• 한국전기전자재료학회논문지
• /
• 제29권6호
• /
• pp.337-341
• /
• 2016

In this study, $ Ni_{0.79}(Mn_{2.21-x}Cu_x)O_4$ (x=0~0.25) specimens were prepared by using a conventional mixed oxide method. All specimens were sintered in air at $1,200^{\circ}C$ for 12 h and cooled at a rate of $2^{\circ}C/min$ to $800^{\circ}C$, subsequently quenching to room temperature. We investigated the structural and electrical properties of $ Ni_{0.79}(Mn_{2.21-x}Cu_x)O_4$ specimens with variation of CuO amount for the application of NTC thermistors. As results of X-ray diffraction patterns, all specimens showed the formation of a complete solid solution with cubic spinel phase. The relationship between ln ${\rho}$ and the reciprocal of absolute temperature(1/T) for the NTC thermistors was shown linearity, which exhibited the typical NTC thermistor properties. With increasing the amount of CuO, resistivity at room temperature, B-value, and temperature coefficient resistance decreased.

• 센서학회지
• /
• 제15권4호
• /
• pp.277-283
• /
• 2006

We presented that fabrication process and characteristics of 3 axes flexible tactile sensor available for normal and shear force fabricated using Si micromachining and packaging technologies. The fabrication processes for 3 axes flexible tactile sensor were classified in the fabrication of sensor chips and their packaging on the flexible PCB. The variation rate of resistance was about 2.1 %/N and 0.5 %/N in applying normal and shear force, respectively. The flexibility of fabricated 3 axes flexible tactile sensor array was good enough to place on the finger-tip.

• 한국산학기술학회논문지
• /
• 제16권6호
• /
• pp.3731-3735
• /
• 2015

국내 최초로 개발된 동력분산형 고속열차인 HEMU-430X의 최고속도시험 중 실시한 차량 중량과 가속성능간의 상관관계에 대해 보고한다. 차량의 출력을 일정하게 유지한 채, 차량에 중량물 설치 및 제거를 통해 전체 차량의 중량을 2% 변화시킬 때의 차량 가속성능을 분석한 결과, 시험 최고속도인 413km/h속도 영역에서는 중량이 가벼울 때 최고속도시험에 유리한 것으로 나타났다. 시험 종료 후, 시험 당시 0.1초 단위로 측정된 속도 데이터를 바탕으로 속도별 차량의 추진에 사용된 소비전력을 측정한 결과 차량의 견인력과 공기저항력이 같아져서 더 이상 추진이 되지 않는 균형속도는 419km/h로 산출이 되었으며, 이는 중량이 가벼울 때 가속이 유리하다는 시험 결과와 일치한다. 이러한 분석 결과를 바탕으로 향후 HEMU-430X의 증속 시험에 활용할 계획이다.

• 한국가스학회지
• /
• 제24권4호
• /
• pp.10-17
• /
• 2020

신뢰도 기반 평가법은 천연가스배관의 기하학적 형상 변화, 기계적 특성, 하중변화 및 운영조건을 평가 인자로 사용하여 천연가스배관의 건전성 평가 관리의 신뢰도를 향상시킬 수 있다. 구조신뢰성 평가 시 배관의 파손확률은 외부하중에 대한 배관재료의 저항성과의 관계에 의해 평가된다. COMREL 프로그램을 사용하여 내압, 열응력 및 굽힘응력과 같은 복합응력에 의한 천연가스배관의 파손확률을 평가했다. 천연가스배관의 파손확률 평가 시 매설깊이는 1.5~30m, 차량바퀴하중은 2.5~20톤, 온도차는 45℃, 운전압력은 6.86MPa 그리고 토양밀도는 1.8kN/㎥를 사용하였다. 천연가스배관의 파손확률은 Von-Mises 응력 기준에 의해 복합응력 하의 최대허용응력 기준으로 평가하였다.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.19-26
• /
• 2020

