• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3C
• /
• pp.159-165
• /
• 2010

The problems such as natural resource exhaustion, pollutant emission and waste generation are increasing worldwide with the industrial development. The quantity of the industrial by-product in Korea is 6 million tons a year, and even its basic treatment processes including landfill, incineration and storage have reached their limits. In this study, fly ash and silica fume were applied to shotcrete to develop a method for the reuse of resources and to increase the use of fly ash, which is an industrial waste. An environmental hazard evaluation is a must to actively address the worldwide environmental problems, though. Therefore, an environmental impact assessment was conducted using the chemical content analysis test and heavy metal exudation test, for ten mixtures that were obtained through the pre-mixing and compressive strength tests. The results of the compressive strength test showed that all mixtures satisfied national and international standards. Cr, Cd and Hg were not detected, and Pb was detected only in some cases with fly ash. Cu and As were detected in all mixtures, but all of them satisfied national and international standards.

• ANNALS OF ANIMAL RESOURCE SCIENCES
• /
• v.30 no.4
• /
• pp.165-171
• /
• 2019

The objective of this study was to investigate the effects of gender on meat quality traits and sensory characteristics of pork loin. A total of 90 pork carcasses (180 days old, 45 barrows and 45 gilts, each gender group was consisted of fifteen 1+, 1 and 2 carcass grades) were selected and loin cuts were excised to investigate meat quality, electronic tongue measures and sensory panel test. There were significant differences in drip loss (1.66% vs 1.21%), released water (12.19% vs 10.68%) and cooking loss (23.67% vs 21.04%) between loins from barrow and gilt (p<0.05). However, no significant differences in meat color (CIE L^* a^* b^*) and shear force were observed between gender groups (p>0.05). Umami and richness values of barrow were significantly higher than those of gilt, while barrow had significantly lower sourness value compared to gilt(p<0.05). On the sensory evaluation, barrow scored higher in flavor, juiciness and tenderness both, and as a result, barrow (5.51 points) also scored significantly higher than gilt (4.86 points). These results suggest that the umami intensity and sensory taste of barrow loin are superior to gilt loin due to its high water-holding capacity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.88-93
• /
• 2024

To evaluate the possibility as a multi-level memory medium for the Ge₂Sb₂Te₅/TiN/W-doped Ge₂Sb₂Te₅ cell structure, the crystallization rate and stabilization characteristics according to voltage (V)- and current (I)- pulse sweeping were investigated. In the cell structures prepared by a magnetron sputtering system on a p-type Si (100) substrate, the Ge₂Sb₂Te₅ and W-doped Ge₂Sb₂Te₅ thin films were separated by a barrier metal, TiN, and the individual thicknesses were varied, but the total thickness was fixed at 200 nm. All cell structures exhibited relatively stable multi-level states of high-middle-low resistance (HR-MR-LR), which guarantee the reliability of the multilevel phase-change random access memory (PRAM). The amorphousto-multilevel crystallization rate was evaluated from a graph of resistance (R) vs. pulse duration (T) obtained by the nanoscaled pulse sweeping at a fixed applied voltage (12 V). For all structures, the phase-change rates of HR→MR and MR→LR were estimated to be approximately t<20 ns and t<40 ns, respectively, and the states were relatively stable. We believe that the doublestack structure of an appropriate Ge-Sb-Te film separated by barrier metal (TiN) can be optimized for high-speed and stable multilevel PRAM.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1371-1388
• /
• 2023

Floods are becoming more severe and frequent due to global warming-induced climate change. Water disasters are rising in Korea due to severe rainfall and wet seasons. This makes preventive climate change measures and efficient water catastrophe responses crucial, and synthetic aperture radar satellite imagery can help. This research created 1,423 water body learning datasets for individual water body regions along the Han and Nakdong waterways to reflect domestic water body properties discovered by Sentinel-1 satellite radar imagery. We created a document with exact data annotation criteria for many situations. After the dataset was processed, U-Net, a deep learning model, analyzed water body detection results. The results from applying the learned model to water body locations not involved in the learning process were studied to validate soil water body monitoring on a national scale. The analysis showed that the created water body area detected water bodies accurately (F1-Score: 0.987, Intersection over Union [IoU]: 0.955). Other domestic water body regions not used for training and evaluation showed similar accuracy (F1-Score: 0.941, IoU: 0.89). Both outcomes showed that the computer accurately spotted water bodies in most areas, however tiny streams and gloomy areas had problems. This work should improve water resource change and disaster damage surveillance. Future studies will likely include more water body attribute datasets. Such databases could help manage and monitor water bodies nationwide and shed light on misclassified regions.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.1
• /
• pp.33-40
• /
• 2024

