• 제목/요약/키워드: Resistance increasing factor

검색결과 209건 처리시간 0.026초

스크랩 장입 비율에 따른 다이캐스팅용 알루미늄 합금의 부식 특성 (Corrosion Characteristics of Aluminum Die Casting Alloys with Different Scrap Charge Rate)

  • 김준호;이승효
    • 한국표면공학회지
    • /
    • 제53권6호
    • /
    • pp.322-329
    • /
    • 2020
  • The utilization of aluminum scrap is a subject of great importance in terms of reducing energy consumption and environmental protection. However, aluminum scrap contains impurities, which can degrade the properties of aluminum alloy, especially corrosion resistance. This study examines the effect of scrap charge rate of aluminum alloys about microstructures and corrosion characteristics. According to the metallographic examinations, Mg2Si tended to become coarser and its uniformity was decreased by increasing aluminum scrap charge rate. The immersion test exhibited corrosion progressed through the eutectic areas due to micro-galvanic interactions. Electrochemical measurements revealed that excess aluminum scrap could reduce the intergranular corrosion resistance of aluminum alloys. Results showed that the scrap charge rate is important factor in the design of corrosion resistance of aluminum die casting alloys.

오스테나이트계 스테인리스강 모재 및 용접부의 인장특성과 내식성에 관한 연구 (A study on the tensile property and corrosion resistance of austenitic stainless base and weld metal)

  • 정호신;김조권;엄동석
    • Journal of Welding and Joining
    • /
    • 제14권4호
    • /
    • pp.71-78
    • /
    • 1996
  • The effect of chemical composition on mechanical properry and corrosion resistance of austenitic stainless steel was investigated. The main results obtained were as follows : 1. There was a linear relationship between the tensile strength of stainless steel and the $Cr_{eq}/Ni_{eq}$. The larger the $Cr_{eq}/Ni_{eq}$ was the higher the tensile strength of stainless steel. 2. There was a good correlationship between $Cr_{eq}/Ni_{eq}$ and intergranular, gerneral corrsion rate. 3. Intergranular corrosion rate decreased linearly with increasing Cr content. 4. General corrosion rate decreased linearly with increasing Ni content. 5. Logarithm corrosion rate of intergranular and general corrosion has a linear relationship with all of the factor of $Cr_{eq}/Ni_{eq}$, Cr and Ni content.

  • PDF

딥러닝 알고리즘 기반 탄산화 진행 예측에서 활성화 함수 적용에 관한 기초적 연구 (A Fundamental Study on the Effect of Activation Function in Predicting Carbonation Progress Using Deep Learning Algorithm)

  • 정도현;이한승
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2019년도 추계 학술논문 발표대회
    • /
    • pp.60-61
    • /
    • 2019
  • Concrete carbonation is one of the factors that reduce the durability of concrete. In modern times, due to industrialization, the carbon dioxide concentration in the atmosphere is increasing, and the impact of carbonation is increasing. So, it is important to understand the carbonation resistance according to the concrete compounding to secure the concrete durability life. In this study, we want to predict the concrete carbonation velocity coefficient, which is an indicator of the carbonation resistance of concrete, through the deep learning algorithm, and to find the activation function suitable for the prediction of carbonation rate coefficient as a process to determine the learning accuracy through the deep learning algorithm. In the scope of this study, using the ReLU function showed better accuracy than using other activation functions.

  • PDF

고효율, 저가화 실리콘태양전지를 위한 Ni/Cu/Ag 금속전극의 특성 연구 (Investigation of the Ni/Cu metallization for high-efficiency, low cost crystlline silicon solar cells)

  • 이지훈;조경연;이수홍
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
    • /
    • pp.235-240
    • /
    • 2009
  • Crystlline silicon solar cells markets are increasing at rapid pace. now, crystlline silicon solar cells markets screen-printing solar cell is occupying. screen-printing solar cells manufacturing process are very quick, there is a strong point which is a low cost. but silicon and metal contact, uses Ag & Al pates. because of, high contact resistance, high series resistance and sintering inside process the electric conductivity decreases with 1/3. and In pastes ingredients uses Ag where $80{\sim}90%$ is metal of high cost. because of low cost solar cells descriptions is difficult. therefore BCSC(Buried Contact Solar Cell) is developed. and uses light-induced plating, ln-line galvanization developed equipments. Ni/Cu matel contact solar cells researches. in Germany Fraunhofer ISE. In order to manufacture high-efficiency solar cells, metal selections are important. metal materials get in metal resistance does small, to be electric conductivity does highly. efficiency must raise an increase with rise of the curve factor where the contact resistance of the silicon substrate and is caused by few with decrement of series resistance. Ni metal materials the price is cheap, Ti comes similar resistance. Cu and Ag has the electric conductivity which is similar. and Cu price is cheap. In this paper, Ni/Cu/Ag metal contact cell with screen printing manufactured, silicon metal contact comparison and analysis.

