• The Journal of Advanced Prosthodontics
• /
• 제13권4호
• /
• pp.237-245
• /
• 2021

PURPOSE. This study aimed to compare the microshear bond strength (µSBS) of dual-cure resin cement in CAD-CAM zirconia after different cleaning techniques. MATERIALS AND METHODS. Fifty discs of zirconia-based ceramic from Ivoclar Vivadent were embedded in acrylic resin. The discs were divided into five groups according to the cleaning methods used: Group 1: drying with spraying + sandblasting with Al₂O₃; Group 2: washed with water and dried with spraying + sandblasting with Al₂O₃;Group 3: washed with distilled water and dried with spraying + sandblasting with Al₂O₃ + zirconium oxide (Ivoclean); Group 4: washed with distilled water and dried with spraying + sandblasting with Al₂O₃ + potassium hydroxide (Zirclean); and Group 5: washed with distilled water and dried with spraying + sandblasting with Al₂O₃ + 1% NaClO. All of the groups were contaminated with artificial saliva for 1 minute and then cleaned. Statistical analyses were performed using ANOVA and Tukey's tests. RESULTS. There were statistically significant differences among all groups for µSBS (P < .05). The group treated with zirconium oxide (Group 3) showed the highest µSBS (18.75 ± 0.23 MPa). CONCLUSION. When applied to zirconia, the cleaning methods affected the bonding with resin cement differently.

• Restorative Dentistry and Endodontics
• /
• 제48권3호
• /
• pp.28.1-28.13
• /
• 2023

Objectives: This study aimed to investigate the effect of the application method of 2% chlorhexidine (CHX) and its influence on the adhesion of fiberglass posts cemented with a self-adhesive resin cement. Materials and Methods: Sixty human mandibular premolars were endodontically treated and divided into 5 groups (n = 12), according to the canal irrigant and its application method: 2 groups with conventional syringe irrigation (CSI)-2.5% sodium hypochlorite (NaOCl) (control) and 2% CHX- and 3 groups with 2% CHX irrigation/activation-by passive ultrasonic irrigation (PUI), Easy Clean file, and XP-Endo Finisher file. Two roots per group were evaluated for smear layer (SL) removal by scanning electron microscopy. For other roots, fiber posts were luted using a self-adhesive resin cement. The roots were sectioned into 6 slices for push-out bond strength (BS) (7/group) and nanoleakage (NL) (3/group). Data from SL removal were submitted to Kruskal-Wallis and Student-Newman-Keuls tests (α = 0.05). Data from BS and NL were evaluated by 2-way analysis of variance and Tukey's test (α = 0.05). Results: For SL removal and BS, the CHX irrigation/activation promoted better values than CSI with CHX (p < 0.05), but it was not significantly different from CSI with NaOCl (p > 0.05). For NL, the lowest values were obtained by the chlorhexidine irrigation/activation groups (p < 0.05). Conclusions: Active 2% CHX irrigation can be used to improve the post space cleaning and adhesion before fiber post cementation with self-adhesive resin cements.

• 대한치과교정학회지
• /
• 제30권1호
• /
• pp.83-89
• /
• 2000

레진 강화형 글래스 아이오노머 시멘트의 접착 강도를 알아보고, 타액 오염이 접착제의 종류에 따라 접착 강도에 어떠한 영향을 미치는지 관찰하여 봄으로써 임상적 효용성을 알아보기 위하여 본 연구를 시행하였다. 교정 치료를 목적으로 발거된 소구치에 교정용 복합 레진 접착제로 Ortho-One, 레진 강화형 글래스 아이오노머 시멘트로는 Fuji Ortho LC, Vitremer, Advance를 사용하여 통상적인 과정의 브라켓 접착을 하였으며, 타액 오염군은 타액 오염후에 건조 한 뒤 브라켓을 접착한 후 증류수에 침적하고 $37^{\circ}C$ 항온조에 24시간 보관하였다. 만능시험기로 인장 접착 강도를 측정하여 다음과 같은 결과를 얻었다. 1. 통상의 방법으로 브라켓을 부착한 경우 인장 접착 강도는 Ortho-One군에서는 $7.68\pm1.76$ 이었으며, Advance군에 서는 $7.87\pm2.80$, Fuji Ortho LC군에서는 $4.99\pm2.53$, Vitremer군에서 는 $2.80\pm0.88$ MPa 나타났다. 타액 오염시킨 경우 인장 접착 강도는 Ortho-One군에서 는 $4.12\pm1.67$, Advance군에서는 $5.37\pm0.68$, Fuji Ortho LC군에서는 $4.41\pm1.61$, Vitremer군에서는 $2.60\pm1.10$ MPa 로 나타났다. 2. 타액 오염시킨 경우 Fuji Ortho LC와 Vitremer는 거의 영향이 없었고 (p>0.05), Ortho-One과 Advance는 큰 폭의 접착 강도 저하 현상을 나타냈다 (p<0.05). 3. Advance와 Ortho-One, Fuji Ortho LC는 만족할 만한 인장 접착 강도를 나타내어 브라켓 접착시 임상적 유용성이 있으리라 생각된다.

