• Korean Chemical Engineering Research
• /
• v.53 no.1
• /
• pp.46-52
• /
• 2015

A leaching kinetics was conducted for the purpose of recovery of praseodymium in sulfuric acid ($H_2SO_4$) from REE slag concentrated by the smelting reduction process in an arc furnace as a reactant. The concentration of $H_2SO_4$ was fixed at an excess ratio under the condition of slurry density of 1.500 g slag/L, 0.3 mol $H_2SO_4$, and the effect of temperatures was investigated under the condition of 30 to $80^{\circ}C$. As a result, praseodymium oxide ($Pr_6O_{11}$) existing in the slag was completely converted into praseodymium sulfate ($Pr_2(SO_4)_3{\cdot}8H_2O$) after the leaching of 5 h. On the basis of the shrinking core model with a shape of sphere, the first leaching reaction was determined by chemical reaction mechanism. Generally, the solubility of pure REEs decreases with the increase of leaching temperatures in sulfuric acid, but REE slag was oppositely increased with increasing temperatures. It occurs because the ash layer included in the slag is affected as a resistance against the leaching. By using the Arrhenius expression, the apparent activation energy of the first chemical reaction was determined to be $9.195kJmol^{-1}$. In the second stage, the leaching rate is determined by the ash layer diffusion mechanism. The apparent activation energy of the second ash layer diffusion was determined to be $19.106kJmol^{-1}$. These relative low activation energy values were obtained by the existence of unreacted ash layer in the REE slag.

• Elastomers and Composites
• /
• v.55 no.3
• /
• pp.167-175
• /
• 2020

Various studies have been conducted to improve silica dispersion of silica filled tire tread compounds; among them, silica wet masterbatch (WMB) technology is known to be suitable for manufacturing silica filled compounds that have high silica content and high dispersibility. Till now, the WMB study is focused on the natural rubber (NR) or emulsion styrene-butadiene rubber (ESBR) that does not have a silica-affinity functional group, and a study of NR or ESBR having a silica-affinity functional group is still not well known. Unlike the dry masterbatch technology, the WMB technology can solve the problems associated with the high Mooney viscosity when applied to silica-friendly rubber. However, a coagulant suitable for each functional group has not yet been determined. Therefore, in this study, different coagulant applied silica WMB was prepared by applying calcium chloride, sulfuric acid, acetic acid, and propionic acid by using a carboxyl group functionalized reversible addition fragmentation chain transfer ESBR. The evaluation of the WMB compounds revealed that the calcium chloride added WMB compound showed excellent silica dispersion, abrasion resistance, and rolling resistance.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.5
• /
• pp.145-153
• /
• 2012

To obtain basic information for evaluating resistance of soil acidification for growth, net photosynthesis, $N_2$ fixation rate and nutrient status of Alnus firma and Alnus hirsuta seedlings grown in brown forest soil acidified with $H_2SO_4$ or $HNO_3$ solution were investigated (control (pH=5.9), LN (pH=5.0; Low levels of Nitric acid), HN (pH=4.0; High levels of Nitric acid), LS (pH=5.0; Low levels of Sulfuric acid), and HS (pH=4.0; High levels of Sulfuric acid)). The shoot dry weight of Alnus firma and Alnus hirsuta and the root dry weight of Alnus hirsuta seedlings grown in the HN, LS and HS were significantly less than that of the seedlings grown in the control. The Chlorophyll a/b ratio in leaves of Alnus firma at LN, LS and HS was significantly lower than that of control. The concentration of N in leaves of Alnus hirsuta at HS was significantly higher than that of control. The net photosynthetic rate of Alnus firma and Alnus hirsuta seedlings at LN and HN was higher than that of control. Based on the results, we concluded that the negative effects of soil acidification due to sulfate deposition are greater than those of soil acidification due to nitrate deposition on growth, net photosynthesis and $N_2$ fixation rate of Alnus firma more than Alnus hirsuta.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.421-424
• /
• 2008

The purpose of this experimental research is to investigate the influence of cement types on the resistance to acid and sulfate. For this purpose, concrete specimens with three types of cement such as ordinary portland cement(OPC), binary blended cement(BBC), and ternary blended cement(TBC) were made for water-binder(W/B) ratios of 32% and 43%, and then according to JSTM C 7401, the appearance change and ratio of mass change of them were estimated through the immersion tests by 5% sulfuric acid, 10% sodium sulfate, and 10% magnesium sulfate solution, respectively. It was observed from the test result that the resistance against acid and sulfate increased with decreasing W/B ratio and those of BBC and TBC concretes were better than the case of OPC concrete from immersion tests of 91 days.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.27-32
• /
• 2002

In this research influences of type and concentration of alkali activator and curing condition on the hydration, and properties of alkali activated blast furnace slag(AAS) concrete were investigated. Sodium carbonate and sulfate were used as alkali activators and their concentration were 4~10 weight percent with Na$_2$O equivalent to binder. The curing conditions were standard curing using 23$^{\circ}C$ water and activated curing chamber at $65^{\circ}C$. Results show that in case of sodium carbonate addition high early strengths were gained by activation of early hydration, but later strength gained was slight. On the other side sodium sulfate strengths were continuously increased with adding amount and ages. Steam curing activated early hydration so that early strengths were improved but later strengths were similar to standard curing. The strength reduction of AAS mortar with sodium sulfate was less than OPC mortar in 5% sulfuric acid solution so that AAS concrete can be useful for acid-resistance concrete.

