• 설비공학논문집
• /
• 제14권7호
• /
• pp.607-616
• /
• 2002

This study has been conducted to evaluate the applicability of the control method in the dehumidification-integrated radiant floor cooling system in terms of stability of the room air temperature and the control variables through experiments. To do this, the relationship between the control variables in preventing floor surface condensation is first analyzed and the control method is predetermined through simulations. The results are as follows. First, it is necessary to determine the operation status of the dehumidification system according to the relationship between floor surface temperature and dew point temperature in the conditioned space. Second, outdoor reset with indoor temperature feedback control is better than on/off bang-bang control with respect to temperature stability in controlling the room air temperature and the possibility of energy savings. Finally, the humidity sensor can be located with the current thermostat in that there are small differences in absolute humidity in vertical distribution.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2775-2781
• /
• 2011

Urban Transit Train Radio is Radio Communication system that is used official business as leading motive for train safety running among the train crew and the central control center and drive-caring-chamber on main line and branch line. This system is operated that organizes talking path on handset of terminal after the train crew receives audio and understands call voice on speaker of terminal at calling the train of the central control center. When the central control center calls the specific train uses all call radio form, the train crew doesn't recognize the call cause the train situation, noise and action as train control. So there is a delay response cause reset call at the central control center. This research discusses the management of subway radio system and describes the call the train system that recognize train call number of all-call used between the central control center and the train crew.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.54-57
• /
• 2003

A new non linear, mean value, instantaneous following control technique to design half bridge converter is proposed in witch control principle uses characteristic that reset time of analog integrator is inverse proportion In input voltage. It is Important characteristic that compensation and follow-up control time are same with switching frequency. Is completed in one cycle that base control frequency. Have excellence characteristic that follow in order instruction value exactly stationary state as well as transient state. Half bridge converter that apply this control principle can know that have stabilize and excellence characteristic. This technique is verified through an experiment, and know that experiment result and theory agree well.

• 한국태양에너지학회 논문집
• /
• 제35권1호
• /
• pp.45-52
• /
• 2015

The government is fostering a renewable energy industry as an alternative to handle the energy crisis. Among the renewable energy systems available, geothermal energy is being highlighted as being highly efficient and safely operable without the effect of outdoor air. Accordingly, a study on the geothermal heat pump is in progress in various worldwide perspective. However, Geothermal energy is only in charge of part load of the building due to the high initial installation cost in korea. Moreover, its efficiency is reduced due to the use of independent existing heat sources. In this study, after selecting the building containing the actual installed geothermal heat pump, the use of excellent geothermal heat pump systems was maximized in terms of the energy efficiency. The objective of this study is to show the operation method of geothermal heat pump system to improve energy efficiency through the TRNSYS simulation. This paper proposed operation methods of geothermal heat pump control according to outdoor air temperature. The result of this study is that existing operation method had some problems and if offered improvement is applied to real condition, energy consumption would be decreased.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.978-983
• /
• 2003

In this paper, we propose a fault detection method for extended Kalman filter in decentralized filter structure. To detect a fault, a consistency between filter output and a monitoring signal is tested. State propagators are used to obtain the monitoring signal. However, the output of state propagator increases in magnitude and finally diverges as time runs. To solve such problem, two-propagator method was proposed for linear system. Two propagators are reset by Kalman filter output, alternatively, to avoid divergence. But a test statistics change abruptly at the reset instant in that method. Hence a N-step propagator method is proposed to fix up the problem. In the N-step propagator, only time propagations are performed from k-N+1 step to k step without measurement updates. A test statistics are defined by errors and its covariance between extended Kalman filter and N-step propagator. These fault detection methods are applied to integrated strapdown inertial navigation system (SDINS). By computer simulation, it is shown that the proposed methods detect a fault effectively.

• 조명전기설비학회논문지
• /
• 제17권6호
• /
• pp.39-46
• /
• 2003

본 논문에서는 디지털화 경향에 맞추어 변압기를 보호함과 아울러 감시 및 계측 등의 기능을 갖춘 변압기용 디지털 보호계전기를 개발하기 위한 하드웨어 및 실시간 처리가 가능한 소프트웨어의 구현 방법 등을 제시하였다. 특히 보호계전기의 모든 알고리즘 및 보조 프로그램들이 단일 프로세서에 의해 실시간으로 수행될 수 있도록 DSP의 DMA 제어기를 이용하여 아날로그 입력 데이터를 처리하였다. 아울러 비휘발성 메모리 (EEPROM, flash memory)에 보호계전 알고리즘의 수행에 필요한 각종 설정치, 이벤트 및 고장데이터를 저장하고 UART를 이용하여 데이터를 분석할 수 있도록 하였다. 그리고 시험용 변압기용 디지털 보호계전기를 제작하여 일본 NF 사의 보호계전기 시험기를 이용하여 변압기 보호기능 및 동작특성을 시험하여 그 성능을 입증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.63-63
• /
• 2000

This paper is about the method to improve the IDGPS system using receiver which is not aligned to GPS time. Transmitted data between server and user is constructed in PDDM of IS-801 rule. Pseudorange is overflowed in case of using receiver unaligned GPS time. And satellite position is miscalculated because earth rotating effect is not corrected. To solve this problem, when Pseudorange measurement is over the maximum range, the Pseudorange measurement is reset. And after the rough user position and transmit time is calculated, the precise Pseudorange measurement is calculated.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.229-234
• /
• 1992

This paper presents a compensator design method for multivariable feedback control systems with saturating actuators based on the concept of the equilibrium point. Am explicit expression for the compensation matrix of the general anti-reset windup(ARW) scheme is derived by minimizing the distances between the equilibrium points. The resulting dynamics of the compensated controller exhibits the reduced model form of the unsaturated system which can be obtained by the singular perturbational method. The proposed method is applicable to any open-loop stable plants with saturating actuators whose controllers are determined by some design technique. An example is given to show the effectiveness of the proposed method.

• 설비공학논문집
• /
• 제25권12호
• /
• pp.685-692
• /
• 2013

In this study, the control characteristics and effects of heating control methods on the heating performance and energy consumption of a hot-water heating control system of a residential apartment were researched by simulation and experiment. The purpose of this study is to evaluate operational strategies for improving an indoor thermal environment and reducing f energy consumption in the radiant floor heating system of a residential apartment.

• 전력전자학회논문지
• /
• 제22권3호
• /
• pp.270-275
• /
• 2017

This paper proposes a double-phase-locked-loop (PLL) to improve the performance of position estimation in hall sensor-based permanent magnet synchronous motor control. In hall sensor-based control, a PLL is normally used to estimate the rotor position. The proposed Double-PLL consists of two PLLs, including a reset type integrator. The motor control is more accurate and has better performance than conventional PLL, such as a small estimated position ripple. The validity of the proposed algorithm is verified by simulations and experiments.