  • PDF

Effects of Ovariectomy on Insulin Resistance and β-Cell Function and Mass

  • Choi, Soo-Bong;Park, Chun-Hee;Jun, Dong-Wha;Jang, Jin-Sun;Park, Sun-Min
    • Preventive Nutrition and Food Science
    • /
    • 제9권4호
    • /
    • pp.367-373
    • /
    • 2004
  • The prevalence of type-2 diabetes increases remarkably in post-menopausal women, possibly because insulin secretion fails to compensate for the insulin resistance induced in various tissues by estrogen insufficiency. However, this has not been fully defined. Therefore, the present study investigated whether an ovariectomy (OVX) would increase insulin resistance and decrease the $\beta$-cell function and mass in female rats with and without a $90\%$ pancreatectomy (Px). Female rats aged 15 weeks were divided into four groups: 1) OVX + Px, 2) SOVX (sham operation of OVX) + Px, 3) OVX + SPx (sham operation of Px), and 4) SOVX + SPx, and given a $30\%$ fat diet for 8 weeks. At the end of the experimental period, the islet function and insulin resistance were determined using a hyperglycemic clamp and a euglycemic hyperinsulinemic clamp, respectively. The OVX only increased the body weight in the SPx rats, which was partially related to the food intake. Yet, the OVX did increase the peripheral insulin resistance, while the Px increased this resistance further. The OVX and Px both exacerbated the islet function, as measured by the insulin secretion pattern, while delaying and decreasing the first-phase insulin secretion. The OVX only decreased the proliferation of $\beta$-cells in the Px rats, while increasing apoptosis in both the Px and SPx rats. As a result, the OVX decreased the $\beta$-cell mass in the Px rats, but increased the mass in the SPx rats. In conclusion, an OVX was found to accelerate the development and progression of diabetes by increasing the insulin resistance and decreasing the $\beta$-cell mass. Therefore, menopause can be a risk factor for type-2 diabetes, mainly due to a deceased proliferation of $\beta$-cells.

사질지반에서 액상화 저항에 대한 선행전단응력의 영향 (Preshear Influence for Liquefaction Resistance in Sand)

  • 윤여원;김한범;김방식
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.315-322
    • /
    • 2003
  • Cyclic simple shear tests were performed to find out the effect of preshear on dynamic strength of the sandy soil. Tests were performed for the specimens with 40% and 60% of relative density, under three different effective vertical stress of 50, 100 and 200kPa. For 50 and 100kPa, preshear ratios 0.00, 0.08, 0.12 and 0.16 were given, respectively, For low and high relative densities, two different results are shown in dynamic tests. Under the dense conditions, the maximum shear stress ratio($\tau$$\_$cyc//$\sigma$$\_$vo/) and the cyclic shear stress ratio($\tau$$\_$cyc//$\sigma$$\_$vo/) causing a certain shear strain increase with augmenting preshear ratio(${\alpha}$). However, the maximum shear stress ratio and the cyclic shear stress ratio increase or decrease with increasing preshear ratio under the loose conditions. Correction factor(K$\_$${\alpha}$/) for preshear increases at an early stage and then decreases with increasing preshear ratio at loose condition and increase with increasing preshear ratio at dense condition. Correction factor (K$\_$${\alpha}$,Max/) for preshear increases with the increasing preshear ratio irrespective of relative density, and the value of has same behavior as K$\_$${\alpha}$/.

  • PDF

암(癌)의 면역치료(免疫治療)에 대(對)한 고찰(考察) (A literature study on oncological Immune therapy)

  • 박종학;손창규;조종관
    • 혜화의학회지
    • /
    • 제9권2호
    • /
    • pp.211-221
    • /
    • 2001
  • A literature study on oncological immune therapy was done, and the results were as follows. 1. Oncological immune therapy is classified as specific non specific therapy or active inactive therapy, and in tumor immune response, cellular immunity operates mainly, so activity of T lymphocytes and macrophages are closely related with growth, progress, metastasis and prospect of tumor. Recently, Immune therapies of gene which use cytokines and HLA-B7 are carrying out. 2. In oriental medicine, development of disease is closely related to up and down of healthy qi, so healthy qi operates as a immune factor and resistance factor. 3. On the base of theory "Increasing healthy qi reduces mass(養正則積自除)", strengthening body resistance is emphasized in cancer therapy. Also strengthening body resistance activates cellular immune response and promote killing tumor facility of T-cell. 4. In clinical view, using immune therapy after operation, radiation, and chemotheraphy is more effective than immune therapy itself, so it is expected that east-west cooperation will be effective in cancer therapy. 5. The study of oncological immunity is progressed on emphasizing T-cell and it is related to oriental medical theory "strengthening healthy qi to eliminate pathogen(扶定祛邪)" and advanced study is expected in future.

