• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.4
• /
• pp.182-192
• /
• 2008

In oder to develop a decision supporting system for oil spill response, the prototype of pollution response support system which has integrated oil spill prediction system and pollution risk prediction system has developed for Incheon-Daesan area. Spill prediction system calculates oil spill aspects based on real-time wind data and real-time water flow and the residual volume of spilt oil and spread pattern are calculated considering the characteristic of spilt oil. In this study, real-time data is created from results of real-time meteorological forecasting model(National Institute of Environmental Research) using ftp, real-time tidal currents datasets are built using CHARRY(Current by Harmonic Response to the Reference Yardstick) model and real-time wind-driven currents are calculated applying the correlation function between wind and wind-driven currents. In order to model the feature which is spilt oil spreading according to real-time water flow is weathered, the decrease ratio by oil kinds was used. These real-time data and real-time prediction information have been integrated with ESI(Environmental Sensitivity Index) and response resources and then these are provided using GIS as a whole system to make the response strategy.

• Journal of Veterinary Clinics
• /
• v.28 no.2
• /
• pp.236-239
• /
• 2011

A 10 month-old female (intact) Maltese dog was presented due to continuous heart murmur. The dog was diagnosed with patent ductus arteriosus (PDA) based on two-dimensional echocardiography, computed tomography (CT) and angiography. Transarterial coil embolization was used for transcatheter occlusion of the PDA. A single coil was placed successfully and effectively occluded the blood flow through the ductus. Continuous heart murmur disappeared immediately the coil placement and no residual flow was detected. Complications and safety following the procedure were evaluated regularly based on clinical signs, cardiac examinations and serum troponin-I concentrations. This is the first clinical application of coil embolization for transcatheter closure of PDA in a dog in Korea.

• Journal of Chest Surgery
• /
• v.46 no.5
• /
• pp.340-345
• /
• 2013

Background: This study aims to evaluate whether or not the method of right vertical axillary minithoracotomy (RVAM) is preferable to and as reliable as conventional sternotomy surgery, and also assesses its cosmetic results. Methods: Thirty-three patients (7 males, 26 females) with atrial septal defect were admitted to the Cardiovascular Surgery Clinic of Cukurova University from December 2005 until January 2010. The patients' ages ranged from 3 to 22. Patients who underwent vertical axillary minithracotomy were assigned to group I, and those undergoing conventional sternotomy, to group II. Group I and group II were compared with regard to the preoperative, perioperative and postoperative variables. Group I included 12 females and 4 males with an average age of $16.5{\pm}9.7$. Group II comprised 14 female and 3 male patients with an average age of $18.5{\pm}9.8$ showing similar features and pathologies. The cases were in Class I-II according to the New York Heart Association (NYHA) Classification, and patients with other cardiac and systemic problems were not included in the study. The ratio of the systemic blood flow to the pulmonary blood flow (Qp/Qs) was $1.8{\pm}0.2$. The average pulmonary artery pressure was $35{\pm}10$ mmHg. Following the diagnosis, performing elective surgery was planned. Results: No significant difference was detected in the average time of the patients' extraportal circulation, cross-clamp and surgery (p>0.05). In the early postoperative period of the cases, the duration of mechanical ventilator support, the drainage volume in the first 24 hours, and the hospitalization time in the intensive care unit were similar (p>0.05). Postoperative pains were evaluated together with narcotic analgesics taken intravenously or orally. While 7 cases (43.7%) in group I needed postoperative analgesics, 12 cases (70.6%) in group II needed them. No mortality or major morbidity has occurred in the patients. The incision style and sizes in all of the patients undergoing RVAM were preserved as they were at the beginning. Furthermore, the patients of group I were mobilized more quickly than the patients of group II. The patients of group I were quite pleased with the psychological and cosmetic results. No residual defects have been found in the early postoperative period and after the end of the follow-up periods. All of the patients achieved functional capacity per NYHA. No deformation of breast growth has been detected during 18 months of follow-up for the group I patients, who underwent RVAM. Conclusion: To conclude, the repair of atrial septal defect by RVAM, apart from the limited working zone for the surgeon in these pathologies as compared to sternotomymay be considered in terms of the outcomes, and early and late complications. And this has accounted for less need of analgesics and better cosmetic results in recent years.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.3
• /
• pp.175-181
• /
• 2002

