• 한국항만학회지
• /
• 제13권1호
• /
• pp.123-132
• /
• 1999

It is very important to quantitatively assess the movement of sea water and pollutant dispersion before or after constructing shore structures such as breakwater considering marine environment and long-term utilization of those structures. This assesment is possible through the use of simulation models designed to predict water movement and pollutant dispersion in a certain area. In this study the numerical computations were carried out to predict the sea water quality in the Ilgwang Harbor located at the east coast of Pusan. The flow patters were investigated before and after the development of Ilgwang Harbor. The computational models adopting ADI Method (Alternating Direction Implicit Method) were used here and were already verified from the previous studies. As a results of this study the tidal exchange in Ilgwang Harbor after development proved to be worse due to the increased semi-enclosed at the harbor limit. In order to improve the water quality of this area after development a new method was proposed to improve water quality in the semi-enclosed bay by creation and control of tidal residual currents. For this purpose the unsymmetric structures so called bottom roughness were introduced in this study. The simulation was carried out on the basis of the study by Komatsu et. al. and Gug and we made a conclusion that it is possible to generate a new tidal residual current and to increase the tidal exchange by application of bottom roughness arrangement.

• 한국해양공학회지
• /
• 제24권2호
• /
• pp.57-61
• /
• 2010

At present, welding technology is not only emphasized in the development of manufacturing technology but its application is also expanding. In these systems, attempts have been made to use SUS as a high-temperature material for special applications, and in improvements in manufacturing technologies bear watching, together with an increase in the use rate. Specifically, three-dimensional wings are often used for fasteners with the purpose of decreasing the weight (정해용, 2007). However, due to developments in welding technology, there has been a recent tendency to replace existing assembly methods with welding. Specifically, if laser welding techniques are applied, the heat-affected zone can be minimized compared toother welding techniques. However, in the case of these special welding techniques, there is an increase in residual stress, which fatally affects the fatigue life. In order to remove the residual stress and its effect on fatigue life, shot-peening is executed. The intention of this study was to obtain the optimal conditions for shot-peening.

• 한국컴퓨터정보학회논문지
• /
• 제26권10호
• /
• pp.139-145
• /
• 2021

본 논문에서는 소의 사료 취식량(Feed Intake), 반추(Rumination), 발정기(In Heat) 모니터링 기술을 이용하여, RFI(Residual Feed Intake) 모니터링 및 신진대상 이상을 예측하는 웨어러블 디바이스 및 PC용 웹과 스마트폰 어플리케이션을 이용한 모니터링 시스템을 설계하고 구현하였다. 본 시스템의 개발로 농장주는 경제적 효율성의 증가가 기대된다. 사료 섭취량을 분석하면, 소의 체중에 근거한 추천 사료량과 소가 섭취하는 사료량과의 차이를 확인할 수 있으며, Metabolic disorder(신진대사 이상)에 대한 조기 발견이 가능할 것으로 예상된다. 본 논문의 결과물을 사용하는 농장주는 가장 효율적인 성과를 나타내는 소를 구별할 수 있으며, 소의 표피(목)에 부착하는 웨어러블 장치로부터 입력되는 6축 모션 센서 신호와 웨어러블 장치에 부착된 마이크를 통해 입력되는 소의 목넘김 소리를 통해서 소의 반추와 사료섭취량을 측정할 수 있다. 향후에는 심박, 호흡 등의 추가적인 생체신호를 측정할 수 있도록 개선 작업을 진행할 예정이다.

• 한국토양환경학회지
• /
• 제3권1호
• /
• pp.75-81
• /
• 1998

대부분의 고형화/안정화에 대한 연구는 작은 column(5cm $\times$ 10cm)을 사용하여 흡착 또는 침출(용출)에 대하여 실험하였다. 이러한 자은 기구의 실험은 현장 적용에 있어 많은 어려움을 내포하고 있다. 본 연구는 현장 적용성을 감안하여 큰 정방형(100cm$\times$100cm$\times$100cm)의 Lysimeter를 제작하여 불량폐기물을 벤토나이트와 직접 혼합하여 폐기물의 안정성 및 환경적인 면을 알아보기 위한 기초 실험을 하였다. 실험 결과, 벤토나이트의 혼합비에 따라 중금속 농도는 미세한 변화를 보였다. 침출수의 중금속 및 오염물질농도는 벤토나이트의 혼합비에 따라 중금속 및 오염물질의 농도가 감소되었으며, 특히 오염물질 중 CODcr은 25~30% 제거효과를 나타내고 있다. 또한 불량폐기물에 의한 잔여토사 발생은 전체부피의 약 80%(40$\times$40mm screen) 정도를 나타내고 있다.