Small nuclear reactor features higher power capacity, longer operation life than conventional power sources. It could be an ideal alternative of existing power source applied for special equipment for terrestrial or underwater missions. In this paper, a 25kWe heat pipe cooled reactor power source applied for multiple use is preliminary designed. Based on the design, a thermal-hydraulic analysis code for heat pipe cooled reactor is developed to analyze steady and transient performance of the designed nuclear reactor. For reactor design, UN fuel with 65% enrichment and potassium heat pipes are adopted in the reactor core. Tungsten and LiH are adopted as radiation shield on both sides of the reactor core. The reactor is controlled by 6 control drums with B₄C neutron absorbers. Thermoelectric generator (TEG) converts fission heat into electricity. Cooling water removes waste heat out of the reactor. The thermal-hydraulic characteristics of heat pipes are simulated using thermal resistance network method. Thermal parameters of steady and transient conditions, such as the temperature distribution of every key components are obtained. Then the postulated reactor accidents for heat pipe cooled reactor, including power variation, single heat pipe failure and cooling channel blockage, are analyzed and evaluated. Results show that all the designed parameters satisfy the safety requirements. This work could provide reference to the design and application of the heat pipe cooled nuclear power source.

• The Plant Pathology Journal
• /
• 제26권4호
• /
• pp.299-305
• /
• 2010

A half-sib family of two 4-year-old seedlings of Pinus $\times$ rigitaeda was inoculated with each of 20 Pinus thunbergii isolates of Fusarium circinatum (syn. Fusarium subglutinans f. sp. pini) from two pitch canker damaged sites in Jeju Island, South Korea. Initial symptoms of needle damages were visible on most of the seedlings at 18 days after inoculation. The 20 tested isolates were not significantly different in virulence, based on lesion lengths at the site of inoculation (P = 0.217). The most virulent isolate FT-7 showed the longest lesion length. Some seedlings began to die 46 days after inoculation. All seedlings were dead by 68 days after inoculation except two seedlings inoculated with each of isolates FS-2 and FS-13, respectively. Using the FT-7, 38-year-old 11 P. $\times$ rigitaeda trees, which were survived from a seed orchard severely damaged by pitch canker, were inoculated on branches in the seed orchard in Jeju Island to assess differences in susceptibility to pitch canker. The 11 trees differed significantly (P < 0.001) in susceptibility to F. circinatum based on average lesion lengths measured 56 days after inoculation. It is possible that induced resistance contributed to their capacity to limit lesion development. The susceptibility of natural selection P. $\times$ rigitaeda trees are more likely affected by interaction with F. circinatum rather than environmental conditions.

• 수산해양기술연구
• /
• 제17권2호
• /
• pp.105-108
• /
• 1981

우리나라 남부해안기후의 특성과 수온과의 관계를 알아보기 위하여 해안지방인 부산, 여수, 목포를 준표준 내륙지방으로 광주와 대구, 인근 해양의 가덕도, 소리도, 홍도의 수온을 선정하여 20년 간(1960~1979)의 관측자료로서 기온, 습도, 강수량을 조사 분석한 결과는 다음과 같다. 1) 해안지방(부산, 여수, 목포)은 해양의 영향으로 내륙지방(대구, 광주)보다 기온의 연교차가 적고 기온이 수온보다 높을 때는 내륙지방이 해안지방의 기온보다 높고, 수온이 기온보다 높을 때는 내륙지방이 해안지방보다 낮다. 2) 수온과 기온의 차에 따라서 내륙지방과 해안지방의 기온차가 결정되며(상관계수 0.9이상) 그 양적 예측도 상관관계식을 활용함으로써 가능하다고 생각된다. 3) 해안지방과 내륙지방의 습도의 차이도 기온의 경우와 비슷하게 나타났으나 목포는 지형적인 영향으로 다른 해안지방과 다르게 나타났다. 4) 수온과 기온의 차이에 따라서 해안지방과 내륙지방의 습도의 차이가 결정된다(상관계수 0.9이상, 목포제외), 그러므로 그 양적 해석도 가능하다. 5) 남해안지방의 강수량은 내륙지방과 그 차이가 뚜렷하게 나타나지는 않았다.

