• Fashion & Textile Research Journal
• /
• v.9 no.4
• /
• pp.391-400
• /
• 2007

This purpose of this study is to announce the research for the formative characteristics and the constructive characteristics for the 23 pair of pants excavated from the tomb of Yeosan Song's family at Mokdal Dong in Daejeon. Men and women wore the open-type over the close-type pants. Song Hyo-sang and Chungjoo Park wore the 1 or 2 pairs of the open-type pants over the 3 pairs of close-type pants. Song Hee-jong and his wife Sonhung An wore a pair of the open-style pants over the 1 or 2 pairs of pants. It was due to the shortage of goods by the war that Song Heejong had less shrouds than Song Hyosang. The pants were almost made of the cotton and the silk. The open-type pants worn inside was made of the cotton but outside was made of the silk. That time the cotton was used for the unlined underwears for the health and the protection against the cold and the hot. The silk was used for the outwear. In the construction type, 12 pairs of pants were unlined, 6 pairs of pants were quilted, 4 pairs of pants were padded, and 1 pair of pants was lined. All unlined were the close-type and the quilted and padded pants were the open-type, which were worn inside. Lined type was just one. In the wearing order of shrouds, type, textile, and constructive type, Song Hyosang and Chungjo Park were similar, Song Heejong and Sonhung An were similar.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.2
• /
• pp.183-192
• /
• 2004

The effect of eight varieties of grain and forage type whole crop rice (Oryza sativa L Japonica) each harvested at four stages of maturity were investigated for morphology and yield, proportion of botanical fractions, fermentatability and chemical composition in an $8{\times}4$ factorial experiment. All crops were sown in 1997 at Saitama Prefecture, Japan under identical condition and harvested on 10, 22, 34 and 45 days after flowering in 1998. Total DM yield of forage type varieties was similar to that of the highest yield of grain type varieties. However, while yield of forage type varieties was attributed to higher proportion of straw than head, the reverse was in the case of grain type varieties. Yield in line with the proportion of head increased (p<0.001), but in contrast proportion of straw decreased (p<0.001) with the increase in maturity. Silage fermentability of grain type varieties was better than forage type varieties. Fermentability improved with the increase (p<0.001) in maturity suggesting that the moisture content should be reduced to improve fermentation quality. Forage type varieties contained higher (p<0.001) ash, crude fat (EE), organic cell wall (OCW) and acid detergent fiber (ADF), but contained lower crude protein (CP), organic cell content (OCC), CP in OCC and nitrogen-free cell wall extract (NCWFE) than the grain type varieties. The ash, CP, EE, Oa (60% digestible OCW), Ob (40% digestible OCW), OCW, ADF and acid detergent lignin (ADL) decreased (p<0.001), but OCC and NCWFE increased (p<0.001) with the increase in maturity. It is concluded that stage of maturity not only increases yield and proportion of head, but also improved the fermentation quality and increases quality chemical composition (except CP) of whole crop rice. Forage type varieties may be as good as grain type varieties in terms of yield, but fermentation quality and chemical composition may not be as good as that of grain type varieties.

• Analytical Science and Technology
• /
• v.17 no.5
• /
• pp.416-422
• /
• 2004

Time-resolved laser induced breakdown spectroscopy (TRELIBS) has been developed and applied to the qualitative analysis of the component materials of nuclear power plant. The alloy samples used in this work were carbon steels (A106 Gr. B; A336 P11; A335 P22), stainless steels (type 304; type 316) and inconel alloys (Inconel 600; Inconel 690; Inconel 800). Carbon steels can be individually distinguished by the intensity ratio of chromium to iron and molybdenum to iron emission lines observed at the wavelength raging from 485 to 575 nm. Type 316 stainless steel can be easily differentiated from type 304 by identification of the molybdenum emission lines at an emission wavelength ranging from 485 to 575 nm: type 304 does not give any molybdenum emission lines, but type 316 does. The inconel alloys can be individually distinguished by the intensity ratio of Cr/Fe and Ni/Fe emission lines at the wavelength raging from 420 to 510 nm. TRELIBS has been proved to be a powerful analytical technique for direct analysis of alloys due to its non-destructivity and simplicity.

• Progress in Superconductivity
• /
• v.3 no.2
• /
• pp.235-240
• /
• 2002

In this paper, we investigated the current limiting characteristic in the magnetic shielding type fault current limiter(MSFCL). The circuit analysis was executed by using finite differential method(FDM). This paper suggests that the current limiting performance can be achieved in two ways (resistive and inductive one), according to design parameter. By comparing current limiting characteristics in two ways and surveying the important parameters which determine the operational way after fault occurs in the design of MSFCL, it is shown that the magnetic shielding type fault current limiter can be operated in either resistive or inductive way.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.3
• /
• pp.11-46
• /
• 1996

The objectives of this research paper are to identify the types of the firm's new product development strategy and their characteristics about business strategy, to examine the effect of each type on new product outcomes, and to explore the contingency variable influencing the relationship between these types and new product outcomes. The result of the research are summarized as follows : First, in terms of both the resource allocation for product innovativeness and technology acquisition method, this study suggests 9 types of the firm's new product development strategies- Type 1 (pursuing low innovative products/relying on external technology), Type 2 (pursuing low innovative products oriented/relying on internal technology), Type 3 (pursuing low innovative products/relying on mixed technology), Type 4 (pursuing high innovative products/relying on internal technology), Type 6(pursuing high innovative products /relying on mixed technology), Type 7 (balancing low and high innovative products/relying on external technology), Type 8 (balancing low and high innovative products/relying on internal technology), Type 9 (balancing low and high innovative products/relying on mixed technology). Second, these 9 types are deeply associated with the firm's business strategic variables such as product differentiation and market differentiation, and exhibit different level of both technical and commercial performance of new products. Finally, the effects of these types on new product outcomes are different according to industrial environment and firms' characteristics with respect to size and technological capability.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.288-293
• /
• 2015