Intermaxillary fixation and occusal splint are routine procedure for maxillofacial fracture and orthognathic surgery. When these methods could obstruct oral airway the patients who kept intermaxillary fixation and occusal splint in their mouth, are very difficult to breath after surgery. Nasal bleeding and pharyngeal edema due to nasotracheal intubation, residual effect of muscle relaxants, and anesthetic agent could be contributing factor of airway obstruction. In this study, pulmonary function test was evaluated before and after intermaxillary fixation, and intermaxillary fixation with occusal splint in 22 volunteers. The results were as follows 1. FVC, %FVC, $FEV_1$, $FEV_1%$, PEF, $PEF_{50}$, MVV without intermaxillary fixtion were 4.45L, 88%, 4.03L, 90.9%, 10.26L/s, 5.53L/s, and 136.14L/min, and with intermaxillary fixation were 3.51L, 68.67%, 3.06L, 69.39L, 6.52L/s, 3.94L/s, and 69.39L/min. The results with intermaxillary fixation and occusal splint were 2.15L, 42.41%, 1.71L, 38.81%, 2.83L/s, 1.74L/s, and 37.14L/min. 2. Compared with before and after intermaxillary fixation, all values of pulmonary function test were decreased and after intermaxillary fixation and intermaixillary fixation with occulasal splint, the results were decreased. 3. MVV and PEF were decreased significantly with interaxillary fixtion and occusal splint, and FVC was less decreased. It meant that intermaxillary fixation and occluasal splint induced reduction of respiratory flow significantly, but less reduction of respiratory volume. 4. Intermaxillary fixation and occulsal splint induced increase of airway resistance, decrease of expiratory volume and air flow. So severe respiratory difficulty could be seen to all volunteers who kept intermaxillary fixtion and occusal splint. 5. In classification of respiratory difficulty, intermaxillary fixation with occulsal splint induced complex respiratory difficulty more than intermaxillary fixation only did. From the above results, doctors who care patients kept intermaxillary fixation and occusal splint should be aware of respiratory depression caused by these treatment.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.1
• /
• pp.5-12
• /
• 1999

By the PVA-precursor method, polycrystalline powder of $Li_xNi_{1-y}Co_yO_2$, cathode material for lithium battery, was synthesized. Using the powder as the cathode material, lithium ion batteries were fabricated, whose electrochemical properties were measured. The effect of changing synthetic conditions, such as PvA/metal mole ratio, concentration of PVA, degree of polymerization of PVA, pyrolysis condition, and metal stoichiometry, on the battery performance was investigated. Considering the initial performance of the cell, the optimum stoichiometry of the $Li_xNi_{1-y}Co_yO_2$, synthesized by the PVA-precursor method was observed to be x: 1.0 and y=0.26. A minor phase of $Li_2CO_3$, which was generated by the residual carbon in the powder precursor, deteriorated the performance of the cell. In order to eliminate the minor phase, the precursor had to be pyrolyzed under the flow of dry air. Annealing the powder at $500^{\circ}C$ under the flow of dry air also eliminated the minor phase, and the performance of the cell was largely improved by the treatment.

• Journal of Aquaculture
• /
• v.19 no.3
• /
• pp.166-172
• /
• 2006

Induced androgenesis, a form of artificial parthenogenesis is an important tool for the generation and use of genetically isogenic or clonal fish strain. An optimized protocol for the genetic inactivation of mud loach (Misgurnus mizolepis) oocytes (i.e. production of androgenetic haploid) was developed using UV-irradiation. Various dose levels of UV significantly affected the fertilizing capacity of the eggs, hatchability of embryos and incidence of haploidy. Based on the extensive examinations of treatment conditions on embryo viability and haploid incidence, the optimum dose level of UV irradiation was turned out to be $10,800ergs/mm^2$ with 56.9% of hatching success and 94.6% of haploidy. The overall yield of putative androgen under optimized treatment condition was more than 50% out of total eggs inseminated. The success of androgenetic reproduction of haploid genome was verified by flow cytometry and PCR amplification of transgene that is exclusive to either one of parental sexes. However, a small portion $(8\sim11%)$ of presumed androgenetic haploid larvae was proven to contain residual DNA fragment(s) from maternal parent.

• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.555-563
• /
• 2012

Warpage of injection molded product is caused by non-uniform shrinkage during shaping operation and relaxation of residual stress. Robust part design and glass fiber reinforced reins have been adopted to prevent warpage of part. Warpages for part designs have been investigated in this study according to the injection molding conditions. Part design contains flat specimen and two different rib designs in the flat part. Resins used in this study were glass fiber reinforced amorphous plastics, PC and ABS. Different rib designs showed significant differences of warpages in the parts. Various warpages have been observed in the three regions of the part, near gate region, opposite region to the gate, and flow direction region. Results of computer simulation revealed that the warpages were strongly related to glass fiber orientation. Flat specimen showed the smallest warpage and the specimen with ribs to the flow direction showed a high resistance to warpage. Warpage highly depended upon part design rather than molding condition. It was concluded that the rib design and selection of gate location in injection molding would be the most important factors for the control of warpage since those are directly related to the fiber orientation during molding.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.2
• /
• pp.96-110
• /
• 1997

The Wondong Caldera, formed by the voluminous eruption of the rhyolitic ashflows of the Wondong Tuff which is about 1,550 m thick at the intracaldera and 550 m at the outflow, is a resurgent caldera which shows a dome structure on the central exposure of the caldera. The Wondong caldera volcanism eviscerated the magma chamber by a series of explosive eruptions during which rhyolitic magma was ejected, as small fallouts and voluminous ash-flows, to form the Wondong Tuff. The explosive eruptions began with ash-falls, progressed through pumice-falls and transmitted ash-flows. During the ash-flow phase the initial central vent eruption transmitted into late ring-fissure eruption which accompanied with caldera collapse. Contemporaneous collapse of the roop of the chamber resulted in the formation of the Wondong Caldera, a subcircular depression subsiding about 1,930 deep. Following the collapse, quartz porphyry was intruded as ring dykes along the ring fracture near the southwestern caldera rim. Subsequently the central part of the caldera floor began to be uplifted into a circular resurgent dome by the rising of residual magma. Concurrent with the resurgent doming, the volcaniclastic sediments of Hwajeri Formation were accumulated in the caldera moat and then rhyodacite lava erupted from the initial central resurgent dome and another ash-flow tuff from the northern ring fracture. After the sedimentation, the find-grained granodiorite was intruded as an arc along the eastern ring fracture of the caldera. Finally in the central part, the resurgent magma was emplaced as a hornblende biotite granite stock that formed the central dome.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.76-85
• /
• 1993

In order to predict the free surface signature of turbulent ship wakes two things are essential; a basic understanding of the mechanism of turbulent vortical flow/free surface interactions and a mathematical model to accurately predict the signature. The goal of the study described here is both to supplement experimental work to obtain basic understanding, as well as to condense this understanding in a model(or models) that captures the essential phenomena and thus allows predictions. To do so we followed two main paths guided by experimental observations. One is full simulations of the flow using the clavier-Stokes equations. The other is a vortex modeling, where the vortical structures of the flows are approximated by idealized structures, an the interaction assumed to be essentially inviscid. These approaches complement each other. Full simulations are only applicable to small scale phenomena, where the system is simple, and the Reynolds number is low. The vortex modeling, on the other hand, cannot represent essentially viscous aspects of the problem such as the effect of contamination gradient. Obviously, the modeling is what may eventually lead to a prediction method; the full simulations-too limited to mimic all but the simplest circumstances-are to aid and support the construction of realistic models. We address two-dimensional aspects of the vortex/free surface interaction first. Secondly we obtain some basic understanding of the interaction process through an experiment and then talk about several three-dimensional problems hoping to develop a successful prediction model.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.1
• /
• pp.44-59
• /
• 2003

The three-dimensional eco-hydrodynamic model was applied to estimate the effect of water quality improvement by the effluent treatment of landbase-seawater culture system in the Kamak bay The computed residual currents were dominated southward flow at the northern narrow strait and eastward flow and clockwise water circulation at the mouth of the bay, strongly. The mean relative errors of DIP, DIN and COD between the simulated and observed results at 9 stations in the Kamak bay were shown 14.3％, 25.8％ and 14.4％, respectively. There were high concentrations of DIP, DIN and COD at the northwestern bay which is influenced by pollution loads. The simulations were performed using an ecosystem model under the conditions of DIP 90％, DIN 80％ and COD 60％ treatment efficiency by the ozone treatment system of landbase-seawater culture system. As a results of simulation, the improvement effects of DIP, DIN and COD are 34.4~54.0％ (average 46.4％), 0.4~25.4％(average 8.4％) and 15.6~29.4％(average 22.7％), respectively. Therefore the area of seawater quality grade I based on COD was extended in the bay.