• Korean Journal of Food Science and Technology
• /
• v.43 no.1
• /
• pp.6-11
• /
• 2011

Vinyl chloride (VC) and vinylidene chloride (VDC), which may be present in poly(vinyl chloride) (PVC) and poly(vinylidene chloride) (PVDC) food packaging, were analyzed by using a headspace-gas chromatograph (GC)/mass spectrometer (MS) equipped with a PLOT Q column. 1-Chloropropane (1-CP) was used as an internal standard. The determinations of VC and VDC were carried out by monitoring the characteristic ions for each compound: m/z=61, 62, 64 and m/z=61, 96, 98, respectively. The method validated in this study can be suitable for the compliance test of EU regulation. Among 103 food packaging samples, VC and VDC were not detected, except in one PVDC food package. However, the detected level of VDC in the sample was below the EU regulatory specific limitation.

• Journal of Korean Society of Forest Science
• /
• v.19 no.1
• /
• pp.1-23
• /
• 1973

The results of ground vegetation experiment conducted at completely denuded forestland in the mudstone region are summerized as follows: On the reaults of soiling quantity the effect of soiling was observed where depth of soiling over 10 cm was practiced, and a plot where treated with 15cm soiling and without fertilizer showed poor growth and it was even worser than the plot where soiling was practiced only 1 cm in thikness but applied adequate amount of fertilizers. The depth of slits between 30cm and 40cm showed no significant difference in the effect. A plot where covered with vegetation bag showed somewhat better results in seed loss and early growth but no differences observed in the fall result over the none covered plot. And then, it is recommendable to have soiling over 10cm in thikness with slit of 30cm and 30cm in depth and to apply 30 gram of fertilizer (22;22:11, 50 gram) per slit. On various soiling materials trial there were no striking differences in the effect of soiling between weathered granite soil, wheathered tuffs soil and weathered mudstone soil. In the treatment with various green materials, a plot treated with straw mat showed a significant difference at 1 percent. The results show that weathered mudstone soil is effective to use as soiling materials and straw mat treatment was better. On forest fertilization trial, in the mudstone region where red and black pine trees already existing at a rate of 2,000-3,000 trees per hectare had applied 110kg of compound fertilizers (9:12:3 and 22:22:11) per hectare basis in terms of plant nutrient. As a result, the difference in effect between the compound fertilizers was not found however the leaf color and leaf length of the fertilizer added plot showed darker and longer at 30 percent over the no fertilizer received plot. Compound fertilizers, 14:37:12 and 9:12:3 were applied to alder trees at a rate of 20 gram and 40 gram per tree in terms of plant nutrient and a remarkable growth accelerantion was observed where 40 grams of plant nutrient applied. The effect difference between the compound fertilizers was not found. On investigation of tree root elongation, forty years old red pine trees showed only 15cm tap root elongation through mudstone while black pine had 23 cm tap root elongation. The total length of supporting root elongtion of red and black pines showed 20 and 13 meters, respectively. The tap roots of Black locusts were not able to elongate through mudstone, however, the supporting roots tended to develop to the underneath of pine tree where some moisture content is available. Black locusts And grown on the residual soil of mudstone normally die between 8 to 10 years. The red pine trees show flat in tree shape while black pine had triangle in the shape. With the results it can be said that in an artificial reforestation in denuded forest land of the mudstone region the adequate slit and enough amount of fertiliizer application must be provided for the succesful performance of the program. On integrated experimental results of 1972. for the establishment of ground vegetation on the completely denuded forest land in mudstone region, soiling could be effectively practiced with weathered mudstone soil and it would not specially necessiate to have either weathered granite or tuffssoil for the soiling. And the soiling depth should be more than 10 cm in thickness. Among green materials used the straw mat proved to be the most effective reatment. Three major factors which enable to establish ground vegetation by the shortest period of time: A. Physical improvement of soil is necessary to breakdown of the horizontal cracks sushas Slit, contour line plot, seeding hole and etc., and soiling with weathered mudstone soil. B. Chemical improvement of soil: is needed sufficient amount of fertilizer application 300~400kg ha, $N+P_2O_5+K_2O$), and increased production of ground covering and expedite resolution of the vegetation (ground vegetation, fallen leaves and twigs). C. Complete establishment of the basic structure for the erosion control (Prevention of surface soil erosion)

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.6
• /
• pp.843-851
• /
• 2003