• 한국환경과학회지
• /
• 제4권3호
• /
• pp.197-206
• /
• 1995

Surface heat balance of the northern sea of Cheju Island for summer in 1993 and 1994 is analyzed using the observation data obtained by Marine Research Institute, Cheju National University. Each flux elements at the sea surface is derived from the marine meteorological reports with application of an aerodynamical bulk method for the turbulent heat fluxes, and empirical formulae for the long-wave radiation heat fluxes. The flux divergence of oceanic heat transport and the rate of heat storage in the ocean are estimated as residual. The features of the surface heat balance are mainly decided by the solar radiation flux and the latent heat flux for 199B. But the Bowen Ratios were large for 1993. This means that the sensible heat fluxes were nearly equal to the latent heat fluxes for 1993. In this period, mean flux divergence of oceanic heat transport is about 130 W/$m^2$.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.43-48
• /
• 1998

The development of unsteady three-dimensional incompressible viscous solver based on unsteady physical curvilinear coordinate system is presented. A 12-point finite analytic scheme based on local uniform grid spacing is extended for nonuniform grid spacing. The formulation of a condition is suggested to avoid the oscillation of the series summations produced by the application of the method of separation of variables. SIMPLER and pressure Poisson equation techniques are used for solving a velocity-pressure coupled problem. The matrix is solved using the Generalized Minimal RESidual (GMRES) method to enhance the convergence rate of unsteady flow solver and the Kinematic boundary condition of a free surface flow. It is demonstrated that the numerical solutions of these equations are less mesh sensitive.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.235-237
• /
• 2012

Geodae-Uksae 1 is a variety of Miscanthus sacchariflorus recently discovered in Korea. It is being mass-cultivated for use as energy crop due to its superior productivity, as high as 30 ton/ha/yr for the dry mass. This study investigates the method of producing biochar and bio-oil from the crop using slow pyrolysis. Especially, the study focused on assessing the biochar properties for its application to soil to improve soil quality and sequestrate carbon. Using an electrically heated packed bed reactor, the products of slow pyrolysis from Geodae-Uksae 1 were produced over a temperature range of $300-700^{\circ}C$ with a heating rate of $10^{\circ}C/min$. The biochar, condensable vapor (bio-oil) and residual gases were characterized for the physical and chemical properties. It was concluded that the ideal temperature for pyrolysis to produce biochar is $500^{\circ}C$.

• Structural Engineering and Mechanics
• /
• 제32권2호
• /
• pp.235-249
• /
• 2009

The response of concrete structures subjected to shock and blast load involves a rapid transient phase, during which material breach may take place. Such an effect could play a crucial role in determining the residual state of the structure and the possible dispersion of the fragments. Modelling of the transient phase response poses various challenges due to the complexities arising from the dynamic behaviour of the materials and the numerical difficulties associated with the evolving material discontinuity and large deformations. Typical modelling approaches include the traditional finite element method in conjunction with an element removal scheme, various meshfree methods such as the SPH, and the mesoscale model. This paper is intended to provide an overview of several alternative approaches and discuss their respective applicability. Representative concrete material models for high pressure and high rate applications are also commented. Several recent application studies are introduced to illustrate the pros and cons of different modelling options.

• Korean Chemical Engineering Research
• /
• 제40권6호
• /
• pp.694-702
• /
• 2002

활성탄은 산업분야에서 촉매로도 사용되고 용제 회수, 가스 분리, 그리고 악취제거 등 다양한 용도로 사용되고 있다. 본 연구에서는 입상활성탄에서 CTC(Carbon Tetrachloride, $CCl_4$)의 흡착능에 따른 잔존수분의 영향을 연구하였다. 고정층 흡착탑에서 CTC의 입구농도, 유속변화에 따른 파과곡선과 흡착량의 변화 및 활성탄의 잔존수분 탈착특성도 함께 연구하였다. 활성탄의 잔존수분량은 0에서 20%(w/w)범위에 있었으며, 모든 실험은 298.15 K에서 수행하였으며 활성탄에 대한 사염화탄소의 흡착평형실험결과는 Langmuir등온식으로 잘 묘사되었다. 활성탄의 잔존 수분량이 증가함에 따라 $CCl_4$의 흡착량은 감소하였으며 사염화탄소의 흡착에 따른 잔존수분의 탈착은 지수적으로 감소되었고, LDF(linear driving force)모델을 이용하여 파과곡선을 잘 모사할 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.181-184
• /
• 2009

로켓시스템의 에너지원으로 적용할 수 있는 기체발생기용 복합 고체추진제의 개발과정을 기술한다. 80%의 고체입자 부하율과 양호한 유동성, 그리고 $-50^{\circ}C{\sim}70^{\circ}C$에서 경화에 적절한 추진제 물성을 갖는 HTPB를 바인더로 하여, 낮은 화염온도, 적은 고체입자 잔사, 무독성 생성물의 추진제 제조가 가능한 AN을 제1종 산화제로, 탄도특성 제어에 필요한 AP를 제2종 산화제로 추진제 주요 조성이 구성된다. 기본조성을 근거로 하여 일련의 물성개선 시험이 수행되었으며 최대응력 8 bar 및 최대응력점 변형율 30%, 그리고 탄성계수 1000 psi 수준의 물성을 갖는 추진제 조성을 얻을 수 있었다.