• The Korean Journal of Applied Statistics
• /
• v.24 no.1
• /
• pp.103-114
• /
• 2011

Current series for testing stock market cointegrations tend to be restricted to analyzing the relations between stock market prices and may not be able to understand the whole picture of the variations in the stock market system. The nature of the variations in the stock prices, between the countries that experienced economic crisis and those did not, are different for a certain period of time, and accordingly excluding the potentially important variables in the stock market system causes statistical bias. This study considers domestic foreign exchange markets and financial markets in testing for the cointegrating relations of the stock prices in Korea and major investing countries. The results demonstrate the possibility of specification errors unless those markets are included in the statistical modeling process.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.4
• /
• pp.476-482
• /
• 2016

In this study, a method using single Wheatstone bridge flexure has been presented to measure hinge moment acting on control surfaces of wind tunnel models. The structural simplicity of the flexure reduces difficulty regarding gauging and wire-routing, and also makes it feasible to install flexures even inside thin wings. Some flexures were designed and fabricated under typical aerodynamic loads in wind tunnel test, and the strains on the flexure according to applied loads were compared with the result of the analysis by finite element method. The relation between applied loads and output signals showed good linearity, and the standard deviation on the residual errors from linear equation obtained by least square method was within 1.0 % of the maximum design moments. In addition, the FEM analysis on the thickness of load-connecting part of the flexure showed that the sensitivity was improved as the thickness became thin as much as desired to avoid buckling.

• Journal of KIISE:Software and Applications
• /
• v.31 no.11
• /
• pp.1474-1482
• /
• 2004

In this paper, we propose an approach for extracting and filtering block motion vectors using an adaptive weight function. We first extract motion vectors from a sequence of images by using size-varibale block matching and then process them by adaptive robust estimation to filter out outliers (motion vectors out of concern). The proposed adaptive robust estimation defines a continuous sigmoid weight function. It then adaptively tunes the sigmoid function to its hard-limit as the residual errors between the model and input data are decreased, so that we can effectively separate non-outliers (motion vectors of concern) from outliers with the finally tuned hard-limit of the weight function. The experimental results show that the suggested approach is very effective in filtering block motion vectors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.736-739
• /
• 2009

In this paper, an efficient lossless compression algorithm using motion adaptation is proposed. It is divided into two parts: a motion adaptation based nonlinear predictor part and a residual data coding part. The proposed nonlinear predictor can reduce prediction error by learning from its past prediction errors using motion adaption. The predictor decides the proper selection of the intra and inter prediction values according to the past prediction error. The reduced error is coded by existing context adaptive coding method. Experimental results show that the proposed algorithm has the higher compression ratio than context modeling methods, such as FELICS, CALIC, and JPEG-LS.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.363-372
• /
• 2007

The residual settlement due to difference between predicted and observed settlement is one of the social problems during reclaiming construction in the soft ground having a deep depth such as Busan and Gwangyang province. Prediction error for the secondary compression settlement makes the construction much harder. To examine characteristics of the secondary compression settlement, the secondary compression index is the most important factor. In this study, various empirical methods for determining the secondary compression index are evaluated. And errors applied to the design case practically are also explained. The pre loading method is the only way to reduce the secondary compression settlement and reduction ratio of the secondary compression should be investigated correctly. Hence, research results on the reduction ratio of the secondary compression are analyzed in this paper. Moreover, decrement of the secondary compression index due to over consolidation ratio is examined closely by laboratory consolidation test using clay in the Gwangyang area.

• Journal of the Korean Institute of Navigation
• /
• v.12 no.2
• /
• pp.23-32
• /
• 1988

This paper offers a method of magnetic compass adjustment for the vessel alongside the wharf using newly designed magnetic north former, which makes the same magnetic field-change as the turning vessel does. The characteristics of the magnetic north former was examined by observing the deviation curves of the magnetic compass installed on the compass deviascop at laboratory. The magnetic north former consists of A and B arms which hold the permanent bar magnets at the both ends of each arm. The arm is to rotae in the horizontal plane about the vertical axis fixed at the center boss of the magnetic compass and it is to compensate the horizontal plane about the vertical axis fixed at the center boss of the magnetic compass and it is to compensate the horizontal component of the earth's field. The B arm makes the artificial magnetic north around the magnetic compass for every ship's heading. The results of investigation are summarized as follows ; 1. The observation and correction of magnetic compass deviation can be done without swinging the ship, of the effect of D coefficient is negligible. 2. The residual deviation curve of the magnetic compass depends on the accuracy of deduced value of ship's multplier($\lambda$). 3. The errors due to the inaccuracy of deduced value of ship's multiplier change in the same way as the B and C coefficient do.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.9
• /
• pp.828-836
• /
• 2015

In this paper, the assessment technique for track accuracy in the phased array radar is proposed. It is assumed that ${\alpha}-{\beta}$ tracking filter to track the target is established in the phased array radar. In order to assess the track accuracy strictly, we should use the real target position data acquired from the special instrument, ACMI(Air Combat Maneuvering Instrument) pod or DGPS(Differential Global Positioning System). However, this method leads to increase the experiment cost and test time. We derive the relationship between the residuals of tracking filter and the standard deviations of range and angle tracking errors which are assigned as track assessment index. The theory of sample variance is introduced in this assessment because track accuracy has to be calculated with many residual samples.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.11
• /
• pp.1079-1086
• /
• 2008

During transfer alignment navigation information transferred MINS(master inertial navigation system) to SINS(slave inertial navigation system) has a changed time delay. The changed time delay degrades the performance of transfer alignment. This paper proposes an adaptive filter that estimates covariance of a time delay in real-time using residual of measurements. The performance of the adaptive filter is compared with that of the EKF(extended Kalman filter) in case of transfer alignment for vertical launcher in the ship. The results show that proposed method is more effective than EKF in estimating attitude errors.

• Explosives and Blasting
• /
• v.34 no.2
• /
• pp.10-17
• /
• 2016

Drilling operation for blasting is an important factor to determine blast effect. Drilling errors that arise from performing drilling for blasting purposes can reduce blasting effect causing residual holes, overbreak, and heterogeneous fragmentation, etc. Automatic drilling system was induced for precise drilling. As a result, drilling error caused by spaces between holes and burden was minor at 0~2.6% and accordingly, blasting effect was improved with over 90% drilling rate, the ratio of overbreak amount to total drilling amount at 4.3%, proportion of fragmentation rock under 50cm at 89~95% and so from this analyses, it was estimated to reduce the total cycle times related to blasting process.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1939-1943
• /
• 2008

Deformation of a mold is measured and analyzed in alignment and curing processes of UV-Imprint Lithography. We are focused on mold deformation caused by a UV resin, which is laminated between a mold and a target glass-panel. The UV resin is viscous in case of liquid state, and the resin will be solidified when being exposed by the ultra-violet light. The viscosity of the resin causes shear force on the mold during the alignment process. Moreover, the shrinkage during phase change from liquid to solid may cause residual stress on the mold. The experiments for measuring temperature and strain are made during alignment and curing process. Strain-gages and thermocouples are used for measuring the strain and variation of temperature on several points of the mold, respectively. The deformation of mold is also simulated and analyzed. The simulation results are compared with the experiments. Finally, sources of alignment errors in large area UV-nanoimprint lithography are discussed.