An experiment was conducted to investigate the effects of pre-wilting Bana grass (Pennisetum purpureum x P. americanum) herbage under sunny conditions for 0, 6, 18, 24, 32 and 48 h and ensiling it with maize meal. Four levels of maize meal(viz., 0, 5, 10 and 15% on fresh weight (Fw) basis) were tested. The experiment had a split-plot design. Wilting increased the concentration of water soluble carbohydrates (WSC) significantly (p<0.001) on a Fw basis, although there were no significant changes on DM basis. Unwilted grass contained $36.1g{\cdot}WSC{\cdot}kg^{-1}{\cdot}Fw$ ($127.6g{\cdot}kg^{-1}{\cdot}DM$) and this increased to $64.1g{\cdot}WSC{\cdot}kg^{-1}{\cdot}Fw$ ($116.7g{\cdot}kg^{-1}{\cdot}DM$) after 48 h of pre-wilting. Wilting also increased the DM content of herbage significantly (p>0.001) from 250 to $620g{\cdot}kg^{-1}$, between 0 and 48 h respectively. The concentration of fermentation end-products decreased (except butyric acid) and pH increased when the period of wilting increased, indicating that fermentation was restricted. In particular, lactic acid content declined from 50.8 to $26.2g{\cdot}kg^{-1}{\cdot}DM$ (p<0.01) and the residual WSC contents of silage increased from 2.7 with fresh herbage to $18.1g{\cdot}kg^{-1}{\cdot}DM$ with 48 h of wilting (p<0.001). Rapid wilting for 24 h, to a DM of $450g{\cdot}kg^{-1}$ was optimum since important increases in pH, residual WSC and DMD occurred at this level of wilting. Acetic acid, butyric acid and ammoniacal-N contents were lowest with 24 h of wilting. There were no significant interactions between length of wilting and the incorporation of maize meal. Wilting had a greater influence on fermentation than the incorporation of maize meal. Addition of maize meal facilitated fermentation by increasing forage DM content and reducing effluent production. In addition, the maize meal increased DMD. It was concluded that maize meal should generally be incorporated at a level of 5% on fresh weight basis.

• Journal of Korea Port Economic Association
• /
• v.31 no.1
• /
• pp.1-14
• /
• 2015

The standard GARCH model imposing symmetry on the conditional variance, tends to fail in capturing some important features of the data. This paper, hence, introduces the models capturing asymmetric effect. They are the EGARCH model and the GJR model. We provide the systematic comparison of volatility models focusing on the asymmetric effect of news on volatility. Specifically, three diagnostic tests are provided: the sign bias test, the negative size bias test, and the positive size bias test. This paper shows that there is significant evidence of GARCH-type process in the data, as shown by the test for the Ljung-Box Q statistic on the squared residual data. The estimated unconditional density function for squared residual is clearly skewed to the left and markedly leptokurtic when compared with the standard normal distribution. The observation of volatility clustering is also clearly reinforced by the plot of the squared value of residuals of export volume and values. The unconditional variance of both export volumes and export value indicates that large shocks of either sign tend to be followed by large shocks, and small shocks of either sign tend to follow small shocks. The estimated export volume news impact curve for the GARCH also suggests that $h_t$ is overestimated for large negative and positive shocks. The conditional variance equation of the GARCH model for export volumes contains two parameters ${\alpha}$ and ${\beta}$ that are insignificant, indicating that the GARCH model is a poor characterization of the conditional variance of export volumes. The conditional variance equation of the EGARCH model for export value, however, shows a positive sign of parameter ${\delta}$, which is contrary to our expectation, while the GJR model exhibits that parameters ${\alpha}$ and ${\beta}$ are insignificant, and ${\delta}$ is marginally significant. That indicates that the asymmetric volatility models are poor characterization of the conditional variance of export value. It is concluded that the asymmetric EGARCH and GJR model are appropriate in explaining the volatility of export volume, while the symmetric standard GARCH model is good for capturing the volatility.

• Journal of Korean Academy of Nursing
• /
• v.29 no.6
• /
• pp.1192-1207
• /
• 1999

