DOI QR코드

DOI QR Code

The Analysis of Acceleration Performance Resulted by Weight Variation for HEMU-430X high-speed train the Korea's next-generation electric multiple unit train

차세대 동력분산형 고속열차(HEMU-430X)의 중량변화에 따른 가속능력 분석

  • Received : 2015.03.05
  • Accepted : 2015.06.11
  • Published : 2015.06.30

Abstract

This study reports the relationship between rollingstock weight and acceleration performance for HEMU-430X, the first electric multiple unit developed in Korea. While maintaining the consumed power, the total train weight was deliberately varied by 2%, by adding and removing weights, and the it was shown that the lighter train was found to have higher acceleration performance and hence better suited for maximum speed tests below the speed of 413km/h. According to the power consumption analysis based on the velocity data collected per 0.1 second, the balanced speed, when the traction force and air resistance become equal, was determined to be 419km/h for HEMU-430X, which is in agreement with tested result. It is expected that the analyses in this study will be utilized for the speed tests in the future.

국내 최초로 개발된 동력분산형 고속열차인 HEMU-430X의 최고속도시험 중 실시한 차량 중량과 가속성능간의 상관관계에 대해 보고한다. 차량의 출력을 일정하게 유지한 채, 차량에 중량물 설치 및 제거를 통해 전체 차량의 중량을 2% 변화시킬 때의 차량 가속성능을 분석한 결과, 시험 최고속도인 413km/h속도 영역에서는 중량이 가벼울 때 최고속도시험에 유리한 것으로 나타났다. 시험 종료 후, 시험 당시 0.1초 단위로 측정된 속도 데이터를 바탕으로 속도별 차량의 추진에 사용된 소비전력을 측정한 결과 차량의 견인력과 공기저항력이 같아져서 더 이상 추진이 되지 않는 균형속도는 419km/h로 산출이 되었으며, 이는 중량이 가벼울 때 가속이 유리하다는 시험 결과와 일치한다. 이러한 분석 결과를 바탕으로 향후 HEMU-430X의 증속 시험에 활용할 계획이다.

Keywords

References

  1. C. Jeon, Y. Kim, S. Kim, S. Kim, S. Choi and T. Park, "A Study on Tail Vibration Reduction xt Generation high-speed trainfor the Next Generation High Speed EMU", Journal of the Korean Society for Railway, vol. 15, no. 6, pp. 543-549. 2012 DOI: http://dx.doi.org/10.7782/JKSR.2012.15.6.543
  2. S. Ryu, S. Kim, J. Hong, D. Song and Y. Guo, "Safety Evaluation of the Dynamic Behavior of HEMU-430X using the Accelerometers of UIC 518 OR, Journal of the Korean Society for Railway", vol. 23, no. 3, pp. 310-317, 2014
  3. C. S. Park, S. Choi, I. Han, S. Kim, T. Lee and K. Kim, Analysis for Main Properties of basic characteristic of HEMU-400X, Proc. The Korean Society for Railway, 2009
  4. H. Kwon, S. Kim and H. K. Oh, Assesment of the Running Resistance of a High-speed Train Using a Coasting Test, Journal of the Korean Society for Railway, vol. 17, no. 3, pp. 165-170, 2014. DOI: http://dx.doi.org/10.7782/JKSR.2014.17.3.165
  5. T. Lee, C. Park, S. Choi, K. Kim, A study of the train performance simulation for Korean next Generation high-speed train, Proc. World Congress on Railway Research, 2011
  6. S. Kim, S. Kim, C. Park, H. Oh, and C. Jeon, Development of Korean Next-Generation High-speed Railway, Japan-Korea Joint Symposium on Dynamics & Control, 2013
  7. D. Choi, C. Jeon, H. Cho, S. Kim, The relationship between train weight and acceleration for the Korea's next-generation electric multiple unit train, Korea Railway Research Conference, pp. 470-474, 2013
  8. Y. Ku, J. Rho, S. Yun, M. Kwak, K. Kim, H. Kwon and D. Lee, Optimal cross-sectional area distribution of a high-speed train nose to minimize the tunnel micro-pressure wave, Struct. Multidisc. Optim. vol. 42, no. 6, pp. 965-976, 2010. DOI: http://dx.doi.org/10.1007/s00158-010-0550-6
  9. H. Cho, S. Kim, C. Jeon, T. Lee, S and Kim, Analysis of Power Consumption for Increasing Speed of HEMU-430X, The Korean Institute of Electrical Engineers, pp. 295-296, 2014
  10. Mott Rochard and F. Schmid, A Review of Methods to Measure and Calculate Train Resistances, Proc. Instn. Mech. Engrs, vol. 214, pp. 185-199, 2000. DOI: http://dx.doi.org/10.1243/0954409001531306

Cited by

  1. Field Test of High-Speed Transponder System for Rail Transport vol.65, pp.1, 2016, https://doi.org/10.5370/KIEE.2016.65.1.208