• Journal of Korean Dental Science
• /
• 제1권1호
• /
• pp.28-34
• /
• 2008

Objectives. The objectives of this study were: 1) to compare the effect of varying timing of light curing on shear bond strength, and; 2) to compare the shear bond strength of three self-adhesive cements. Materials and methods. A total of 72 extracted non-carious teeth were divided into 24 for Unicem tests, 24 for Maxcem tests, and 24 for Biscem tests; they were assigned 3 * 2 subgroups of 12 teeth each. The specimens were prepared as follows: 1) The calculus and periodontal ligament were removed from the teeth; 2) The teeth were stored in normal saline; 3) The occlusal enamel of each tooth was removed using high-speed coarse diamond burs under water cooling, and; 4) Finally, the teeth were flattened by 600-grit silicone carbide paper disks. Resin blocks were adhered using either Unicem, Maxcem, or Biscem. Light curing timing was divided into two groups: U10, M10, and B10 were exposed to light after 10 seconds, and; U150, M150, and B150 on the other side were exposed to light after 150 seconds. Shear bond strength was measured by a Universal testing machine with cross head speed of 1mm/min. T-test and One way ANOVA were used for the statistical analysis of data. Results. The shear bond strength of U150 was not significantly higher than that of U10 (U150: 20.55.7Mpa, U10: 18.73.80Mpa). On the other hand, the shear bond strength of M150 was significantly higher than that of M10. The shear bond strength of B150 was also significantly higher than that of B10 (M150:14.45.7Mpa, M10: 9.94.2Mpa, B150: 24.38.3Mpa, B10: 17.27.3Mpa). When the light curing timing was 10sec after bonding, the shear bond strength of Unicem was highest; the shear bond strength of Biscem was highest when the light curing timing was 150sec after bonding (U10: 18.73.80Mpa, B150: 24.38.3Mpa). Significance. Since Unicem is less sensitive based on light curing timing, dentists seem to use it without considering the light curing timing. Maxcem showed the lowest bonding strength (especially M10). Thus, when using Maxcem, dentists need to delay the light curing after adhesion.

• 대한치과보철학회지
• /
• 제17권1호
• /
• pp.23-34
• /
• 1979

In this study, the adhesive strength of three commercial polycarboxylate cements to ten types of dental casting alloys, such as gold, palladium, silver, indium, copper, nickel, chromium, and human enamel and dentine were measured and compared with that of a conventional zinc phosphate cement. The $8.0mm{\times}3.0mm$ cylindrical alloy specimens were made by casting. The enamel specimens were prepared from the labial surface of human upper incisor, and the dentine specimens were prepared from the occulusal surface of the human molar respectively. Sound extracted human teeth, which had been kept in a fresh condition since, extraction, were mounted in a wax box with a cold-curing acrylic resin to expose the flattened area. The mounted teeth were then placed in a Specimen Cutter (Technicut) and were cut down under a water spray, and then the flat area on the all specimens were ground by hand with 400 and 600 grit wet silicone carbide paper. Two such specimens were then cemented together face-to-face with freshly mixed cement, and moderate finger pressure was applied to squeeze the cement to a thin and uniform film. All cemented specimens were then kept in a thermostatic humidor cabinet regulated at $23{\pm}2^{\circ}C.$ and more than 95 per cent relative humidity and tested after 24 hours and 1 week. Link chain was attached to each alloy specimen to reduce the rigidity of the jig assembly, and then all the specimens were mounted in the grips of the Instron Universal Testing Machine, and a tensile load was delivered to the adhering surface at a cross head speed of 0.20 mm/min. The loads to which the specimens were subjected were recorded on a chart moving at 0.50 mm/min. The adhesive strength was determined by measuring the load when the specimen separated from the cement block and by dividing the load by the area. The test was performed in a room at $23{\pm}2^{\circ}C.$ and $50{\pm}10$ per cent relative humidity. A minimum of five specimens were tested each material and those which deviated more than 15 per cent from the mean were discarded and new specimens prepared. From the experiments, the following results were obtained. 1) It was found that the adhesive strength of the polycarboxylate cement to all alloys tested was considerably greater than that of the zinc phosphate cement. 2) The adhesive strength of the polycarboxylate cements was superior to the non precious alloys, such as the copper, indium, nickel and chromium alloys, but it was inferior to the precious gold, silver and palladium alloys. 3) Surface treatment of the alloy was found to be an important factor in achieving adhesion. It appears that a polycarboxylate cement will adhere better to a smooth surface than to a rough one. This contrasts with zinc phosphate cements, where a rough helps mechanical interlocking. 4) The adhesion of the polycarboxylate cement with enamel was found superior to its adhesion with dentine.