The purpose of this study was to clarify the dynamic relationships among risk factors of arteriosclerosis and to develop and examine a model which could explain this relationship clearly. Data were collected from medical records of 400 male clients who visited a university hospital located in Inchon for physical examinations, from May 1996 to December 1996. Data were analyzed using the LISREL (Linear Structural Relationship) 8 program. To test the fitness of the hypothesized model, chi-square, RMSR (root mean square residual), GFI (goodness of fit index), CN (critical number) and Q-plot were used. Most of the fitness measurements, except the chi-square showed that the hypothesized model complimented the real data. According to the results, there were trends that obesity and hyperlipidemia were prevalent in heavier smokers, higher alcohol intakers, and groups who excercised less. Also, hypertension was more prevalent in older age, higher alcohol intaker, and higher serum lipid level groups. In contrast to the hypothesis, alcohol intake did not significantly affect serum lipid levels. This might be due to the serum lipid measurements (total cholesterol and trigryceride) used in this study to estimate hyperlipidemia. The direct effect of smoking on hypertension was not significant. However, the total effect of smoking on the hypertension was significant since indirect effects of smoking on hypertension, such as obesity and hyperlipidemia, were significant. The total effect of obesity on hypertension was significant since the indirect effect of obesity on hypertension via hyperlipidemia was significant, although the direct effect of smoking on hypertension was not significant. The degree of explaining hyperlipidemia with smoking, exercise, and obesity was high (60%), however, the degree of explaining obesity with age, smoking, alcohol intake, and exercise was very low (7%). On the basis of these results, high risk factors of arteriosclerosis such as hypertension, hyperlipidemia, or obesity are either directly or indirectly correlated each other. Therefore, it is difficult to predict outcomes for increasing or decreasing the risk factors by simply modulating a factor. Smoking, alcohol, and exercise both directly and indirectly affected major risk factors of arteriosclerosis. Therefore, correcting these variables is required to decrease risk factors. Finally, the relationship among other risk factors which have been known to be related with arteriosclerosis (diet, stress or hereditary) should be clarified in further studies.

• Textile Coloration and Finishing
• /
• v.28 no.3
• /
• pp.125-133
• /
• 2016

In this study, efforts were made to enhance the mechanical properties of the poly(vinyl alcohol) (PVA) fibers of medium molecular weight(number-average degree of polymerization=1735) varying the ratio in $DMSO/H_2O$ mixed solvent and spinning/drawing conditions. The gel fibers prepared from pure DMSO were opaquely frozen in the coagulating bath of $-20^{\circ}C$. However, transparent gel fibers were formed without freezing for the mixture to contain water less than 80wt%. As the amount of water in the mixture increased the residual solvent in the coagulated gel fibers decreased ranging from 85 to 42wt%. The complex viscosity increased with increasing PVA concentration in 80/20 $DMSO/H_2O$ exhibiting remarkable shear thinning at 18wt%. In the Cole-Cole plot, the 18wt% PVA solutions gave a deviated curve from 12 and 15wt% ones. Thus the optimum PVA concentration for the spinning processing of medium MW PVA solutions in 80/20 $DMSO/H_2O$ was determined to 18wt% with rheological concept. Low degree of drawing during hot drawing process in the dry state was available for high bath draft in the coagulation bath. The most improved mechanical properties were observed by applying the highest possible draw ratio attained by reducing bath draft over multi-step drawing process. In the given bath draft, linear relationship was observed between both tensile strength and modulus and draw ratio showing the inflection points at the draw ratio of 19.5 and 18.0 for tensile strength and modulus, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.6
• /
• pp.620-624
• /
• 1992

The analytical performance of glow discharge mass spectrometer (GD-MS), using a flat type ion source is discussed. The efficiency of ion extraction was maximized at the distance between anode and cathode of 6 mm. At the operation condition of 4 mA, -1000 volt, and 1 mbar for the source, the optimum voltages for sampler and skimmer were40 volt and -280 volt, respectively. The intensities of Cu, Zn, and Mn were increased as a function of square root of current approximately. Korea standard reference materials (KSRM) were tested for an application study. The detection limits of most elements were obtained in the range of several ppm at the optimized operating condition. The peaks of aluminum and chromium were interfered by those of residual gases. The depth profile of nickel coated copper specimens (3, 5, 10 ${\mu}m$ thickness) were obtained by plotting time versus intensities of Ni and Cr after checking the thickness of nickel coated using a scanning electron microscope (SEM). At this moment, the sputtering rate of 0.2 ${\mu}m/min$ at the optimum operating condition was determined from the slope of the plot of time to the coating thickness. The roughness spectra of specimen's crater after 16 min, discharge were obtained using a Talysuf5m-120 roughness tester as well.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.2
• /
• pp.379-384
• /
• 2022

In a wireless sensor network, a large number of sensor nodes are deployed in an environment where direct access is difficult. It is difficult to supply power, such as replacing the battery or recharging it. It is very important to use the energy with the sensor node. Therefore, an important consideration to increase the lifetime of the network is to minimize the energy consumption of each sensor node. If the energy of the wireless sensor node is exhausted and discharged, it cannot function as a sensor node. Therefore, it is a method proposed in various protocols to minimize the energy consumption of nodes and maintain the network for a long time. We consider the center point and residual energy of the cluster, and the plot point and K-means (WSN suggests optimal clustering). We want to evaluate the performance of the KOCED protocol. We compare protocols to which the K-means algorithm, one of the latest machine learning methods, is applied, and present performance evaluation factors.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.354-363
• /
• 2007