PURPOSE. The aim of this study was to evaluate the effect of cyclic loading and screw retightening on reverse torque value (RTV) in external and internal type implants. MATERIALS AND METHODS. Cement-retained abutments were connected with 30 Ncm torque to external and internal type implants. Experimental groups were classified according to implant connection type and retightening/loading protocol. In groups with no retightening, RTV was evaluated after cyclic loading for 100,000 cycles. In groups with retightening, RTV was measured after 3, 10, 100 cycles as well as every 20,000 cycles until 100,000 cycles of loading. RESULTS. Every group showed decreased RTV after cyclic loading. Before and after cyclic loading, external type implants had significantly higher RTVs than internal type implants. In external type implants, retightening did not affect the decrease in RTV. In contrast, retightening 5 times and retightening after 10 cycles of dynamic loading was effective for maintaining RTV in internal type implants. CONCLUSION. Retightening of screws is more effective in internal type implants than external type implants. Retightening of screws is recommended in the early stage of functional loading.

• Journal of Drive and Control
• /
• v.9 no.4
• /
• pp.14-18
• /
• 2012

Two kinds of piezoelectric actuator are applied to the valve for controlling the direction, the flow and the pressure of the fluid. One is a stack type piezoelectric actuator which has very fast response characteristics but very tiny displacement. The other is a bender type piezoelectric actuator which has also fast response characteristics but lower than the stack type one, and has longer displacement than the stack type one. So, the bender type piezoelectric actuator has advantage to apply to the valve for controlling a large amount of flow and fast on-off operating. In this study, the bender type piezoelectric pneumatic valve for color sorter is designed and fabricated. The new type high speed piezo valve with the both side supporting mechanism for high operating frequency and high reliability is discussed for separating the foreign body from the grains. Finally, the performance characteristics of a fabricated valve are analyzed and the frequency characteristics are also discussed for substituting the conventional type solenoid actuator.

• Korean Institute of Interior Design Journal
• /
• v.21 no.5
• /
• pp.65-76
• /
• 2012

The purpose of this study is to grasp the spatial characteristics and consciousness structure for The Third Place through the empirical research, focused on housewives as the survey who spend many times in neighborhood. The four types as the consciousness structure are deducted, Nature-oriented type, Unusual experience type, Solitude enjoyment type, and Originality-oriented type. And the spatial characteristics related to the four types are deducted as the followings: Nature-oriented type contains the spatial characteristics as Wild space, Speculative space, Dotty occupation space, and Green way. Unusual experience type contains as Rambling space, Dynamic sojourn space, and Theme-plex space. Solitude enjoyment type contains as Anonymous private space, Encircling space, and Religious space. Originality-oriented type contains as Chatter space, Self development space, and Community space between families. The results of this study represent six characteristics on the third place, advocated by Oldenburg, and show housewives' various needs and concrete examples for the Third place in city.

• Fashion & Textile Research Journal
• /
• v.20 no.5
• /
• pp.569-582
• /
• 2018

The purpose of this study is to verify the impact protection performance and to evaluate the activity, design, fit, and pad characteristics of the fall impact protection clothing for elderly women. The protective clothing was designed as pants type and underwear type, and an impact protection pad in the form of a tightly connected regular hexagon piece was inserted in the hip and hip joints. The pad was made of two kinds of foam single pad and foam and gel combination pad so that they could be inserted into pants type and underwear type, respectively. The results of the shock absorption performance of the fall impact protective clothing showed that when the impact force of 4601N was applied to the pants type protective clothing, the impact force was reduced by 29% in the foam pad type and 26% in the gel and foam pad type. When the force of 5113N was applied to the underwear type, it decreased by 40% in the foam pad type and by 34% in the gel and foam pad type. As a result of wearing evaluation of subject group, it was found that fit and activity of underwear type was better than that of pants type. Foam pad type was evaluated to be lighter than gel and foam pad type in both the subject and the expert group and the gel and foam pad was evaluated to be more flexible in the expert group.

• Journal of Environmental Science International
• /
• v.22 no.4
• /
• pp.443-451
• /
• 2013

Spring rainfall events were comprehensively analyzed based on the distribution of precipitation amount and the related synoptic weather between 2008~2012. Forty-eight cases are selected among the rain events of the entire country, and each distribution of the 24-hour accumulated precipitation amount is classified into three types: evenly distributed rain(Type 1), more rain in the southern area and south coast region (Type 2), and more rain in the central region (Type 3), respectively. Type 1 constitutes the largest part(35 cases, 72.9%) with mean precipitation amount of 19.4 mm, and the 17 cases of Type 1 are observed in March. Although Type B and C constitutes small parts (11 cases, 22.9% and 2 cases, 4.2%), respectively. The precipitation amount of these types is greater than 34.5 mm and occurred usually in April. The main synoptic weather patterns affecting precipitation distribution are classified into five patterns according to the pathway of low pressures. The most influential pattern is type 4, and this usually occurs in March, April, and May (Low pressures from the north and the ones from the west and south consecutively affect South Korea, 37.5%). The pattern 3(Low pressures from the south affect South Korea, 25%) happens mostly in April, and the average precipitation is usually greater than 30 mm. This value is relatively higher than the values in any other patterns.