• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.785-798
• /
• 2018

Since the Framework Act on Resource Circulation was enacted in 2018, the government should establish a National Resource Circulation Master Plan every 10 years, which defines mid- to long-term policy goals and directions on the efficient use of resources, prevention of waste generation and recycling of waste. In addition, we must set mid- to long-term and stepwise targets for the final disposal rate, recycling rate (based on sorted recyclable materials and recycled products), and energy recovery rate of wastes, and relevant measures should be taken to achieve these targets. However, the current industrial waste (IW) statistics have limitations in setting these targets because the final disposal rate and recycling rate are calculated as the ratio of the recycling facility input to the IW generation. In this study, the material flow from the collection stage to the final disposal of industrial waste was analyzed based on the generation of 2016, and the actual recycling amount, actual incineration amount, final disposal amount and their rates were calculated. The effect on the recycling, incineration and final disposal rates was examined by changing the treatment method of nonhazardous wastes from the factory and construction and demolition wastes, which were put in landfills in 2016. In addition, the variation of the waste treatment charge was investigated according to the change of treatment methods. The results of this study are expected to be effectively used to establish the National Resource Circulation Master Plan and industrial waste management policy in the future in South Korea.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.1
• /
• pp.51-57
• /
• 2016

This study is conducted to find out the problems of the public food waste recycling facility operation and its improvement. In order to save the national budget by analyzing plans to expand including operation rate for the food waste recycling facility, the alternative ways are suggested. The result can be as follows: Policy switch is required not only to save budget and stable disposal of food waste but also to promote resource recycling rather than expanding public facilities. In order to change the policy for stable and eco-friendly disposal of food waste, it is necessary to adopt semipublic system that prevent the decline of the rate of operation of private resource recycling facility. Furthermore, it is required to prepare both qualified technologies of public resource recycling and the ways of profitability secure.

• Resources Recycling
• /
• v.22 no.3
• /
• pp.3-17
• /
• 2013

Recently, the importance of efficient resource management has been highlighted due to the uncertainty of its security. Korea has thus made an effort to improve the resource productivity in various fields such as the increase of recycling rate and the establishment of methodical resource management system. It is still necessary to draw the innovative improvement measure of national resource efficiency. This study derives major issues of recycling potential in the domestic industry by analyzing the current status of generation, treatment and recycling of industrial wastes in Korea. Futhermore, main tasks for promoting the improvement of national resource efficiency through the recycling of industrial wastes in Korea have been proposed based on the results of this study with the comparison of Japan's situation.

• Resources Recycling
• /
• v.9 no.2
• /
• pp.3-10
• /
• 2000

Used aluminum beverage can(UBC) is an important secondary resource. Domestic recycling rate of UBC should be increased from the standpoint of resource savings and environmental protection. Aluminum can to can recycling is divided into two steps. The first step was composed of the processes such as collection of used beverage cans, shredding, magnetic separation, de-lacquring, melting and casting. The second is remelting and casting, heat treatment, hot and cold rolling, annealing, and can making. With brief discussion about this recycling technology, this article covers aluminum can consumption, the present state of aluminum can recycling in Korea, Japan, USA, and Europe.

• Resources Recycling
• /
• v.24 no.2
• /
• pp.69-78
• /
• 2015

Recently, the importance of efficient resource management has been highlighted due to the uncertainty of its security. Developed countries promote the legislative provision and transition of industrial structure to maximize the efficiency of resource use through supporting the sustainable resource management at national level. Meanwhile Korea has very sensitive industrial structure along with the international resource supply and demand conditions. It is acutely necessary to improve the resource productivity with the various action plans such as the increase of recycling rate and the establishment of methodical resource management system. Especially, the study on the direction of each flow stage and the concrete action plans for using resource efficiently in the life-cycle of resource will be required. Therefore, this study suggests the future direction of each flow stage(production stage and circulatory stage), and the concrete action plans to improve the present problems of resource management in Korea.