The volume of shells, a prominent form of marine waste, is steadily increasing each year. However, a significant portion of these shells is either discarded or left near coastlines, posing environmental and social concerns. Utilizing shells as a substitute for traditional aggregates presents a potential solution, especially considering the diminishing availability of natural aggregates. This approach could effectively reduce transportation logistics costs, thereby promoting resource recycling. In this study, we explore the feasibility of employing wasted shell aggregates in 3D concrete printing technology for marine structures. Despite the advantages, it is observed that 3D printing concrete with wasted shells as aggregates results in lower strength compared to ordinary concrete, attributed to pores at the interface of shells and cement paste. Microstructure characterization becomes essential for evaluating mechanical properties. We conduct an analysis of the mechanical properties and microstructure of 3D printing concrete specimens incorporating wasted shells. Additionally, a mix design is proposed, taking into account flowability, extrudability, and buildability. To assess mechanical properties, compression and bonding strength specimens are fabricated using a 3D printer, and subsequent strength tests are conducted. Microstructure characteristics are analyzed through scanning electron microscope tests, providing high-resolution images. A histogram-based segmentation method is applied to segment pores, and porosity is compared based on the type of wasted shell. Pore characteristics are quantified using a probability function, establishing a correlation between the mechanical properties and microstructure characteristics of the specimens according to the type of wasted shell.

• Quality Improvement in Health Care
• /
• v.30 no.1
• /
• pp.33-43
• /
• 2024

Purpose:The acute hospital accreditation program launched in South Korea has shown positive effects on safety culture and quality of care. However, relative weights have not yet been investigated for accreditation criteria with a hierarchical structure. This study aimed to derive the relative weights of acute-care hospital accreditation criteria. Methods: We conducted an online survey using the analytic hierarchy process (AHP) technique to assess the validity, importance, and urgency of acute hospital accreditation criteria. The AHP online survey link was distributed in November 2022 after obtaining informed consent from 10 experts in hospital accreditation. Results: 'Basic value system' ranked highest, while 'patient care system' ranked second in terms of validity, importance, and urgency. 'Performance management system' had the lowest validity and urgency, while 'organizational management system' carried the lowest importance. Within the 'patient care system' domain, 'surgery and anesthesia sedation management' scored highest in validity and importance, and 'patient care' scored highest in urgency. 'Care delivery system and evaluation' received the lowest scores for all three aspects. In the 'organizational management system' domain, infection control ranked highest in terms of validity, importance, and urgency. The lowest validity was observed for 'management and organizational operation' and the lowest importance and urgency were noted for 'human resource management'. Conclusion: The weights for validity, importance, and urgency, as shown in each domain and chapter, and the number of measurable elements included, are largely inconsistent. This study will contribute to the development of the structure and scientific improvement of accreditation standards.

• Land and Housing Review
• /
• v.15 no.2
• /
• pp.57-71
• /
• 2024

This study aims to develop an evaluation method for solar power facilities considering disaster impacts and to analyse the vulnerabilities of existing facilities. Haenam-gun in Jeollanam-do, where the reassessment of existing facilities is urgent, was selected as the study area. To evaluate the vulnerability from a more objective perspective, principal component analysis and entropy methods were utilised. Seven vulnerability assessment indicators were selected: maximum hourly rainfall, maximum wind speed, number of typhoon occurrence days, number of rainfall days lasting more than five days, maximum daily rainfall, impermeable area ratio, and population density. Among these, maximum hourly rainfall, maximum wind speed, maximum daily rainfall, and number of rainfall days lasting more than five days were found to have the highest weights. The overlay of the derived weights showed that the southeastern regions of Haenam-eup and Bukil-myeon were classified as Grade 1 and 2, whereas the northern regions of Hwawon-myeon, Sani-myeon, and Munnae-myeon were classified as Grade 4 and 5, indicating differences in vulnerability. Of the 2,133 facilities evaluated, 91.1% were classified as Grade 3 or higher, indicating a generally favourable condition. However, there were more Grade 1 facilities than Grade 2, highlighting the need for countermeasures. This study is significant in that it evaluates solar power facilities considering urban disaster resilience and is expected to be used as a basic resource for the installation of new facilities or the management and operation of existing ones.