In order to investigate the optimum rate and interval of silicate fertilizer application for rice cultivation, Chucheong byeo variety, one of commonly cultivated rice cultivar in Korea was planted on two different wetland rice soils located on Hwaseong-si from 2002 to 2005; Jisan series(a member of the fine loamy, mixed, mesic family of Fluvaquentic Endoaquepts), known as "Productive Paddy Soil", without any conspicuous limiting factor, and Seokcheon series (a member of the coarse loamy, mixed, nonacid, mesic family of Fluvaquentic Endoaquetps), known as "Sandy Paddy Soil", sandiness being major limiting factor. There were three rate treatments of silicate fertilizer application; the amount of silicate fertilizers needed to adjust the available soil silicate contents to 130, 200, and $270mg\;kg^{-1}$ was applied, in the first year only. There was an additional plot; applying the amount of silicate fertilizer needed to adjust soil available silicate to 130 ppm every year, which would serve as the base for the evaluation of residual effects of silicate fertilizers in the plots where different rates of silicate fertilizer were applied. From the yield data in first year, it was found that optimum available silica in the soil are $154mg\;kg^{-1$ and $160mg\;kg^{-1}$, in Jisan and Seogcheon soils, respectably. The duration of residual effects of silicate fertilizer was different depending upon the amount of applied silicate fertilizers and the soils. The higher the application rate, the residual effect lasted longer, and the residual effect was lasted longer in Jisan(clay loam) soil than in Seogcheon(sandy loam) soil. During four years, sum of the rate of contribution to increase available soil silica of applied silicate fertilizer in different soils ranged 18.6% and 24.1% in Jisan soil and Seogcheon soil, respectively. This may suggest that much portion of applied silicate would be either lost from the soil or remain in the soil as insoluble form. This deserves further study.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.3
• /
• pp.3860-3871
• /
• 1975

This experiment was carried out to establish the mechanized methods in stumping and root-clearing, which were the most important works in the reclamation of sloping uplands. The determination of optimum teeth interval of rake blades and its operation methods to reduce the quantity of transported topsoil during the works, are the aims of this investigation. A newly designed rake blade, whose net teeth intervals could be regulated by three stages as 15cm, 25cm, and 35cm, was manufactured to attach to the bulldozer of 13ton. The experiments were carried out at Kilsang-Myon, Kwangwha-Gun, from Aug. 9 to Aug. 23, 1975. For each interval, 36 test plots of 50${\times}$10mn in size, which were regulated under three levels of land slopes of 10, 20, and 30% and two different tree stand density of high or medium values, were randomly chosen and arranged by two-replicated split-split plot design. Each stump classified by its diameter was stumped and cleared by the rake dozer to be related between diameter and stumping time. The results obtained in this experiment can be summarized as follows: 1. Stumping times for the diameters ranging from 6 to 18cm of stumps are almost the same and they are not varied by the difference of teeth intervals of rake dozer. 2. By back-ward stumping method, the number of stumps which can be stumped per hour ranges almost from 100 to 170, showing significant difference with respect to the teeth intervals. The working area is sharply varied with not only the stand density of stumps but the teeth intervals. 3. Optimum stumping distance for each teeth interval of rake dozer to minimize the quantity of transported topsoil are varied with such the rates as it is 15m or 20m for 15cm of teeth interval, but 25m for 25cm or 35cm, respectively. The clearing distance could be chosen almost double as long as the operating distance. 4. The working areas per hour of the simultaneous stumping and clearing methods are no significant difference among the various treatments of working conditions, but they are affected by the operating techniques. However, the influencing factors of the working conditions as classified before and the working directions are ranged from 10 to 15 per cent of total working area, respectively. 5. The residual rates of stumps which are not stumped by the rake dozer in each test plot are generally reduced as the teeth interval gets narrower, but there are no significant difference among them. The mean residual rates average to be about 4% for the simultaneous stumping and clearing method. The back-ward stumping method are recommended to be supervised and directed by more than one man, to show the operator where the stumps are located. 6. The results according to the stumping and clearing methods are summarized as Table IV-2. And the selection of working methods is recommended to follow as shown in Fig. IV-9 with respect to the stand density of the field. 7. Generally speaking, the narrower the teeth interval, the better become the working results, but the more the quantity of transported topsoil is increased. Therefore, it is recommended that the teeth interval should be reduced from the present distance of more than 30cm to 25cm or 15cm, by developing suitable working methods through more field works and experiments.