• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1161-1164
• /
• 2003

We have developed an optimization algorithm based formulation for performing efficient time driven simultaneous place and route for FPGAs. Field programmable gate array(FPGAs) provide of drastically reducing the turn-around time for digital ICs, with a relatively small degradation in performance. For a variety of application specific integrated circuit application, where time-to-market is most critical and the performance requirement do not mandate a custom or semicustom approach, FPGAs are an increasingly popular alternative. This has prompted a substantial amount of specialized synthesis and layout research focused on maximizing density, minimizing delay, and minimizing design time.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.946-949
• /
• 1999

In this research we have developed a reliable, effective and feasible HEI(High-Energy Ion Implantation) process 3D-simulation tool, and then by using it we can predict and analyze the effect of HEI process on characteristics of the standard CMOS device. high-energy ion implantation above 200 keV is inevitable process to form retrograde well and buried layer to prevent leakage current, to conduct field implant for field isolation, and to perform after-gate implantation. The feasible analysis tool is a product of the HEI process modeling verified by comparison of the SIMS experiments with the simulation results. Especially, in this paper, we present the predicting capability of HEI-induced impurity and damage profiles compared with the published SIMS data in order to acquire the reliability of our results ranging from few keV to several MeV for phosphorus and boron implantation.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.8
• /
• pp.115-121
• /
• 1997

The in-process detection of the tool wear is one of the most important technologies in completely auto- matic operation of machine tool. In this research, using the tools having flank wear, the dynamic compo- nent of cutting forces is considered to be available for identifying the cutting process. In order to investi- gate this relation in detail, the cutting forces in turning of workpiece made of aluminum were measured by dynamometer of piezoelectric type, and the dynamic components of cutting force were analyzed. The fre- quency analysis, probability density analysis and RMS analysis of the dynamic components were carried out independently. Through the experiments, the characteristics of the tool system have a large effect on the dynamic component of cutting forces. As a result, it is shown that the dynamic cutting force was able to detect flank wear accurately.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.6 no.1
• /
• pp.41-48
• /
• 2006

The research which it led and it tried to observe the layout of Hwa-Um buddhist architecture by Avatamska sutra. The avatamska sutra is one of the scriptures which are important from Buddhism and Hwa-Um buddhist architecture is same channel. Sip-ji-pum that it includes the contents of avatamska sutra is most important. Hwa-um buddhist architecture can divide the major space into a three precinct. First, the gate to a Buddhist temple(A step of self interest. Second, Ru and a building for Buddhist priest(A step of Altruistic act). Third, A Buddhist sancturary(A step of Religious ascetic). From the above results, we can know that site layout of Hwa-um buddhist architecture in the Hwa-um sect relations to the dogmatic background, thought.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.1
• /
• pp.54-59
• /
• 2002

In the three-axis control of satellites by using on-board actuators, gyros are usually used to measure the attitude angles and angular rates. The gyros are operated by electronic parts and mechanical actuators. The digital components of the electronic parts consist of largely FPGA (Field Programmable Gate Array) as one of the methods for VLSI(Very Large Scale Integrated) circuit design, while the mechanical parts provide output signal directly by mechanical actuation of a spinning rotor. In this research, a mixed mode of gyro is implemented in FGA. In addition to the hardware implementation, the simulation study was conducted by using the SABER for the mixed mode simulator. Results for the practical implementation of the satellite ACS (Attitude Control System) interfaced with the data processing are also presented to validate the FPGA implementation.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.585-589
• /
• 2018

Consumer demand for high quality image/video services led to growing trend in image quality enhancement study. Therefore, recent years was a period of substantial progress in this research field. Through careful observation of the image quality after processing by image enhancement algorithms, we perceived that the dark region in the image usually suffered loss of contrast to a certain extent. In this paper, the low-light stretch preprocessing algorithm is, hence, proposed to resolve the aforementioned issue. The proposed approach is evaluated qualitatively and quantitatively against the well-known histogram equalization and Photoshop curve adjustment. The evaluation results validate the efficiency and superiority of the low-light stretch over the benchmarking methods. In addition, we also propose the 255MHz-capable hardware implementation to ease the process of incorporating low-light stretch into real-time imaging systems, such as aerial surveillance and monitoring with drones and driving aiding systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.30-30
• /
• 2000

In the three axis control of satellite by using reaction wheel and gyro, a Gyro carries out measuring of the attitude angie and the attitude angular velocity. The Gyro is operated by the electronic part and the mechanic actuator. The digital part of the electronic part is consisted of the FPGA (Field Programmable Gate Array), which is one of the methods for designing VLSI (Very Large Scale Integrated Circuit), and the mechanic actuator processes the input/output data by the dynamic model. In the research of the mixed mode of Gyro, the simulation is accomplished by SABER of the mixed mode simulator and the results for the practical implementation of the satellite ACS (Attitude Control System) interfaced with the data processing are proposed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.06a
• /
• pp.135-147
• /
• 1997

The production of light metal parts using aluminum is mainly performed by die casting and squeeze casting, which directly fabricate the required shape from the liquid state. However, die casting is subject to defects such as shrinkage porosity and air trapped when molten metal enters the cavity, whilst squeeze casting also has defects due to turbulent flow in the die cavity. Both diecasting and sqeeze casting have inhomogeneous mechanical property in terms of dendritic structure during solidification. Active research has been carried out on semi-solid processing, rather than on conventional process methods such as die casting, which involve various problems. Therefore in this paper, to introduce the fundamental technology for d e design, in die casting and forging process with semi-solid materials, relationship between stress and strain of semi-solid materials, and for producing parts die design has been proposed as parameters of globulization of the microstructure and gate shape. The prevention of various defects to produce sound parts are also introduced.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.242-246
• /
• 2008

The culture property which is designated with the domestic national treasure and the treasure does not manage protection or preservation as value of culture property of national form. South Gate which is a national treasure class culture property (Soong le) put on the large calamity which is lost with this fire. This thesis intends to understand the aspects of security danger from the research on actual condition of safety supervision department in cultural properties of Korea and propose security plans against disasters to cultural properties through the comparative study with Japan which is advanced nation of culture property prevention of disaster.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.197-200
• /
• 2008

현재 국내.외의 디스플레이 산업에서의 경쟁력은 사용자의 요구에 부응하는 제품을 얼마나 적시에 적절한 가격으로 출시하는가에 달려있다. 또한 국외, 특히 중국과 대만의 거센 추격을 받을 뿐만 아니라 시장조사기관에서는 지속적인 가격하락을 예상하고 있다. 이를 극복하고 국내업체가 세계시장에서 경쟁력을 확보하기 위해서는 수율의 극대화가 필수적이다. 따라서 본 연구개발에서는 정해진 환경에서 최대의 불량검출 능력을 발휘할 수 있도록 공정을 개선하기 위하여 Full Gate Visual 테스트에 필수적인 FGV 패턴발생 장치와 공정제어 장치를 개발하였다.