• Journal of electromagnetic engineering and science
• /
• 제10권3호
• /
• pp.127-131
• /
• 2010

In this paper, the problem of electromagnetic transmission via slits in a cavity inside a conducting screen of finite thickness has been considered in the case that the transverse electric(to the slit axis) polarized plane wave is incident on a slit. The problem is solved numerically by the method of moments and the results are compared with those obtained from an equivalent circuit suitable for a case in which the slit width is infinite and the structure is modified to the two partially overlapped conducting planes. It is observed that when the cavity is resonated, the effective slit width reaches its maximum value of $1/\pi$ wavelengths, irrespective of the actual slit width and the incidence angle. When the thickness of the conducting plane is much smaller than the wavelength, the numerical results for the effective slit width(or transmission width) agree well with those obtained from the equivalent circuit, even though the slit is as narrow as the thickness of the conducting plane.

• 한국전자파학회논문지
• /
• 제19권2호
• /
• pp.223-230
• /
• 2008

본 논문에서는 magneto-dielectric material을 이용하여 CRLH-TL 안테나를 소형화 시키는 방법을 제안하였다. 제안된 안테나는 patch와 via를 이용하여 구현한 mushroom 구조의 CRLH-TL 안테나에 SRR을 이용한 magneto-dielectric material을 장하한 구조이다. 시뮬레이션을 통해 SRR의 동작 특성을 살펴보았고, SRR을 이용하여 기판의 투자율 값을 증가시킬 수 있음을 확인하였다. 또한, magneto-dielectric material을 이용함으로써 CRLH-TL 안테나의 공진 주파수를 감소시킬 수 있음을 확인하였다. -1차 공진 모드에서 7.13 %, 0차 공진 모드에서 23.9 %의 주파수 감소 효과를 얻을 수 있었다. 0차 공진 모드에서 동작하는 안테나를 제작하여 반사 손실과 방사 패턴을 살펴보았다. 제작된 안테나의 동작 주파수는 1.888 GHz이며, 측정된 대역폭은 0.48 %이고, 이득은 0.534 dBi, 효율은 51.7 %이다.

• 한국전자파학회논문지
• /
• 제10권6호
• /
• pp.847-854
• /
• 1999

본 논문에서는 2차원 유한차분 시간영역 방법을 사용하여 균일 평변 전송선로의 고차 모드 주파수 분산 특성을 해석하였다. 전자계 스펙트럼의 크기만을 사용하는 기존 방볍과는 달리, 퓨리에 계수의 크기 및 위상 특성을 동시에 사용함으로써, 다른 공진모드에 비하여 스펙트럼의 크기가 상대적으로 착을 경우에도 모드 식 별이 용이하도록 하였다. 수치해석 결과, 20 GHz 이내에서 스트립 선로에서는 고차 모드가 몇 개 발생되지 않았지만, 접지된 coplanar waveguide에서는 상당히 많은 고차 모드가 발생되며, 특히, 첫 번째 고차 모드가 기본 모드에 매우 근접해 았었다 이와 같이, 기본 모드와 고차 모드가 매우 근접하여 있는 경우 또는 고차 모드가 매우 많이 발생되는 평변형 전송선로의 해석에 본 연구에서 해석 방볍이 효과적으로 적용될 수 있다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권6호
• /
• pp.562-568
• /
• 2013

This paper presents a design of a wireless power transfer system based on magnetic resonant coupling technology with in-band wireless communication. To increase the transmission distance and compensate for the change in the effective capacitance due to the varying distance, the proposed system used a loop antenna with a selectable capacitor array. Because the increased transmission distance enables multiple charging, we added a communication protocol operated at the same frequency band to manage a network and control power circuits. In order to achieve the efficient bandwidth in both power transfer mode and communication mode, the S-parameters of the loop antennas are adjusted by switching a series resistor. Our test results showed that the loop antenna achieved a high Q factor in power transfer mode and enough passband in communication mode.