• Tunnel and Underground Space
• /
• v.34 no.1
• /
• pp.15-27
• /
• 2024

In this case study, detailed survey of the Excavation Damaged Zone (EDZ) evaluation for the deep geological repository for high level nuclear waste was conducted. Oversea and Domestic case studies were compiled and investigated. EDZ is considered a crucial factor in the performance assessment of spent fuel disposal, leading to numerous studies worldwide aiming to understand the characteristics of the EDZ and quantitatively assessment of its extent through field and laboratory tests at Underground Research Laboratory (URL) sites. To enhance the understanding of EDZ, this study begins with defining and exploring the history of EDZ, compiling factors influencing EDZ, and summarizing the impacts caused by EDZ. Subsequently, an analysis of EDZ and rock properties is performed, followed by presenting generalized outcomes, limitations drawn from previous research, and proposing future research directions.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.6
• /
• pp.51-65
• /
• 2023

The Jeongmaeks are Korea's unique forest space recognition system that diverged from the Baekdudaegan. The Jeongmaeks are easily exposed to pressure because it is adjacent to the living area. Among them, Nakdong-Jeongmaek has high biodiversity, but damage is accelerating. According to the Convention on Biological Diversity (CBD) in 2022, the target is to expand the area of terrestrial and marine protected areas to 30% of national territory by 2030. As of September 2023, the area of terrestrial protected areas in South Korea is only 16.97% of the country's territory. This is due in part to the high proportion of private forests in the region, which makes it difficult to establish protected areas. Therefore, there is a need to establish Other Effective Area-based Conservation Measure (OECMs), which pursue complex and effective conservation that considers multiple values, as an alternative to protected areas. This study aims to identify areas suitable for OECM and to provide opinions on the establishment of appropriate management plans for each value using SOM and InVEST Habitat Quality model. This study evaluated the habitat quality of 206 villages located within 1km of the Nakdong-Jeongmaek and compared the characteristics of villages classified by SOM. As a result, the habitat quality was 0.867 for Tourism village (ClusterIV), 0.838 for Conservation village (ClusterVI), 0.835 for Mixed village (ClusterI), 0.796 for Production (ClusterV), 0.731 for Rural village (ClusterIII) and 0.625 for Urban village (ClusterII). When the distribution was identified through statistical analysis, the Kruskal-Wallis test showed that the distributions were not identical, with a p-value of 1.53e-08. Dunn's test showed a difference between Tourism, Conservation and Rural, Urban village. However, Mixed village was overestimated due to the lack of villages and the small area included in the study area. Moreover, Conservation village was somewhat under-evaluated in the analysis due to the use of a single weight for protected areas. It is necessary to perform additional reinforcement of the value evaluation of Jeongmaeks by conducting Forest Resource Survey and the National Natural Environment Survey. Therefore, we believe that sufficient validity for the establishment of OECMs in the Nakdong-Jeongmaek can be provided by addressing these limitations and conducting additional research.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.4
• /
• pp.121-132
• /
• 2024

This study attempted to determine the effects of job stress, nursing problem-solving ability, nursing work performance, and job stress and nursing problem-solving ability on nursing work performance according to the MBTI type of nurses. The study subjects were 141 nurses working at a medical institution in G Province, and data collection was conducted from March 01 to March 31, 2024. The collected data were analyzed using correlation and multiple regression analysis. Among the psychological function types of MBTI, the SF type (sympathetic and friendly type) was the most common, and among the psychological temperament types, the SP type (sensuous and open type) was the most common. Nursing work performance had a negative correlation with job resource stress, a positive correlation with nursing problem-solving ability, and a positive correlation with problem recognition, information collection, planning ability, and evaluation. The variable that had a significant impact on nursing work performance was job resources, and problem recognition, a subfactor of nursing problem-solving ability, was found to be the best predictor of nursing work performance, followed by planning ability. The explanatory power was 17.8%. The results of this study are expected to be used as basic data to develop efficient nursing management guidelines by not only improving understanding of the personality of nurses but also investigating factors related to nurses' work performance. Through the development of programs and measures to improve nursing performance, it is necessary to revitalize programs, provide educational opportunities, and provide institutional support from hospital organizations to enable high-quality nursing care through skilled nursing work.