• Journal of the Mineralogical Society of Korea
• /
• v.31 no.3
• /
• pp.137-147
• /
• 2018

The aim of this study was to leach penalty elements, such as Bi and As, effectively through microwave leaching of a gold concentrate sample containing penalty elements with nitric acid solution. For this purpose, the time effect of microwave leaching, nitric acid concentration effect, and sample addition effect in a microwave were examined. The experiment, demonstrated that the leaching rate of penalty elements increased as microwave leaching time and nitric acid concentration increased and concentration addition decreased. When a microwave heating experiment was carried out on the concentrate and ore minerals, Bi was removed by as much as 90%, and the phase of arsenopyrite was transformed in the order of arsenopyrite (FeAsS), pyrrhotite (FeS), and hematite ($Fe_2O_3$). When the X-ray diffraction (XRD) analysis was carried out with solid residue, elemental sulfur and anglesite were identified. The intensity of the XRD peaks of elemental sulfur and anglesite increased, and the peaks were sharper when the microwave leaching time was 12 min instead of 1 min, the nitric acid concentration was 4 M in rather than 0.5 M, and the concentration addition was 30 g rather than 5 g. This was probably because more elemental sulfur and anglesite were generated in the leaching solution as the leaching efficiency increased. Bi can be leached as valuable elements in the leaching solution through microwave leaching processes while they are released to the environment through a microwave heating processes.

• Journal of Applied Biological Chemistry
• /
• v.59 no.4
• /
• pp.331-336
• /
• 2016

Analytical methods for methiozolin in soil, water and turfgrass were established and dissipation patterns of methiozolin in soil and turfgrass were elucidated. Analysis was done using a high performance liquid chromatography with an ultra violet detector at the wavelength of 280 nm after extraction with acetone, liquid-liquid partition with dichloromethane, and a solid phase extraction purification. Limit of determination and Limit of quantitation were 1.0, 0.5, 1.0 ng, and 0.001, 0.1, 0.01 mg/kg for water, turfgrass, and soil, respectively. Recovery rates of methiozolin from soil, water, and turfgrass were ranged 87.5~111.3, 92.8~97.4, and 78.2~98.5 %, respectively. The turfgrass and soil samples were collected at 0, 1, 4, 7, 14, 30, 45, and 60 after spray on green area in golf course. Residues of methiozlolin were not translocated to lower soil layer but detected only in turfgrasses and root area of turfgrass. Half-lives of methiozolin in turfgrass were 10.7 days and 8.8 days in soil from root area.

• Korean Journal of Microbiology
• /
• v.54 no.2
• /
• pp.105-112
• /
• 2018

To compare the denitrification efficiency, this study used molasses and methanol were used as external carbon sources. Specific experimental conditions were classified according to C/N ratio conditions. The batch test showed that the denitrification efficiency increased as C/N ratios of molasses and methanol rose. The most suitable C/N ratio of molasses turned out 4:1 considering the concentration of the residue chemical oxygen demand (COD) and the denitrification efficiency, which was 91.4%. Specific denitrification rate (SDNR) drawn as a kinetic factor demonstrated that molasses and methanol showed similar SDNR values as C/N ratios of molasses and methanol increased. Under the condition of C/N ratio 4:1, 0.0292 g $NO_3{^-}-N$ removal/g mixed liquor volatile suspended solid (MLVSS)/day (molasses), 0.0299 g $NO_3{^-}-N$ removal/g MLVSS/day (methanol) were found. Sludge adapted to molasses showed that Bacterium Pseudomonas sp. and Bergeylla sp. dominated through an analysis of microbial community. In addition, some bacteria were high convergences than the variety of microbial community. Accordingly, it was assumed that molasses focus on growing microorganisms specialized in denitrification and applied as a replaceable external carbon source that can enhance denitrification performance.

