• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.2
• /
• pp.67-73
• /
• 2015

Distance relay is widely used for the protection of long transmission line. Most of distance relay used to calculate line impedance by measuring voltage and current using DFT. So if there is a computation error due to the influence of phasor by DC offset component, due to excessive vibration by measuring line impedance, overreach or underreach can be occurs, and then abnormal and non-operation of distance relay can be issue. It is very important to implement the robust distance relaying that is not affected by DC offset component. This paper describes an enhanced distance relaying based on the DC offset elimination filter to minimize the effects of DC offset on a long transmission line. The proposed DC offset elimination filter has not need any prior information. The phase angle delay of the proposed DC offset filter did not occurred and the gain error was not found. The enhanced distance relay uses fault current as well as residual current. The behavior of the proposed distance relaying using off-line simulation has been verified using data about several fault conditions generated by the ATP simulation software.

• Microbiology and Biotechnology Letters
• /
• v.17 no.4
• /
• pp.365-369
• /
• 1989

Thermal inactivation of Tyichoderma viride cellobiohydrolase was investigated by immunoassay and residual enzyme assay such as carboxymethyl cellulase (CMCase) and filter paper degradation activity (FPase). Arrhenius plots of cellobiohydrolase were appeared as straight line. The Z-values of cellobiohydrolase calculated by CMCase, FPase and immunoassay were 5.2$^{\circ}C$, 6.4$^{\circ}C$ and 5.8$^{\circ}C$, respectively. The thermodynamic parameters obtained from FPase were better agreement with those of immunoassay than CMCase assay.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.411-414
• /
• 1998

음성의 음질 향상(Speech Enhancement)을 위한 여러 가지 방법 중에서 주파수 차감법(Spectral Subtraction)은 계산량이 적기 때문에 현재 실시간으로 Speech Enhancement를 할 수 있는 가장 적절한 방법이다. 그러나, 이 방법은 원래의 입력음성에 없던 새로운 잡음을 만들어내는 큰 단점이 있는데, 이를 제거하기 위해 많은 연구가 되어오고 있다. 이러한 연구의 방향은 대부분 주변프레임 또는 주변의 주파수 성분과의 평균을 통해 피크값을 무디게 해 줌으로써 새로 생긴 튀는 잡음을 감소시키는 것이다. 이런 방법은 음성자체의 정보 또한 평균이 되어버리게 하는 새로운 단점을 낳는데, 이런 현상은 무성음구간에서 특히 심각해진다. 본 논문에서는 입력음성의 LPC 분석으로 백색필터(Whitening Filter)를 구성하여 이를 통과시킨 잔류신호(Residual)를 주파수 차감하여 얻은 새로운 잔류신호를 역 필터링하여(Synthesis Filter) 개선된 음성을 얻는 방법을 제안하였다. 제안된 알고리듬은, 주파수 차감시 포만트(Formant)의 정보가 더 유지 될 수 있기 때문에 잔류잡음을 줄일 수 있다. 청취 테스트 결과 제안한 방법이 기존의 방법보다 잔류잡음을 더 줄이는 사실을 확인할 수 있었다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1369-1376
• /
• 2005

In case of the drainage type tunnel, the residual water pressure is likely to act on the tunnel lining due to the decrease of water-passing capacity of the filter material. Therefore, this study discussions a method to predict the lining load with the consideration of water passing capacity of the filter material through the literature review and numerical analysis. It is expected from the results of case studies that the design load acting on the concrete lining in the drainage type tunnel could be assumed to be about 50% of the hydrostatic water pressure in steady-state ground-water condition.

• 전기의세계
• /
• v.31 no.2
• /
• pp.119-125
• /
• 1982

A new approach to the maneuvering target tracking problem is proposed. Its basic concept is to take the maneuver variable from the measurements. Tracking scheme based on the Kalman filter estimates the maneuver varieble from the residual and uses the estimates to update the Kalman filter. The estimation process is independent of target types and a model of the maneuver characteristics. All the filtering algorithms are processed in polor coordinate. Simulation results are presented and compared to that of the extended Kalman filter.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.10a
• /
• pp.73-80
• /
• 1998

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.179-184
• /
• 2019

In this paper, we propose a design method of Active Noise Control (ANC) that reduces perceived level of the residual noise. A FELMS (Filtered-E Least Mean Squares) algorithm is used for the ANC system and the NC (noise criteria) is applied as an evaluation criterion of the residual noise. With this structure, we present the allowable spectral shape of the noise shaping filter that minimizes the NC index within the effective operating frequency band of the ANC, and showed that the filter satisfying in the criterion has a lower NC value than the psychoacoustic-based filter used in the previous studies.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.6
• /
• pp.1743-1758
• /
• 2023

Automatic modulation classification is a critical algorithm for non-cooperative communication systems. This paper addresses the challenging problem of closed-set and open-set signal modulation classification in complex channels. We propose a novel approach that incorporates a self-learning filter and center-loss in Deep Residual Shrinking Networks (DRSN) for closed-set modulation classification, and the Opendistance method for open-set modulation classification. Our approach achieves better performance than existing methods in both closed-set and open-set recognition. In closed-set recognition, the self-learning filter and center-loss combination improves recognition performance, with a maximum accuracy of over 92.18%. In open-set recognition, the use of a self-learning filter and center-loss provide an effective feature vector for open-set recognition, and the Opendistance method outperforms SoftMax and OpenMax in F1 scores and mean average accuracy under high openness. Overall, our proposed approach demonstrates promising results for automatic modulation classification, providing better performance in non-cooperative communication systems.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.4
• /
• pp.444-452
• /
• 2003

An integration system with multi-measurement sets can be realized via combined application of a centralized and federated Kalman filter. It is difficult for the centralized Kalman filter to remove a failed sensor in comparison with the federated Kalman filter. All varieties of Kalman filters monitor innovation sequence (residual) for detection and isolation of a failed sensor. The innovation sequence, which is selected as an indicator of real time estimation error plays an important role in adaptive mechanism design. In this study, the centralized Kalman filter with adaptive measurement fusion is introduced by means of innovation sequence. The objectives of adaptive measurement fusion are automatic isolation and recovery of some sensor failures as well as inherent monitoring capability. The proposed adaptive filter is applied to the GPS/SDINS integration system with an additional sensor. Simulation studies attest that the proposed adaptive scheme is effective for isolation and recovery of immediate sensor failures.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.12
• /
• pp.1230-1242
• /
• 2007

This paper describes an IIR/FIR fusion filter for a nonlinear system, and analyzes the stability of the fusion filter. The fusion filter is applied to INS/GPS integrated system, and the performance is verified by simulation and experiment. In the fusion filter, an IIR-type filter (SPKF) and FIR-type filter (MRHKF filter) are processed independently, then the two filters are merged using the mixing probability calculated using the residuals and residual covariance information of the two filters. The merits of the SPKF and the MRHKF filter are embossed and the demerits of the filters are diminished via the filter fusion. Consequently, the proposed fusion filter has robustness against to model uncertainty, temporary disturbing noise, large initial estimation error, etc. The stability of the fusion filter is verified by showing the closeness of the states of the two sub filters in the mixing/redistribution process and the upper bound of the error covariance matrices. This fusion filter is applied into INS/GPS integrated system, and important factors for filter processing are presented. The performance of the INS/GPS integrated system designed using the fusion filter is verified by simulation under various error environments and is confirmed by experiment.