that the morphology change of H. pylori from bacillary to coccoid can be occurred with a response to the environmental stresses such as the nutrient depletion, accumulation of toxic metabolites, pH alteration, and exposure to antimicrobial agents. The coccoid form of H. pylori, which is viable but non-culturable in vitro, seems to be the major cause of antibiotic resistancy and high reinfectability of H. pylori. In this regard, we studied the environmental factors that can induce the morphological change in vitro of H. pylori, and the change of fatty acid composition of plasma membrane. The morphological change from bacillary to coccoid could be observed with the depletion of nutrients, pH variation and reactive oxygen species added in the culture media. This morphologic conversion was paralleled by a dramatic decrease in unsaturated fatty acids and an increase in saturated fattv acids of plasma membrane. The change in composition of membrane fatty acid seems to be a kind of protection mechanism of H. pylori against these environmental stresses.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.126-130
• /
• 2003

The term stress is currently used to cover a wide variety of phenomena, ranging from physical to social and cultural factors. The term has defined psychological stress as an imbalance between perceived or subjective demand and perceived response capability. The behavior science model has provided the accident proneness through the life change unit factors considering human behavior, life style, ideas, culture, and psychological state. Therefore, this paper presents the Korean life change unit model through statistical testing with the proposed life change unit factors on the unmarried workers living in the middle area. The proposed model can be simply used in real fields in order to minimize the industrial accidents.