• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.808-811
• /
• 2002

유도전동기 센서리스 벡터제어의 안정성에 대하여 많은 연구가 되어지고 있다. 그 결과 유도전동기의 고정자 저항, 회전자 저항, 시스템 파라미터의 변화에 대하여 센서리스 방법이 속도 센서가 있는 경우와 비교하여 불안정하게 되기 쉽다는 것이 분명하다. 본 논문에서 속도 지령 $\omega$$_{r}$일 스텝 변화에 대하여 관성 모멘트 J 를 변화하는 경우, 유도전동기 회전자 저항 R$_{r}$,을 변화하는 경우에 대해 살펴보고, 전동기의 파라미터, 시스템 파라미터의 변화에 영향을 받지 않는 제어 방법으로 전동기 전압, 전류, 전동기 정수에 의한 속도 Observer를 구성하여 속도 추정을 행하는 방법에 대하여 제안하고 타당성을 입증하고자 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.68-69
• /
• 2007

To make cost-effective solar cells, We have to use low cost material or make short process time or high temperature process. In solar cells, formation of emitter is basic and important technique according to build-up P-N junction. Diffusion process using spin-on dopants has all of this advantage. In this paper, We investigated n+ emitter formation spin-on dopants to apply crystalline silicon solar cells. We known variation of sheet resistance according to variation of temperature and single-crystalline and multi-crystalline silicon wafer using Honeywell P-8545 phosphorus spin-on dopants. We obtain uniformity of sheet resistance within 3~5% changing RPM of spin coater.

• 한국전기전자재료학회논문지
• /
• 제27권10호
• /
• pp.668-672
• /
• 2014

Carbon nanotubes(CNT) has chemical stability and great sensitivity characteristics. In particular, the gas sensor required characteristics such as rapid, selectivity and sensitivity sensor. Therefore, CNT are ideal materials to gas sensor. So, we fabricated the NOx gas sensors of MOS-FET type using the MWCNT (multi-walled carbon nanotube). The fabricated sensor was used to detect the NOx gas for the variation of $V_{gs}$(gate-source voltage) and electrode changed electrode spacing=30, 60, 90[${\mu}m$]. The gas sensor absorbed with the NOx gas molecules showed the decrease of resistance, and the sensitivity of sensor was increased by magnification of electrode spacing. Furthermore, when the voltage($V_{gs}$) was applied to the gas sensor, the decrease in resistance was increased. On the other hand, the sensor sensitivity for the injection of NOx gas was the highest value at the electrode spacing $90[{\mu}m]$. We also obtained the adsorption energy($U_a$) using the Arrhenius plots by the reduction of resistance due to the voltage variations. As a result, we obtained that the adsorption energy was increased with the increment of the applied voltages.

• 한국표면공학회지
• /
• 제25권5호
• /
• pp.235-252
• /
• 1992

(Ti, Al)N films were deposited on 304 stainless steel sheet by D.C. magnetron sputtering using Al target and Ti plate. The high temperature oxidation of (T, Al)N films with the variation of composition has been investigated. The chemical composition of (Ti, Al)N films with the variation of composition has been investigated. The chemical composition of (Ti, Al)N films was similar to the sputter area ratio of titanium to aluminum target by means of EDS and AES survey. The high temperature oxidation test of (Ti, Al)N showed that (Ti, Al)N has better high temperature resistance than TiN and TiC films. TiC films were cracked at 40$0^{\circ}C$ in air TiN films quickly were oxidised at $600^{\circ}C$, were spalled more than $700^{\circ}C$. But (Ti, Al)N films are relatively stable to$ 900^{\circ}C$. The good resistance to high temperature oxida-tion of (Ti, Al)N films are due to the formation of dense Al2O3 and TiO2 oxide layer. Especially, Al2O3 oxide layer is more important. The results obtained from this study show, it is believe that the (Ti, Al)N film by D.C. magnetron sputtering is promising for the use of high temperature and wear resistance mate-rials.

• 한국군사과학기술학회지
• /
• 제22권5호
• /
• pp.644-653
• /
• 2019

With the development of themal observatory device(TOD), thermal camouflage system has been applied not only to the weapon system but also to the combat suit for soldiers. In this paper, the characteristic of thermal radiation of human body depending on the clothing material properties was analyzed through numerical simulations. The bioheat equation with thermoregulatory model was solved to obtain the realistic surface temperature of human body and these results are combined with the emissivity of human skin and clothing in order to calculate the thermal signature from the human body. According to each thermal resistance of clothing, the optimal background radiance which makes contrast radiance intensity(CRI) be lowest is different. Also, the average CRI variation per thermal resistance change is about twice as much as the case of evaporative resistance change.