• Microbiology and Biotechnology Letters
• /
• v.30 no.1
• /
• pp.8-14
• /
• 2002

Pseudomonas sp. S-47 is capable of degrading 4-chlorobenzoate to produce 5-chloro-2-hydroxymuconic semialdehyde (5C-2HMS) by the enzymes encoding by xylXYZLTE cluster. In this study, the resulting 5C-2HMS was confirmed to be transformed to 5-chloro-2-hydroxymuconic acid (5C-2HMA) by 5C-2HMS dehydrogenase. The xylG gene encoding 5C-2HMS dehydrogenase was cloned from the chromosomal DNA of strain S-47. The nucleotide sequence of xylG showed to be composed of 1,600 base pairs with ATG initiation and TGA termination codons. A deduced amino acid sequence of the 5C-2HMS dehydrogenase (XylG) exhibited 98％, 93％, and 89％ identity with those of the dehydrogenases from P. putida mt-2, P. putida G7, and Pseudomonas sp. CF600, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.4
• /
• pp.333-340
• /
• 1997

An analytical method was developed to determine residues of haloxyfop-R and its methyl ester in soils and soybeans using gas-liquid chromatography (GLC) with electron capture detector (ECD). Soil or soybean sample was acidified and extracted with acetone. The extract was then subjected to ion-associated partition to individually separate haloxyfop-R and the neutral methyl ester. One phase containing haloxyfop-R was methylated with $BF_3$/methanol, partitioned to n-hexane and analyzed by GLC/ECD. The other phase containing the methyl ester was further purified by Florisil column chromatography prior to GLC determination. No cross contamination was found between two phases containing each of the acid and methyl ester, thus two compounds can be separately determined as the identical haloxyfop-R-methyl. Overall recoveries of haloxyfop-R from fortified samples averaged 88.2${\pm}$3.9% (n=12) and 88.3${\pm}$4.0% (n=6) for soils and soybeans respectively, and those of haloxyfop-R-methyl showed mean values of 89.2${\pm}$4.0% (n=12) and 85.6${\pm}$5.6% (n=6). Detection limits of both haloxyfop-R and its methyl esterwere 0.005㎎/㎏ and 0.01㎎/㎏ for soil and soybean samples respectively.

• The Korean Journal of Pesticide Science
• /
• v.19 no.1
• /
• pp.22-31
• /
• 2015

This study was carried out to monitor the current status of pesticide residues in selling agricultural products via online and assessed their safety in 2014. A total of 124 samples were purchased six times from March to August 2014 twenty online shopping malls randomly. These samples were analysed 208 pesticides by multiresidue method using a GC-ECD/NPD and a LC-MS/MS and confirmed by a GC-MSD. As a result of analysis, residual pesticides samples were 11 (8.9%) such as leek, young radish, welsh onion etc, of which 2 samples (1.6%) such as sesame bud (Chlorothalonil), artemisia (Chlorpyrifos) were violated Korea Maximum Residue limits (MRLs). 11 kinds of pesticides (19 times) were detected in 11 samples. Risk assessment evaluated human health exposure with the ratio of EDI (Estimated daily intake) to ADI (Acceptable daily intake) of pesticides detected. %ADI (the ratios of EDI to ADI) were 0.04~95.70% and some samples represented a fairly dangerous levels. In particular, Chlorothalonil in the sesame bud was shown as a significant risk close to 100% of %ADI. Accordingly, it is recommended to strengthen a safety check on agricultural products in online sales.

• Resources Recycling
• /
• v.8 no.5
• /
• pp.34-43
• /
• 1999

An elecmc arc cracking reaclor is developed for the productiol~o f ieusuble fuel gas by the thennal destruction of waste oil. The churaclensucs of product gas and ~esiduesf rom arc crachng of wnste lubr~cat~nogil are sludird. Thc product gas is mainly coruposcd of hydrogen 135-4076), acetylene (13-4076), ethylene 13-476) and olher hgdrocnrbons. The contenr of carbon monomde, one or the main product in a conventional low-temperature Lhennal cracking umt, 1s very slnvll in lhis atc cracking expcnmcnt. Total calocctic wlue of product gas shows 11,000-13.000 kcizlkg, which is hiph cnough to use as a ~ L I I I Cga~ s . and the concentralions oC loxic gases arc well below the rcguliltury emission critena The GCIMS analysis of llquld-phase residues shows that the high rnalccular welgllt hydrocilrbons in the waste oil arc cracked into the low malecular weight hydrocarbons snd hydroem,. The dehydrogcnntion is found lo be Lhe main cracking rcacuon due lo the high temperalure ~ ~ ~ d ubcyc edle ctric arc. The average parucle size of soot as the solid-phase residue is 10 3 wm, and the conlents of cabon a ~ hdea vy metals are abovc 60% and under 0.01 ppm, respecttrely. Thc utllizvtion or sool, as industl-id1 rcsource seems lo he reasible aIter refimng.