• 대한소아치과학회지
• /
• 제32권1호
• /
• pp.136-143
• /
• 2005

이차 우식은 수복 실패의 주된 원인 중 하나로 지목되고 있으며, 이로 인해 빈번히 재수복을 하게 된다. 이차 우식은 항우식 작용이 있는 불소를 함유한 수복물을 사용하여 예방될 수 있다. 구강내에서 불소를 유리하는 것으로 알려진 글라스 아이오노머 수복재는 불소를 장기간 유리할 뿐 아니라 불소의 재충전 및 재유리 능력이 있어 불소의 저장소 역할을 할 수 있다. 따라서 본 연구는 통상의 글라스 아이오노머와 고점도 글라스 아이오노머 및 복합 레진을 대상으로 불소의 유리 양상과 불소도포를 통한 재흡수 후 유리 양상을 알아봄으로써 기존의 수복재와 새로운 수복재간의 임상적 유용성을 평가할 목적으로 시행하였다. 4종의 수복재를 대상으로 불소 유리량 및 2% NaF로 재충전 후 불소 유리량을 각각 측정하여 다음과 같은 결과를 얻었다. 1. 실험 대상의 모든 글라스 아이오노머 수복재는 초기에 다량의 불소를 유리하고 이후 점차 감소하는 경향을 보였다. 2. 2% NaF 용액을 통한 재충전 후의 유리량은 Fuji IX, Ketac Fil, Ketac Molar, Z-100의 순으로 나타났다. 3. Fuji IX을 제외한 모든 실험 대상의 수복재에서 수분의 영향으로 표면 경도는 유의하게 감소하였고 불소 재충전 후 유리량은 수분 흡수와 비례하였다(P<0.05). 4. Fuji IX이 초기 유리량에 비해 재충전 후 더 많은 불소를 유리였다(P<0.05).

• Imaging Science in Dentistry
• /
• 제48권2호
• /
• pp.97-101
• /
• 2018

Purpose: This study evaluated the radiopacity of contemporary luting cements using conventional and digital radiography. Materials and Methods: Disc specimens (N=24, n=6 per group, ø$7mm{\times}1mm$) were prepared using 4 resin-based luting cements (Duolink, Multilink N, Panavia F 2.0, and U-cem). The specimens were radiographed using films, a complementary metal oxide semiconductor (CMOS) sensor, and a photostimulable phosphor plate (PSP) with a 10-step aluminum step wedge (1 mm incremental steps) and a 1-mm-thick tooth cut. The settings were 70 kVp, 4 mA, and 30 cm, with an exposure time of 0.2 s for the films and 0.1 s for the CMOS sensor and PSP. The films were scanned using a scanner. The radiopacity of the luting cements and tooth was measured using a densitometer for the film and NIH ImageJ software for the images obtained from the CMOS sensor, PSP, and scanned films. The data were analyzed using the Kruskal-Wallis and Mann-Whitney U tests. Results: Multilink (3.44-4.33) showed the highest radiopacity, followed by U-cem (1.81-2.88), Panavia F 2.0 (1.51-2.69), and Duolink (1.48-2.59). The $R^2$ values of the optical density of the aluminum step wedge were 0.9923 for the films, 0.9989 for the PSP, 0.9986 for the scanned films, and 0.9266 for the CMOS sensor in the linear regression models. Conclusion: The radiopacities of the luting materials were greater than those of aluminum or dentin at the same thickness. PSP is recommended as a detector for radiopacity measurements because of its accuracy and convenience.