• Transactions of Materials Processing
• /
• v.12 no.4
• /
• pp.388-393
• /
• 2003

Electrolytic polishing is the anodic dissolution process in the transpassive state. It removes non-metallic inclusions and improves mechanical and corrosion resistance of stainless steel. Electrolytic polishing is normally used to remove a very thin layer of material from the surface of a metal object. An electrolyte of phosphoric acid 50% in vol., sulfuric acid 20% in vol. and distilled water 30% in vol. has been used in this study. In the low current density region, there can be found plateau region and material removal process and leveling process occur successively. In this study, an electrochemical polishing process using pulse current is adopted as a new electrochemical polishing process. In electrochemical machining processes, it has been found that pulse electrochemical processes provide an attractive alternative to the electrochemical processes using continuous current. Hence, this study will discuss the electrochemical polishing processes in low current density region and pulse electrochemical polishing.

• Journal of the Korean Chemical Society
• /
• v.40 no.1
• /
• pp.37-43
• /
• 1996

The electrochemical impedance spectra of polyaniline film coated on tungsten electrodes by cyclic voltammetry have been measured in 0.1 M aqueous sulfuric acid solution. An electrochemical cell composed of large redox capacitance and low resistance of PANI-film in series was in agreement with the conductive behavior reported at these potentials. When the PANI was coated on bare tungsten, the electrolytic resistance was only observed. However, on the oxidized tungsten instead of bare tungsten, the resistance of tungsten oxide and the contact resistance between PANI and tungsten oxide were additionally observed. Equivalent electrical circuits have been deduced from the impedance data. It was therfore possible to obtain the parameters of the ionic mass transport within the film.

• Journal of Korean Society for Atmospheric Environment
• /
• v.7 no.3
• /
• pp.208-218
• /
• 1991

To compare the resistance of landscape trees by acid rain, simulated acid rain was treated on the seeds of 6 coniferous species (Pinus densiflora, Pinus thunbergii, Pinus koraiensis, Taxus cuspidata, Cedrus deodara, Thuja occidentalis) and 6 broad-leafed species (Ligustrum obtusifolium, Acer Buergerianum, Acer Ginnala, Styrax obassia, Cornus Kousa, Magnolia obovata). The experimental design of randomized block arrangement with three replications was implemented in the experimental field of Yesan National Agri-Tech Junior College. The seeds of 12 tree species were planted on the nursery soil in the early spring of 1991. The regime of artificial acid rain, in terms of spray frequency per monthly and spray amount at year records. Simulated acid rain (pH 2.0, pH 4.0, pH 5.6 as control) containing sulfuric and nitric acid in the ratio of 3:2 (chemical equivalant basis) diluted ground water, were treated on the experimental plants under condition of cutting off the natural precipitation with vinyl tunnel, during the growing season (April 8 to August 31) in 1991. Seedling establishment, seedling growth and nutrient contents in needles and leaves were measured and compared among the treatment. The results were summerized as follows; 1. In general, coniferous species were more resistant than broad-leafed species in the resistant comparisons of landscape trees by simulated acid rain. But there were resistant tree species to acid rain among the broad-leafed species. 2. Among 6 coniferous species used in this experiment, Pinus densiflora, Pinus koraiensis, Taxus cuspidata, Cedrus deodara and Pinus thunbergii revealed the resistant tree species to acid rain. But Thuja occidentalis was very susceptible to acid rain, because of no germination in pH 2.0 treatment plot of acid rain. 3. Among 6 broad-leafed species used in this study, Magnolia obovata, Styrax obassia and Ligustrum obtusifolium showed relative resistant tree species to acid rain. But Acer Buergerianum, Acer Ginnala and Cornus Kousa were very susceptible to acid rain, because of no germination in pH 2.0 plot of acid rain treatment.

• Corrosion Science and Technology
• /
• v.14 no.3
• /
• pp.140-146
• /
• 2015

The commercialization of aluminum had been delayed than other metals because of its high oxygen affinity. Anodizing is a process in which oxide film is formed on the surface of a valve metal in an electrolyte solution by anodic oxidation reaction. Aluminum has thin oxide film on surface but the oxide film is inhomogeneous having a thickness only in the range of several nanometers. Anodizing process increases the thickness of the oxide film significantly. In this study, porous type oxide film was produced on the surface of aluminum in sulfuric acid as a function of electrolyte temperature, and the optimum condition were determined for anodizing film to exhibit excellent cavitation resistance in seawater environment. The result revealed that the oxide film formed at $10^{\circ}C$ represented the highest cavitation resistance, while the oxide film formed at $15^{\circ}C$ showed the lowest resistance to cavitation in spite of its high hardness.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.903-906
• /
• 2008

To analyze the growth of SOB (Thiobacillus novellus) and biochemical corrosion of concrete, simulation test method and device were developed. And two types of simulation tests were conducted according to a transplant method and a concentration of H2SO4. As a result, the SOB growth in distinct manners and antibiosis of specimen were observed. In the case of the specimens indirectly transplanted with SOB through culture solution submersion at a hydrogen sulfide level of 120ppm, the rapid activation of SOB and the resulting sulfuric acid production were observed. However, SOB were shown to grow rapidly and then die out in a relative short period of time. Meanwhile, in the case of the specimens directly transplanted with SOB at a hydrogen sulfide level of 50ppm, the long-term growth of SOB was possible, but the production of sulfuric acid by SOB did not progress. In the case of the antibiotic metal-mixed specimens, SOB with destroyed cell membranes and internal organizations were observed.