• Resources Recycling
• /
• v.23 no.2
• /
• pp.26-36
• /
• 2014

The materials flow of copper can be analyzed into up-stream and down-stream stages based on the literature survey. Discharge and recycling stages in the down-stream have been particularly analyzed through the field survey. The waste nickel resources circulation flow may conveniently be grouped into 4 stages discharge import, collection disuse, resource recovery and product production export, the resources mainly consist of copper scrap and stainless steel scrap in 2010. The resource circulation rate of 36.83% is obtained from the above flow. Various plans are therefore, suggested in each stage to increase resource circulation rate. At discharge import stage, it is suggested to consider this kind of waste as an important resources if it is appropriately classified in detail, basides applying quota tariff to this kind of waste. At collection disuse stage, the plan of stabilizing supply and demand is suggested through the improvement of bidding system. Resources professional cycling stage crushing and grinding companies foster coexistence between large and small plans and strategies were suggested. At product production export stage, the integrated approval is suggested approval for licensing to register units as waste-treating facilities instead of exempting registration under the present condition to activate recycling industries.

• Journal of Environmental Science International
• /
• v.12 no.3
• /
• pp.359-366
• /
• 2003

Ecological society and energy conservative systems has become a subject of world wide attention. To examine the technologies of such systems as resource recycling society, this study is proposed for using rainwater as energy source and water resources in urban area. Useful informations for planning of utilizing rainfall as energy source, water resources, emergency water and controlling flood are discussed with model systems in urban area. It is calculated that the rate of utilizing rainwater, amounts of utilizing rainwater, substitution rate of supply water, amounts of overflow rainwater according to rain storage tank volume. By applying the past weather data, The optimum volume of rain water storage was calculated as 200m$^3$ which mean no benefits according to the increase of storage tank volumes. For optimum planing and control method at the model system, several running method of rainwater storage tank was calculated. The optimum operating method was the using weather data as 3hours weather forecast.

• Resources Recycling
• /
• v.20 no.6
• /
• pp.43-49
• /
• 2011

This study calculated the three indices of Korea's resource productivity (and raw material productivity), material circulation rate and decoupling factor to evaluate the sustainability of domestic economic activities and resource consumption and examine the extent of dematerialization. Korea's resource productivity improved 22% from 1.32 million KRW/ton in 2000 to 1.61 million KRW/ton in 2007, with the annual average growth of resource productivity during the period standing at 2.88%. Raw material inputs accounted for 73-76% of domestic material consumption (DMC); raw material productivity for the year 2007 was 2.11 million KRW/ton, growing 3% on annual average from 2000 through 2007. The wastes released are circulated into the economic system through recycling and energization. Korea's material circulation went up from 10.9% in 2000 to 15.6% in 2007, growing by an annual average of 5.3% during the period. The rate of change in year-on-year growth, however, was found to be on the gradual decrease. This study also showed that Korea's economic activities were decoupled with its resource consumption as the country heads toward dematerialization through sustainable resource management.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.1
• /
• pp.41-49
• /
• 2016

This study is conducted to find out problems of the public food waste recycling facility and its improvement. Through a research on the actual condition, it is possible to analyze the problem of operation. Moreover, for this improvement, with analysis of the current state of recycling rate including its generation and the problem that can be shown from the real operation of the public/private food waste recycling facility, the results are as follows: It can be shown that the current amount of domestic food waste resource recycling is about 97 %. Almost every public recycling facility is analyzed to be economically infeasible and is not for recovery but to simple disposal. Especially, most of Biogas facilities appeared that amount of production and demand is not appropriate differed from enforcement design.

• Resources Recycling
• /
• v.14 no.3
• /
• pp.6-15
• /
• 2005

The overall area of Taiwan is 36,006 km$^2$ and population was about 22,535,000 persons in 2003. The population density became 625persons/km$^2$. The economic of Taiwan progress since 1970. Gross national production in 2004 increased by 2.3 trillion or 493% relative to 1981. The number of automobiles in 1981 was 821,862, and increase to 6,389,186 in 2004. The number of motorcycles in 1981 were 4,591,547 and increase to 12,793,950 in 2004. The vehicle growth rate of automobile and motorcycle was 677% and 178% respectively. The recycling end-of-life vehicles(ELVs) is specified in the Waste Disposal Act. Its main content is the system of asking the vehicle manufacturer and importing agents, who are responsible for recycling of the ELVs. The recycling task on ELVs was startedinitially in 1993. It is required that the manufacturers and importing agents deposit certain ratios of Waste Vehicle Disposal Fees proportional to the number of vehicle they manufacture and import into Taiwan under sales. This report will introduce the current status of ELVs recycling in Taiwan, and the future direction, as well as measures proceeding for the EPA- Fund Management Committee(RMFC) operating in the fiture.