• 한국물환경학회지
• /
• 제23권6호
• /
• pp.837-842
• /
• 2007

This study was conducted to test the effect of residual Al on plankton community after dissolved air flotation (DAF) application. Growth rate of phytoplankton after DAF application ($0.37day^{-1}$) was about 2 times lower than that before DAF application ($0.70day^{-1}$). Under the condition of addition of nitrogen and phosphorus without light, growth rate phytoplankton in treatment without residual Al increased in difference with showing the negative growth rate in treatment with residual Al. Under the condition of light without addition of nutrient, growth rate of phytoplankton was no noticeable difference between the before and after DAF application. The relatively high settling rate (0.47 m/day) was observed in treatment after DAF application. Although the abundance of rotifer decreased, the abundance of copepod and cladoceran such as Daphnia galeata, Diaphanosoma sp. and Bosmina longirostris with relative higher grazing was no noticeable difference between the before and after DAF application. In the treatments before and after DAF application with zooplankton, growth rate of phytoplankton was $0.41{\pm}0.08day^{-1}$, $0.20{\pm}0.03day^{-1}$, respectively. This difference was in treatment after DAF application similar with those in treatments before and after DAF application without zooplankton. Those indicate that the filter-feeding effect of zooplankton on phytoplankton community may be not changed by residual Al after the DAF application. These results suggest that residual Al after DAF application be to improve water quality by inhibition of growth rate as well as increasing settling rate of phytoplankton.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.97-102
• /
• 2017

PURPOSES : Emulsified asphalt is critical for road construction. The objective of applying asphalt emulsion as an adhesive is to prevent the phenomenon of debonding between the upper and lower layers. The quantity and veriety of bituminous material can be varied according to the type of pavement and site conditions. The objective of this study is to reveal the optimum application rates of the emulsified asphalt materials by types of tack-coats using Interface Shear Strength(ISS). METHODS : In the research, emulsified asphalt was paved on the surface of the divided mixture. The specimens of paving asphalt emulsion were utilized to evaluate the bond strength of tack-coat materials. In the evaluation process, NCHRP Report 712 was utilized to investigate the Interface Shear Strength, which reflects the bond capacity of asphalt emulsion. Then, the optimum residual application rates by tack-coat types were determined using regression analysis. RESULTS :As a consequence of squared R values investigated from 0.7 to 1 as part of the regression analysis, the tendency of predicted ISS values was compared with the results. The optimum residual application rates of AP-3, RS(C)-4, QRS-4, and BD-Coat were determined to be $0.78{\ell}/m^2$, $0.51{\ell}/m^2$, $0.53{\ell}/m^2$, and $0.73{\ell}/m^2$, respectively, utilizing 4th regression analysis. CONCLUSIONS :Based on the result of this study, it was not feasible to conclude whether higher residual application of tack-coat material leads to improved bond capacity. Rather, the shearing strength varies depending on the type of pavement.

• 대한기계학회논문집
• /
• 제18권12호
• /
• pp.3227-3235
• /
• 1994

This paper deals with an evaluation of the residual stress due to shot peening induced in a carburized gear tooth and its application to the fatigue crack propagation problem. A practical method is proposed on the basis of the assumption that the residual stress is caused by the difference of volume expansion in the case and the core, and the influence of both the reduction of retained austenite and the strain due to shot peening are considered. The evaluated residual stress is close to the measured stress, though the surface stress is rather overestimated. The stress intensity factor is computed by the influence function method, and it is shown that the factor is decreased by the residual stress in shot peened gear tooth. The shot peening is fairly effective to the reduction of fatigue crack growth rate. The crack propagation is simulated and the resistance due to shot peening is quantitatively demonstrated and discussed.

• 유기물자원화
• /
• 제9권4호
• /
• pp.81-88
• /
• 2001

본 연구는 유기성 폐자원의 효율적인 처리 방법의 일환인 퇴비화를 이용하여 생산된 남은 음식물 퇴비(이하 음식물 퇴비)를 고추 재배지에 시용량 별로 처리한 후 작물 생육과 토양의 이화학성 변화에 미치는 영항을 평가하기 위해 수행되었다. 처리구는 무처리구, 대조구($20Mgha^{-1}$의 돈분 퇴비), 음식물퇴비를 20, 40, 60, $80Mgha^{-1}$을 시용한 처리구 등 모두 6 개를 두었으며 3 반복, 난괴법을 이용하였다. 토양 pH는 음식물 퇴비의 시용량이 많을수록 상승하는 경향이 컸으며, 전기 전도도를 비롯한 다른 토양 특성도 비슷한 경향을 보였다. 또한 음식물 퇴비 시용량이 많을수록 용적비중은 낮아지고 공극율은 증가하는 상관관계를 보였다. 작물생육은 퇴비 시용량이 많은 처리구에서 초기 생육이 저조하였으며 1차 생육조사에서 그 차이를 뚜렷하게 확인할 수 있었다. 고추의 생중량은 초기 생육에서 저해를 받은 처리구에서 특히 적었으며 음식물 퇴비의 $20Mgha^{-1}$처리구는 대조구에 비해 낮았지만 큰 차이는 크지 않았다. 음식물 퇴비의 수용성 유기성분과 염류에 의한 초기 생육부진과 고추 수확량 감소를 감안한다면 시용량은 $30Mgha^{-1}$을 초과하지 말아야 할 것으로 판단된다. 음식물 퇴비를 연용 시험을 통해 작물 생육과 토양에 미치는 영향을 평가하여 음식물 퇴비의 시용량을 설정하는 것이 바람직할 것으로 생각된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권4호
• /
• pp.426-435
• /
• 2005

