• 한국전기전자재료학회논문지
• /
• 제11권11호
• /
• pp.975-983
• /
• 1998

A duplexer filter operating at 1.9 GHz band for personal communication system is designed and fabricated using $lambada$/4 TEM mode dielectric resonator. The transmitting band pass filter is designed in the type of the elliptic function band rejection filter by 3 dielectric resonators with 5 additional capacitors and 3 inductors. The receiving band pass filter is designed by 3 dielectric resonators with 5 additional capacitors which give additional series resonance. The parameters which are evaluated by design theory are practically applied to the duplexer filter construction and the simulation.

• 한국세라믹학회지
• /
• 제27권1호
• /
• pp.74-78
• /
• 1990

In this study, to develope the ultrasonic transducer element, the extrusion method which is the processing technique of the piezoelectric composite materials is introduced, the connectivity of the piezoelectric composite materials is the 1-3 type, and we study the properties of the materials. The electromechanical coupling factor(kt) of the materials is above 0.6, the resonance property(fr) is the thickness mode in the frequency range of 0.5 to 2 [MHz] and the acoustic impedance(Zac) is about 5 to 7 [Maryl]. From these results, it is known that the piezoelectric composite materials manufactured byt he extrusion method will be able to develope the ultrasonic transducer elements.

• Journal of electromagnetic engineering and science
• /
• 제3권1호
• /
• pp.23-28
• /
• 2003

In this paper, a triple-band planar antenna is proposed for the application to miniaturized automobile safety devices operating at X band(10.5 ㎓), K band(24.15 ㎓), and Ka band(34.3 ㎓). The frequency ratio between the resonant frequencies of this antenna can be adjusted from 1.99 to 2.23 for both X band and K band by varying its slit length. Parasitic elements are added on the modified slot loaded antenna to obtain the third resonance. From numerical as well as experimental results, it has been confirmed that this type of antenna is appropriate for planar multi-band antenna systems.

• Journal of electromagnetic engineering and science
• /
• 제10권2호
• /
• pp.67-72
• /
• 2010

A new type of monopole antenna whit broadband characteristics is presented in this article. To reduce the size of the antenna, its upper part is folded. By separating the current flow, the resonance in the shorter part is in the higher band; and the longer part resonates in the lower band. This gives the broadband characteristics of the antenna. Slots on the corner using an oblique line improve the impedance matching and bandwidth. The measurement results show that the bandwidth operates from 0.848~0.992 GHz and 1.744~2.528 GHz, and the radiation patterns are in an omni-directional shape.

• 한국소음진동공학회논문집
• /
• 제24권2호
• /
• pp.87-92
• /
• 2014

이 논문에서는 기존 외팔보 빔 형상을 가진 진동 에너지 하베스터의 작동 주파수 범위를 공진 주파수 이후로 확장하기 위해 새로운 형태의 진동 에너지 하베스터가 제시되었다. 압전 재료를 사용한 기존 외팔보 빔 형상의 진동 에너지 하베스터에 레버형 반공진 시스템에서 발생하는 극점-영점 상쇄 기법을 적용하여 작동 주파수 영역을 확장하였다. 간단한 이론적 해석 및 실험을 통해 제안된 광역 압전 진동 에너지 하베스터의 실현 가능성을 검증하였다.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.499-507
• /
• 2016

Medical imaging techniques such as Magnetic Resonance Imaging (MRI), Computed Tomography (CT) and Ultrasound (US) produce a large amount of digital medical images. Hence, compression of digital images becomes essential and is very much desired in medical applications to solve both storage and transmission problems. But at the same time, an efficient image compression scheme that reduces the size of medical images without sacrificing diagnostic information is required. This paper proposes a novel threshold-based medical image compression algorithm to reduce the size of the medical image without degradation in the diagnostic information. This algorithm discusses a novel type of thresholding to maximize Compression Ratio (CR) without sacrificing diagnostic information. The compression algorithm is designed to get image with high optimum compression efficiency and also with high fidelity, especially for Peak Signal to Noise Ratio (PSNR) greater than or equal to 36 dB. This value of PSNR is chosen because it has been suggested by previous researchers that medical images, if have PSNR from 30 dB to 50 dB, will retain diagnostic information. The compression algorithm utilizes one-level wavelet decomposition with threshold-based coefficient selection.

• Journal of Microbiology and Biotechnology
• /
• 제17권1호
• /
• pp.176-179
• /
• 2007

An electron paramagnetic resonance (EPR) signal characteristic of the 5,5'-dimethyl-l-pyrroline-N-oxide (DMPO)-OH spin adduct, which is formed from the reaction of DMPO with superoxide radicals generated by xanthine oxidasemediated reaction, was significantly reduced by the cadaverine or Escherichia coli Mn-containing superoxide dismutase (MnSOD). Likewise, cytochrome c reduction by superoxide was inhibited by cadaverine, and the inhibition level increased in proportion to the level of cadaverine. The cadA mutant of Vibrio vulnificus, which does not produce cadaverine because of the lack of lysine decarboxylase, exhibits less tolerance to superoxide stress in comparison with wild type. The results indicate that cadaverine scavenges superoxide radicals, and protects cells from oxidative stress.

• The Korean Journal of Pain
• /
• 제21권3호
• /
• pp.244-247
• /
• 2008

After a traumatic brachial plexus injury, 80% of patients develop severe pain in the deafferentated arm. This type of pain is considered very resistant to many forms of therapy. When we plan treatments for the patient who suffer from a pain from traumatic brachial plexus injury, clarifying the location of injured nerve is very important. EMG (electromyography), NCV (nerve conduction study), MRI (magnetic resonance imaging) and CT (computed tomography) myelography are recommended diagnostic method for this purpose. Here, we presented a patient who was suspected to have both preganglionic and postganglionic brachial plexus lesion by EMG and NCV study, he showed favorable response after spinal cord stimulation.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.122-133
• /
• 1998

This paper presents the static analysis, the modal analysis and the forced vibration analysis on engine structures to find out the structure-borne noise sources by finite element method. The deformation of engine structures under the maximum combu- stion gas force was calculated through the static analysis, and the resonance possibilities were predicted by the modal analysis which ascertains mode shapes and the corresponding frequencies of engine global and its major noise sources in engine surfaces were investigated with the forced vibration analysis by means of finding the transfer mobilities on engine surfaces due to the piston impact and the velocity levels due to the combustion in consideration of oil film stiffness and damping coefficients. Finally, the direction of engine structure-borne noise reduction can be estabilished by the above-mentioned analysis procedure and the reduction effect of cost on proto-type engine build-up is expected.

• Journal of Biosystems Engineering
• /
• 제24권3호
• /
• pp.253-258
• /
• 1999

This study was conducted to develop an automatic egg inspection system for detecting creaked eggs based on acoustic impulse response. This system includes a sound generator, a sound sensor with signal conditioner, and a computer. The sound generator that hit the sharp of the dull edges of an egg was constructed with a ceramic ball pendulum attached to a rotary type solenoid. The signal conditioner included a pre-amplifier and a digital signal processing (DSP) board. The parameters for distinguishing cracked and normal eggs were the area, the geometric centroid and the resonance frequency of power spectrum of the acoustic signal generated. An algorithm for on-line detection of the continuous transferring eggs was developed. The performance tests resulted with 91% success rate to separate cracked and normal eggs at the rate of 1 second per an egg.