• 조명전기설비학회논문지
• /
• 제26권7호
• /
• pp.45-51
• /
• 2012

In this paper, the wireless power transfer system using the magnetic resonance was designed and the effect of resonant coil radius and load resistance to this system was analyzed by the circuit analysis method. As a result, the calculated transmitted-power is similar to measured one, and the coil size has a small effect to the coupling coefficients in the resonant frequency band. In addition, the fact that the calculated transmitted-power according to the source frequency is similar to measured one confirms that the circuit analysis methode in this paper is valid. The input side transmission efficiency ${\eta}_i$ including only the loss in the power transfer circuit is almost 90[%] with the large coil in the 10[cm] transfer distance, and 65[%] with the small coil in 1[cm]. The source side transmission efficiency ${\eta}_s$ is 30~40[%] at both coil when load resistance below 4.7[${\Omega}$] has been connected. Considering that the maximum ${\eta}_s$ is 50[%], this is valid in the practical applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.13-14
• /
• 2011

The power conversion converter for driving the wireless power transfer system is can be into the two part of the DC power conversion rectifier and the high frequency dc-ac power conversion inverter. In this paper, The operating characteristics of the Class-${\Phi}_2$ resonant inverter have been investigated through by simulation and by experiment. It can be switched at a high frequency without the switching losses and the harmonics are reduced effectively due to the input LC filter. Its switching frequency is 1MHz and the input voltage is 96V which is the output voltage of LLC resonant converter. And its output peak voltage is 170V. The resonant inverter module operated at the commercial power source of 220V was built. And also the electromagnetic coupled resonance coils were designed for wireless power transfer with a 1MHz operating frequency. As a experimental result, the wireless power transmission was confirmed and it is varified the validity of the experiment.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.747-750
• /
• 2019

웨어러블 디바이스는 일상생활에서 실질적으로 필수적이며 사용자들에게 편리하게 이용되고 건강관리와 의학 분야 등에 활용되고 있다. 전력분야에서 전원 배터리의 사용시간의 한계를 극복하고 효율적인 충전방법에 관한 많은 연구가 진행되고 있다. 무선전력전송은 전선을 사용하지 않고 무선으로 전기장을 부하에 전력을 전달하는 기술이다. 이 전송기술은 저 전력의 스마트폰에서부터 고 전력을 사용하는 철도 충전시스템까지 응용분야가 다양하다. 충전방식은 유도방법과 자기공진방법의 2 종류로 나누는데 자기공진주파수는 13.45 Mhz를 사용하였다. 본 연구에서는 전송효율을 측정 비교하기 위하여 2 종류의 하드웨어를 구현한 후 비교하는데 있다.

• 천문학회지
• /
• 제20권1호
• /
• pp.27-47
• /
• 1987

In the present study a two-mode, separately concurring resonant cavity model is proposed for theoretical interpretation of the 3 minute umbral oscillation. The proposed model has been investigated by calculating the transmission coefficients of the waves propagating through the umbral photosphere (photospheric weak-field cavity) and chromosphere (chromospheric strong-field cavity) into the corona, for 3 different umbral model atmospheres by Staude (1982), Beebe et al. (1982) and Avrett (1981). In computing the transmission coefficients we made use of multi-layer approximation by representing the umbra] atmosphere by a number of separate layers with (1) temperature varying linearly with depth and (2) temperature constant within each layer. The medium is assumed to be compressible, non-viscous, perfectly conducting under gravity. The computed resonant periods, transmission spectra, phase spectra, and kinetic energy density of the waves associated with the oscillations are presented in comparison with the observations and their model dependent characteristics are discussed.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권1호
• /
• pp.22-26
• /
• 2005

This paper proposes the calculation method of magnetic coupling coefficient of the contactless energy transmission system by 3D finite element method with a variation of the secondary core positions. The primary, secondary self and leakage inductances and the capacitances of a resonant circuit are calculated by the finite element analysis results. From these values, the magnetic coupling coefficients are obtained. The secondary voltages and currents according to the secondary core positions are calculated by using the resonant circuit and compared.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.638-641
• /
• 2001

Connectorless power transmission and supply are the power transfer device revealed by resonant inverter or transformer using inductant device. Recently, on power supply have been going on frequently, so several power supply circuit forms are announced. But Compared with the circuit of previous paper, instead of the circuit composed of a simple sylinder Ferrit, I was manufacture in a sylinder that It was a double overlab to a sylinder and I was followed a double flux in inner flux path. Above all, for practicalization, supply circuit operation character analysis and development of controller should be preceded. According to this paper, power transmission and supply analyze characters and design control circuit like the analysis of general resonant inverter for power transmission. They compose the circuit to get sinusoid wave output voltage using pulse width modulation control mode. For Supply, output wave form through power track and power pick-up of magnetic inductance includes ripper component. So I intend to design the controller including filter and regulator, compare analyze theoretical result with real measurement value and then show you their practicality