Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Grinding Characteristic Evaluation and Development of Response Surface Models in Surface Grinding Process

평면연삭에서 가공특성 평가 및 반응표면모델 개발

  • 곽재섭 (부경대학교 기계공학부)
  • Published : 2005.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study aims to perform the characteristic evaluation of surface grinding for the STD11 material with experimental and analytic techniques based on the response surface model. The grinding force acting on the workpiece and the ground surface roughness were measured according to the change of grain size, table speed and depth of cut. The effect of spark-out on the grinding force and the surface roughness was also characterized. The frictional coefficient between workpiece and grinding wheel could be determined by the analysis of spark-out effect. From the experimental data, the second-order response surface models were developed to predict the grinding force and the surface roughness. Validation of the developed model was examined.

Keywords

References

  1. Kwak, J.S. and Ha, M.K., 2002, 'Evaluation of Wheel Life by Grinding Ratio and Static Force,' KSME International Journal, Vol. 16, No. 9, pp. 1072-1077
  2. Kwak, J.S. and Ha, M.K., 2004, 'Detection of Dressing Time Using the Grinding Force Signal Based on the Discrete Wavelet Decomposition,' International Journal of Advanced Manufacturing Technology, Vol. 23, No. 1-2, pp. 87-92 https://doi.org/10.1007/s00170-003-1556-7
  3. Kwak, J.S. and Ha, M.K., 2004, 'Neural Network Approach for Diagnosis of Grinding Operation by Acoustic Emission and Power Signals,' Journal of Materials Processing Technology, Vol. 147, No. 1, pp. 65-71 https://doi.org/10.1016/j.jmatprotec.2003.11.016
  4. Shaji, S. and Radhakrishnan, V., 2003, 'Analysis of Process Parameters in Surface Grinding with Graphite as Lubricant Based on the Taguchi Method,' Journal of Materials Processing Technology, Vol. 141, No. 1, pp.51-59 https://doi.org/10.1016/S0924-0136(02)01112-3
  5. Dhavlikar, M.N., Kulkarni, M.S. and Mariappan, V., 2003, 'Combined Taguchi and Dual Response Method for Optimization of a Centerless Grinding Operation,' Journal of Materials Processing Technology, Vol. 132, No. 1-3, pp. 90-94 https://doi.org/10.1016/S0924-0136(02)00271-6
  6. Kopac, J., Bahor, M. and Sokovic, M., 2002, 'Optimal Machining Parameters for Achieving the Desired Surface Roughness in Fine Turning of Cold Pre-formed Steel Workpieces,' International Journal of Machine Tools & Manufacture, Vol. 42, No. 6, pp. 707-716 https://doi.org/10.1016/S0890-6955(01)00163-8
  7. Lin, T.R., 2002, 'Experimental Design and Performance Analysis of TiN-coated Carbide Tool in Face Milling Stainless Steel,' Journal of Materials Processing Technology, Vol. 127, No. 1, pp. 1-7 https://doi.org/10.1016/S0924-0136(02)00026-2
  8. Lin, T.R., 2003, 'The Use of Reliability in the Taguchi Method for the Optimization of the Polishing Ceramic Gauge Block,' International Journal of Advanced Manufacturing Technology, Vol. 22, No. 3-4, pp. 237-242 https://doi.org/10.1007/s00170-002-1465-1
  9. Kulkarni, M.S. and Mariappan, V., 2003, 'Multiple Response Optimization for Improved Machined Surface Quality,' Journal of Materials Processing Technology, Vol. 141, No. 2, pp. 174-180 https://doi.org/10.1016/S0924-0136(02)01017-8
  10. Gopal, A.V. and Rao, P.V., 2003, 'Selection of Optimum Conditions for Maximum Material Removal Rate with Surface Finish and Damage as Constraints in SiC Grinding,' International Journal of Machine Tools & Manufacture, Vol. 43, No. 13, pp. 1327-1336 https://doi.org/10.1016/S0890-6955(03)00165-2
  11. Hogg, R.V. and Ledolter, J., 1992, Applied statistics for engineers and physical scientists, Macmillan Publishing Company, New York, pp. 403-417