  • PDF

PRP4 Kinase Domain Loss Nullifies Drug Resistance and Epithelial-Mesenchymal Transition in Human Colorectal Carcinoma Cells

  • Ahmed, Muhammad Bilal;Islam, Salman Ul;Sonn, Jong Kyung;Lee, Young Sup
    • Molecules and Cells
    • /
    • 제43권7호
    • /
    • pp.662-670
    • /
    • 2020
  • We have investigated the involvement of the pre-mRNA processing factor 4B (PRP4) kinase domain in mediating drug resistance. HCT116 cells were treated with curcumin, and apoptosis was assessed based on flow cytometry and the generation of reactive oxygen species (ROS). Cells were then transfected with PRP4 or pre-mRNA-processing-splicing factor 8 (PRP8), and drug resistance was analyzed both in vitro and in vivo. Furthermore, we deleted the kinase domain in PRP4 using Gateway™ technology. Curcumin induced cell death through the production of ROS and decreased the activation of survival signals, but PRP4 overexpression reversed the curcumin-induced oxidative stress and apoptosis. PRP8 failed to reverse the curcumin-induced apoptosis in the HCT116 colon cancer cell line. In xenograft mouse model experiments, curcumin effectively reduced tumour size whereas PRP4 conferred resistance to curcumin, which was evident from increasing tumour size, while PRP8 failed to regulate the curcumin action. PRP4 overexpression altered the morphology, rearranged the actin cytoskeleton, triggered epithelial-mesenchymal transition (EMT), and decreased the invasiveness of HCT116 cells. The loss of E-cadherin, a hallmark of EMT, was observed in HCT116 cells overexpressing PRP4. Moreover, we observed that the EMT-inducing potential of PRP4 was aborted after the deletion of its kinase domain. Collectively, our investigations suggest that the PRP4 kinase domain is responsible for promoting drug resistance to curcumin by inducing EMT. Further evaluation of PRP4-induced inhibition of cell death and PRP4 kinase domain interactions with various other proteins might lead to the development of novel approaches for overcoming drug resistance in patients with colon cancer.

POCl3를 사용한 pn접합 소자에 관한 연구 (Study on the pn Junction Device Using the POCl3 Precursor)

  • 오데레사
    • 한국진공학회지
    • /
    • 제19권5호
    • /
    • pp.391-396
    • /
    • 2010
  • 실리콘 태양전지의 pn 접합 계면특성을 조사하기 위해서 p형 실리콘 기판 위에 전기로를 이용한 $POCl_3$ 공정을 통하여 n형의 불순물을 주입하여 pn 접합을 만들었다. n형 불순물의 확산되어 들어가는 공정시간이 길고 공정온도가 높을수록 면저항은 줄어들었다. n형 불순물의 주입이 많아질수록 pn 접합 계면에서의 전자친화도가 줄어들면서 면저항은 감소되었다. 면저항이 줄어든 이유는 pn 접합계면에서 전자홀쌍이 생성되면서 이동길이가 길어지고 재결합률이 감소하였기 때문이다. n형의 불순물 확산공정시간이 긴 태양전지 셀에서 F.F. 계수가 높게 나타났으며, 효율도 높게 나타났다.

CIP 도체 압축기술에 따른 구리도체 저항변화 (Variation of Electric Resistance under the CIP process of Strended Copper Conductors)

  • 정승;양훈철;최아름
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.1428-1429
    • /
    • 2011
  • This paper variation of stranded cable conductor with CIP(Cold Isostatic Press) technology. Conductor as cable material takes majority costs. Thus many experiments have been done on conductor compaction. The core technology is to maintain the resistance of circular stranded conductor after compaction process, while reducing the weight of conductor diameter, but by increasing filling factor. Testing by varying the compaction ratio using 300SQ conductor, conductor after CIP process shows lower resistance rather than conductor before CIP process.

  • PDF