• Journal of Periodontal and Implant Science
• /
• 제39권4호
• /
• pp.437-441
• /
• 2009

Purpose: The purpose of this report is to show three cases treated by an intergrated periodontal and restorative dentistry approach. Methods: Three patients with Miller Class Ⅰgingiva recessions associated with cervical lesions were enrolled for treatment. Two patients received a connective tissue graft and resin modified glass ionomer, and one patient was treated with a connective tissue graft, resin restoration. Keratinized gingiva and relative gingival recession were measured. Results: The mean reduction of relative gingival recession was 3.7 mm, and the mean keratinized gingiva increase was 2.5 mm. The percentage of root coverage was 80% in average. No signs of gingival inflammation or bleeding on probing were seen. The patients were satisfied with the final esthetics and had no more dentin hypersensitivity. Conclusions: This report indicates that teeth with Miller ClassⅠ gingival recession associated with cervical lesions can be successfully treated by a connective tissue graft combined with restorative dentistry. However, longitudinal randomized controlled clinical trials must be performed to support this approach.

• Restorative Dentistry and Endodontics
• /
• 제12권2호
• /
• pp.111-116
• /
• 1987

The experimental study was made to evaluate the influence of retentive grooves on the canal wall upon the retention of post, using different type of cements. Ninety periodontally involved anterior teeth were extracted and divided into six groups of 15 teeth. The groups were labeled as follows: Group I: Dentatus post cemented zincphosphate cement into post hole with smooth wall. Group II: Dentatus post cemented with zincphosphate cement into post hole with retentive grooves. Group III: Dentatus post cemented with glass-ionomer cement into post hole with smooth wall. Group IV: Dentatus post cemented with glass-ionomer cement into post hole with retentive grooves. Group V: Dentatus post cemented with composite resin adhesive into post hole with smooth wall. Group VI: Dentatus post cemented with composite resin adhesive into post hole with retentive grooves. The tensile strength was tested by an Instron type tester with cross-head speed of 5mm per minute. The results were as follows: In the group without retentive grooves, three kinds of cement have little effect upon retentive capacity of Dentatus post. The Dentatus post cemented on the canal wall with retentive grooves is more retentive than Dentatus post without retentive grooves.

• 구강회복응용과학지
• /
• 제18권3호
• /
• pp.157-170
• /
• 2002

IPS Empress 2의 산 부식 후 표면 처리재와 레진 시멘트 종류에 따른 전단 결합 강도를 비교 분석하기 위해서 실란 처리, 실리카 코팅 그리고 Targis link 처리군으로 분류하고 Panavia F, Variolink II와 Rely-X ARC 레진 시멘트 세종류를 이용해서 9개군에 각 군당 30개의 시편을 제작하였다. 그리고 구강환경에서의 변화를 알아보기 위해서 구강환경과 유사한 조건으로 $37^{\circ}C$ 증류수에서 24시간 수중침지, $37^{\circ}C$ 증류수에서 5주간 수중 침지, 그리고 5주간 수중침지 중 매주 2000회씩 10,000회의 열 순환을 한 다음 각 시편의 전단결합강도를 측정하고 파절면을 주사 전자현미경으로 관찰하여 다음과 같은 결론을 얻었다. 1. 표면처리에 따른 전단결합강도는 모든 군에서 유의한 차이를 보였다. 실란 처리, 실리카 코팅, 그리고 Targis link의 순으로 유의한 결합력의 감소를 보였다(p<0.001). 2. 레진 시멘트의 종류에 따른 차이를 비교한 결과에서 Targis link 도포한 군만 제외하고 나머지 군에서는 레진 시멘트의 종류에 따른 결합강도의 차이를 보였다(p<0.05). 3. 수중 침지 시간에 따른 전단 결합강도는 모든 군에서 유의한 차이를 보이지는 않았지만 실란을 처리 후 Panavia를 사용한 군, 실리카 코팅 처리 후 Variolink를 사용한 군, Targis link 처리 후 Rely-X ARC와 Variolink를 사용한 군에서는 결합력의 감소를 나타내었다(p<0.05). 4. 열 순환 시행시에는 실란과 실리카 코팅 처리후 Rely-X ARC를 사용한 군과 실리카 코팅 처리후 Panavia F를 사용한 군만 제외하고 나머지는 유의한 결합력의 감소를 보였다(p<0.05). 5. 파절 시험 후 시편에 대한 주사 전자 현미경 관찰결과 모든 군에서 복합성 파절 양상을 보였다.