• 한국축산식품학회지
• /
• 제33권1호
• /
• pp.75-82
• /
• 2013

This study aimed to isolate lactic acid bacteria (LAB) from Kimchi and to identify suitable probiotic strain for application in fermented dairy product as a commercial starter culture. A total of 106 (LAB) strains were isolated from Kimchi collected from different regions in Korea and their phenotypic characteristics were assayed. Four isolates from MRS agar plates were selected and designated as DKL109, DKL119, DKL121 and DKL128. They were identified first by API 50 CHL kit and then 16S rRNA gene sequencing. DKL121 and DKL128 were identified as Lactobacillus paracasei and Lactobacillus casei, respectively. Other two isolates (DKL109 and DKL119) were identified as Lactobacillus plantarum. To estimate their applicability in dairy products, the characteristics including acid and bile tolerance, cold shock induced cryotolerance and enzymatic activities were determined. There was wide variation in ability of strains to acid tolerance, but no significant differences in bile tolerance, cold shock induced cryotolerance within selected strains. DKL119 and DKL121 showed the highest resistance to acid and bile and the highest ${\beta}$-galactosidase activity, respectively. When these two strains were used for yogurt preparation as a single starter culture, their viable cell counts reached to $1.0{\times}10^9CFU/mL$. Lactobacillus plantarum DKL119 showed faster acid development than commercial starter culture. Also storage trials at $10^{\circ}C$ showed that the viability of these strains was retained over 15 d. With these results, it was indicated that probiotics isolated from Kimchi can be used in yogurt manufacturing as a starter culture.

• 폴리머
• /
• 제33권2호
• /
• pp.175-182
• /
• 2009

Isophorone diisocyanate(IPDI)를 이소시아네이트 화합물로 사용하고, poly (tetramethylene glycol)(PTMG)과 polycarbonate diol(PCD)을 혼합한 폴리올을 사용하여 선형 수분산성 폴리우레탄(WPU)을 합성하고, 이들을 필름으로 캐스팅하여 폴리카보네이트(PC) 함량 변화에 따른 기계적 특성과 염색성, 내알칼리성 변화를 분석하였다. WPU 필름에 PC 성분의 함량이 증가함에 따라 인장강도는 증가하고 파단신도는 감소하였으며, 분산염료에 대한 겉보기 염착량이 감소하였지만, 내알칼리성은 영향이 없었다. 합성한 WPU 용액을 PET 섬유 인공피혁용 함침가공제로 사용한 결과, PTMG 만을 폴리올로 사용한 WPU 수지로 처리한 경우보다 인공괴혁의 마찰견뢰도, 일광견뢰도, 내세탁성 등 염색견뢰도를 크게 증가시킬 수 있었다.

• 대한금속재료학회지
• /
• 제47권8호
• /
• pp.500-507
• /
• 2009

Pb-free solder has recently been used in electronics in efforts to meet environmental regulations, and a number of Pb-free solder alloy choices beyond the near-eutectic SnAgCu solder are now available. With increased demand for thin and portable electronics, the high cost of alloys containing significant amounts of silver and their poor mechanical shock performance have spurred the development of low Ag SnAgCu solder, which provides improved mechanical performance at a reasonable cost. Although low Ag SnAgCu solder exhibits significantly higher fracture resistance under high-strain rates, little thermal fatigue data exist for this solder. Therefore, it is necessary to investigate thermal fatigue reliability of low Ag SnAgCu solder under variation of thermal stress in order to allow its implementation in electronic products with high reliability requirements. In this study, the reliability of Sn0.3Ag0.7Cu(SAC0307), a low Ag solder alloy, is discussed and compared with that of Sn3Ag0.5Cu(SAC305). Three sample types and six samples size are evaluated. Mechanical properties and microstructure of the solder joint are investigated under thermal shock cycles. It was observed that the mechanical strength of SAC0307 dropped slightly with thermal cycling relative to that of SAC305. This reveals that the failure mode of SAC0307 is different from that SAC305 under this critical condition.