• Resources Recycling
• /
• v.25 no.1
• /
• pp.3-9
• /
• 2016

The leaching behavior of gold from waste CPU chip using Iodide/Iodine solution was studied. The direct leaching of gold with Iodide/Iodine solution for CPU chip under the size of 150 mesh showed leaching ratio of 20%. It was assumed that the copper film was produced on the gold particle during grinding process and the copper film prevents lodine/Iodide solution from contacting with leachable gold. Meanwhile, the extraction of gold was improved to 90% by pretreatment process with $HNO_3$ solution. In order to explain the result, EDS and ICP analysis for the leaching residue were conducted. It was found that the copper coated on the surface of the gold particle was removed about 80% by $HNO_3$, resulting in the increment of gold leaching rate.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.2
• /
• pp.301-312
• /
• 1996

This study was performed to search a optimal analyzing method of cadmium in whole-blood. Cadmium was determined by graphite furnace atomic absorption spectrometry(GFAAS). We investigated the effect of ashing temperature on the absorbance of cadmium in a simple dilution(ten-fold) method with triton X-100 and matrix modifier methods treated with $NH_4H_2PO_4$(1 and 3%) and $Pd(NO_3)_2$(0.00l and 0.005%) as matrix modifier. We also compared the reported reference values of standard blood with values resulted from optimal analyzing conditions of this study. In case of a simple dilution method, when ashing temperature was set at $450^{\circ}C$, the absorbance of sample and background were $0.334{\pm}0.012$ and $1.382{\pm}0.245$, respectively. Background level was higher than the value(0.8) that can be corrected by $D_2$ background correction method. As ashing temperature was rised to $500^{\circ}C$, the absorbance of sample and background were $0.178{\pm}0.008$ and $0.711{\pm}0.223$ respectively. The higher ashing temperature($450^{\circ}C-650^{\circ}C$) was, the lower the absorbance of sample was. In case of a matrix modifier method with $NH_4H_2PO_4$(1 and 3%), when ashing temperature was rised from $500^{\circ}C$ to $650^{\circ}C$, the absorbance of sample slightly changed. The absorbances of sample at $600^{\circ}C$ were $0.230{\pm}0.017$ and $0.137{\pm}0.012$, respectively. These values were larger than that of simple dilution method. But the absorbance of background was higher than the level that can be corrected by $D_2$ method. In case of a matrix modifier method with $Pd(NO_3)_2$(0.001 and 0.005%), the absorbance of sample and background were higher than those of other methods and were stable and reproducible. When ashing temperature was over $550^{\circ}C$, the absorbance of sample was significantly decreased. In case of 0.005% $Pd(NO_3)_2$ carbon residue remained in graphite tube affected the absorbance of sample and background. From these results, We propose that in case of a simple dilution(ten-fold) method with triton X-100 ashing temperature must be maintained below $400^{\circ}C$. In order to diminish the absorbance of background, the alternative method is attenuation of injection volume or multiplication of dilution ratio. We recommend $Pd(NO_3)_2$ than $NH_4H_2PO_4$ as a matrix modifier. In case of a matrix modifier method with $Pd(NO_3)_2$ ashing temperature might be maintained below $550^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.45 no.1
• /
• pp.90-96
• /
• 2013

The anti-obesity effect of ethanol xtract and their fractions from Rumex Crispus L. on the differentiation of 3T3-L1 pre-adipocytes to adipocytes was investigated by suppressing adipocyte differentiation and lipid accumulation with Oil red O assay, western blot and real-time PCR analysis. Ethyl acetate fraction of Rumex crispus L. significantly inhibited adipocyte differentiation when treated during the adipocyte differentiation process, as assessed by measuring fat accumulation using Oil red O staining. In inducing differentiation of 3T3-L1 preadipocytes in the presence of an adipogenic cocktail, isobutylmethylxanthine (IBMX), dexamethasone- and insulin-along with ethyl acetate fraction residue processing treatment significantly decreased protein expression of obesity-related proteins, such as peroxisome-proliferators-activated-receptor-${\gamma}$ ($PPAR{\gamma}$) and CCAAT enhancer-binding-proteins ${\alpha}$ ($C/EBP{\alpha}$). These results indicate that ethyl acetate fraction of Rumex crispus L. is the most effective candidate for preventing obesity. However further studies will be needed to identify the active compounds that confer the anti-obesity activity of ethyl acetate fraction from Rumex crispus L.