The lightness of components required in automobile and machinery industries is requiring high strength of components. Therefore this requirement is accomplished as the process of shot-peening method that the compressive residual stress is made on the metal surface as one of various improvement methods. Special research is, therefore, needed about compressive residual stress on the metal surface in the process of shot-peening method. Therefore, in this paper the effect of compressive residual stress of spring steel(JISG SUP-9) by shot-peening on fatigue crack growth characteristics in environmental condition(temperature) and mechanical condition(shot velocity, stress ratio) was investigated with considering fracture mechanics. By using the methods mentioned above, the following conclusions have been drawn. (1) The fatigue crack growth rate(da/dN) of the shot-peened material was lower than that of the un-peened one. In high temperature range. fatigue crack growth rate decreased with increasing temperature range, while fatigue crack growth rate increased by decreasing temperature in low temperature. (2) Fatigue life shows more improvement in the shot-peened material than in the un-peened material. And compressive residual stress of surface on the shot-peen processed operate resistance force of fatigue crack propagation.

• Corrosion Science and Technology
• /
• 제17권4호
• /
• pp.176-182
• /
• 2018

Corrosion of the Cu alloy with 10wt% Ni in stagnant seawater with residual free chlorine was investigated. Despite that fact that Cu alloys are widely used for seawater applications due to their stubborn resistance to chloride attack, not much is known as to how the residual free chlorine in seawater affects corrosion of Cu and its alloys. In this work, immersion tests were conducted in the presence of different levels of chlorine for 90-10 Cu-Ni samples, one of the most frequently used Cu alloys for seawater application, mostly in shipbuilding. The results revealed no evidence for accelerated corrosion of the Cu-Ni alloy even in the presence of 5 ppm residual chlorine in seawater, signifying that the Cu-Ni alloy can be more tolerant to residual chlorine that has been commonly cited by the shipbuilding industry. However, comparison of polarization behavior of the alloy samples in the presence of different electrolytes with different concentrations of residual chlorine suggests that higher concentration of chlorine could increase the corrosion rate of the Cu-Ni alloy. Furthermore, it is suggested that microorganisms in the seawater could increase the corrosion rate of the Cu-Ni alloy by encouraging exfoliation of the corrosion product off the metal surface.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.603-608
• /
• 2001

Recently, cold expansion of fastener holes is commonly used in the aerospace industry to increase the fatigue endurance of airframes. Cold expansion process is used as the retardation of crack initiation in the hole. This treatment leads to an improvement of fatigue behavior due to the compressive residual stresses developed on the hole surface. The residual stress profile depends on the cold expansion ratio. In the present paper, it is shown that residual stress is redistributed due to the application of cold expansion process for CT specimen. It is further shown that residual stress increases in proportion to cold expansion ratio. It is thought that crack growth rate increases as cold expansion ratio.

• 한국ITS학회 논문지
• /
• 제21권4호
• /
• pp.1-17
• /
• 2022

우리나라 교통사고 사망자 중 보행 중 사망자가 높은 비율을 차지하고 있으며, 정책적으로 보행안전에 대한 관심이 높아지고 있다. 특히, 보행자 교통사고가 많이 발생하는 신호교차로에서 보행환경 개선을 위하여 다양한 보행자 중심의 교통신호 운영기법 개발이 필요한 시점이다. 이에 본 연구에서는 잔류보행 기반 시간대별 보행신호 운영기법을 연구하였다. 본 연구에서는 보행수요와 잔류보행자가 증가하는 시간대에 한해서 보행신호시간을 더 늘려서 운영하는 잔류보행기반 시간대별 보행신호 운영기법을 현장에 적용하였으며, 제안한 보행신호 운영기법 적용에 따른 안전성의 차이를 통계적으로 분석하였다. 분석 결과, 현시 단위 잔류보행자율은 적용 전 20%(3.3명), 적용 후 8%(1.4명)으로 감소하였으며, 적색신호 시 횡단보도 내 잔류하는 잔류보행자율이 12%(1.9명) 감소하고, 그리고 잔류보행자의 위치는 적용 전 5.2m에서 적용 후 1.9m로 3.3m 감소하는 것으로 분석되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.179-182
• /
• 2004

ZnO varistor for transmission class arrester$({\Phi}65{\times}20mm)$ of 10kA(Class 3) grade was recently developed in korea and is tested for the properties by switching surge operating duty test to know the line discharge class and complex surge property in electric properties. To find out changing rate of residual voltage before and after lightning impulse residual voltage testing, the sample is cool to room temperature after finishing switching surge operating duty test, and the rate is good as 1.0~1.7%. The element had been considered as applicable ZnO varistor for electricity transmission from the test results of state conterl, switching surge operating duty, thermal stability and above test. But various test should be required for actual application because this is a part of the to be needed for application.

• 자원ㆍ환경경제연구
• /
• 제9권3호
• /
• pp.489-513
• /
• 2000

This paper introduces a new method to estimate and decompose sources of carbon dioxide emissions using an input-output model with decomposition method free of residual usually associated with this kind of analysis. This method is different from others, using what we call 'mean rate-of-change index (MRCI)' for weights of the decomposed terms. Ang et al.(1998) asserted that logarithmic mean divisia index(LMDI) is superior to Laspeyres index(LI) or simple average divisia index(SADI) since it reduces residual to zero. We claim that our method is an improvement over the other methods because it enables residual free decomposition even when data contain negative values, the case which LMDI cannot handle. We demonstrate by way of showing some examples that our method is superior to LI, SADI(Proops, 1993 and Chung, 1998) or LMDI(Ang et al., 1998).