• 대한임상전기생리학회지
• /
• 제1권2호
• /
• pp.1-9
• /
• 2003

The purpose of this study was to analyze the effect given to the variable details which disturb the flow of blood in brain artery disease through Aerobic exercises. It chose the subjects of study : 5 persons in an exercise group and 5 persons in a non-exercise group. Peak brain blood velocity, mean velocity, and resistance & artery stricture ratio were measured with TCD, measure machine for brain artery blood flow. The conclusion of the study was as follows: 1. At pre-test of an exercises group and a non-exercise group, PBV, MBV, BRI, ASI of a non-exercise group were showed much lower in the variation of left common carotid artery(LCCA). 2. At post-test of an aerobic exercises group and a non-exercise group, PBV, MBV, BRI, ASI of a non-exercise group were showed just a little decrease ratio but were not significant different in the variation of left common carotid artery(LCCA). Viewing on the base of these result, continuing exercises promote the functional improvement of the heart blood system and were showed the positive variation of artery stricture ratio according to brain blood flow velocity, the pulse and resistance or blood velocity. Therefore programs for prescriptions through aerobic exercises must be developed in many ways.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.763-769
• /
• 2010

Thanks to the rapid advancement of computational power and development of numerical methods, Computational fluid dynamics techniques are being used widely for the prediction of ship resistance performance. In the present study, an automatic tool was developed to facilitate hull form modification, consequent mesh generation, and flow analysis for parametric study. It is a tedious job to go back and forth between geometry modification and mesh generation for every hull form variation. With the developed tool, users can make multiple hull form variation and their hull form performance prediction easily in a few simple steps. The verification of the developed tool was done by applying it to resistance performance parametric study of a generic POD propulsion cruise ship with different lengths of bow and stern. It is believed that the tool can be extended to more sophisticated hull form variation and help optimize the ship performance more efficiently.

• The Journal of Korean Physical Therapy
• /
• 제27권5호
• /
• pp.339-344
• /
• 2015

Purpose: The purpose of this study was to determine the effects of high and low resistance exercise using an elastic band on the strength and lymphedema of upper extremity in patients with breast cancer. Methods: Seventeen female patients with breast cancer related lymphedema were randomly allocated to the high (n=9) or low (n=8) resistance exercise group. Both groups participated in the elastic band exercise program three times a week for eight weeks. For the high resistance exercise group (HR), the resistance was gradually increased, while maintaining constant intensity of exercise for the low resistance exercise group (LR). Assessments made include the upper extremity muscle strength and lymphedema before and after training. Results: After the exercise program, the HR showed significantly improved shoulder flexion and elbow flexion strength variation compared to the LR (p<0.05). Upper arm edema rate was significantly decreased in HR (p<0.05), but the difference between the two groups was not significant. Conclusion: These findings suggest that the elastic band exercise helps improve the strength and lymphedema of upper extremity in patients with breast cancer. In particular, high resistance exercise is more effective in improving muscle strength and does not exacerbate lymphedema, rather may improve upper arm edema if it is applied with a low elastic bandage or compression sleeve.

• 해양환경안전학회지
• /
• 제22권2호
• /
• pp.246-252
• /
• 2016

본 연구에서는 연안의 해저면에 누적된 퇴적오염물을 효율적으로 수거할 수 있는 저속 쌍동형 정화선에 대한 선수선형의 개념설계에 대해 수행하였다. 선형설계는 선체건조가 용이하도록 단순화하였으며, 쌍동선 선형의 선수 Water line, 선수각 등의 변화에 따른 저항성능의 영향을 검토하였다. Ansys CFX를 이용한 수치시뮬레이션과 회류수조에서의 모형시험결과와의 비교/분석 등을 통하여 선수부 선형변화에 따른 저항성능과 자유표면 유동특성 사이의 관계를 고찰하였으며, 그 결과 선수재 위치와 어깨부 체적의 선수부 이동에 따른 파형개선으로 조파저항이 감소하는 등 저항성능의 향상을 확인하였다.

• 한국기계가공학회지
• /
• 제13권2호
• /
• pp.64-72
• /
• 2014

In the past, prism patterns have been linear triangular shapeswith a $90^{\circ}$ angle; however, new micro prism patterns having acute angles or obtuse angles have recently been the subject of demandin the display, lighting and photovoltaic industries. Micro-cutting experiments for micro-prism patterns having $60^{\circ}$, $90^{\circ}$, and $120^{\circ}$ angles on an electroplated Ni mold were performed and it was found in this study that the specific cutting resistance increased with a decrease in the tool angles (prism pattern angles). The cause of this variation had been thought to be the increase of the ploughing force due to tip rounding and the friction force due to the edge effect. However, the depth of the cut was large enough that it was possible to neglect these effects. Therefore, this study introduced the concept of representative stress of indentation. The measured stress was varied according to the indentation depth eventhoughthetestedspecimenswereidentical ; the varied stress was termed the representative stress. According to indentation theory, the strain that the Ni mold experienced increased with a decrease in the tool angle. Based on the stress-strain relationship, higher strain means higher stress and higher specific cutting resistance. Therefore, the specific cutting resistance was higher at smaller tool angles that had higher strain and stress.