• Journal of Welding and Joining
• /
• v.32 no.6
• /
• pp.75-81
• /
• 2014

Usage of heavy metal element (Pb, Hg and Cd etc.) in electronic devices have been restricted due to the environmental banning of the European Union, such as WEEE and RoHS. Therefore, it is needed to develop the Pb-free solder plated ribbon in photovoltaic (PV) module. This study described that degradation characteristics of PV module under damp heat (DH, $85^{\circ}C$ and 85% R.H.) condition test for 1,000 h. Solar cell ribbons were utilized to hot dipping plate with Pb-free solder alloys. Two types of Pb-free solder plated ribbons, Sn-3.0Ag-0.5Cu (SAC305) and Sn-48Bi-2Ag, and an electroless Sn-40Pb solder hot dipping plated ribbon as a reference sample were prepared to evaluate degradation characteristics. To detect the degradation of PV module with the eutectic and Pb-free solder plated ribbons, I-V curve, electro-luminescence (EL) and cross-sectional SEM analysis were carried out. DH test results show that the reason of maximum power (Pm) drop was mainly due to the decrease fill factor (FF). It was attributed to the crack or oxidation of interface between the cell and the ribbon. Among PV modules with the eutectic and Pb-free solder plated ribbon, the PV module with SAC305 ribbon relatively showed higher stability after DH test than the case of PV module with Sn-40Pb and Sn-48Bi-2Ag solder plated ribbons.

• The Korean Journal of Pain
• /
• v.13 no.2
• /
• pp.149-155
• /
• 2000

Background: Pulsed radiofrequency (RF) lesioning is a painless procedure and causes no neurodestruction and neuritis-like reaction are common following conventional RF lesioning. There is little data about the effect of pulsed RF especially with regard to its suitability for the treatment of acute pain. The possibility of a placebo effect cannot be ruled out because a double-blind study was not performed in previous studies. There is also no neuropathologic study about pulsed RF. Methods: The rats were anesthetized with sodium pentobarbital (40 mg/kg, i.p.; supplemented as necessary). The common sciatic nerve was exposed by blunt dissection through biceps femoris. Pulsed RF was administered to the common sciatic nerve using a 30 ms/s pulse with for 120 seconds. The temperature reached was no more than $42^{\circ}C$. Analgesia was determined using hot-plate assay shortly and, 3 days and 1 week before, and 2 weeks after operation. Lesions were examined with LM (light microscope) and EM (electron microscope) 2 weeks later. Results: There were no differences in response latencies between the control and experimental group. There were many vacuoles with hyaline bodies in the Schwann cell cytoplasm rather than axon in LM and larger electron dense bodies. No changes were found in the axon or unmyelinated fibers. Only small changes were found in the sheaths of myelinated fibers and Schwann cells. Conclusions: We therefore do think that any analgesic effect of pulsed RF is not a result of block of neural conduction. But rather than it can be attributed to others factors. It was also ineffective as a treatment for acute pain such as that caused by the hot-plate test.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.4
• /
• pp.211-219
• /
• 2006

The UET(ultrasound excited thermography) for the ,eat-time diagnostics of the object employs an infrared camera to image defects of the surface and subsurface which are locally heated using high-frequency putted ultrasonic excitation. The dissipation of high-power ultrasonic energy around the feces of the defects causes an increase In temperature. The defect's image appears as a hot spot (bright IR source) within a dark background field. The UET for nondestructive diagnostic and evaluation is based on the image analysis of the hot spot as a local response to ultrasonic excited heat deposition. In this paper the applicability of VET for fast imaging of defect is described. The ultrasonic energy is injected into the sample through a transducer in the vertical and horizontal directions respectively. The voltage applied to the transducer is measured by digital oscilloscope, and the waveform are compared. Measurements were performed on four kinds of materials: SUS fatigue crack specimen(thickness 14mm), PCB plate(1.8 mm), CFRP plate(3 mm) and Inconel 600 plate (1 mm). A high power ultrasonic energy with pulse durations of 250ms Is injected into the samples in the horizontal and vertical directions respectively The obtained experimental result reveals that the dissipation loss of the ultrasonic energy In the vertical injection is less than that in the horizontal direction. In the cafe or PCB, CFRP, the size of hot spot in the vortical injection if larger than that in horizontal direction. Duration time of the hot spot in the vertical direction is three times as long as that in the horizontal direction. In the case of Inconel 600 plate and SUS sample, the hot spot in the horizontal injection was detected faster than that in the vertical direction

• ETRI Journal
• /
• v.29 no.5
• /
• pp.667-669
• /
• 2007

This letter presents a smart integrated microfluidic device which can be applied to actively immobilize proteins on demand. The active component in the device is a temperature-controllable microelectrode array with a smart polymer film, poly(N-isopropylacrylamide) (PNIPAAm) which can be thermally switched between hydrophilic and hydrophobic states. It is integrated into a micro hot diaphragm having an integrated micro heater and temperature sensors on a 2-micrometer-thick silicon oxide/silicon nitride/silicon oxide (O/N/O) template. Only 36 mW is required to heat the large template area of 2 mm${\times}$16 mm to $40^{\circ}C$ within 1 second. To relay the stimulus-response activity to the microelectrode surface, the interface is modified with a smart polymer. For a model biomolecular affinity test, an anti-6-(2, 4-dinitrophenyl) aminohexanoic acid (DNP) antibody protein immobilization on the microelectrodes is demonstrated by fluorescence patterns.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.2
• /
• pp.203-212
• /
• 2010

Water spray cooling has been widely used in a variety of industrial applications. The present study concentrated on quantitative measurements of the heat flux and heat transfer coefficient by water spray as it impinges on the rough surface of a hot steel plate at $900^{\circ}C$. A novel experimental technique was developed for a hightemperature heat flux gauge with a test block, cartridge heaters, and thermocouples that was used to measure the surface heat flux information on the hot steel plate for local heat flux measurements. The roles of the surface roughness on heat transfer are presented in this paper for well-characterized four rough surfaces with average rms roughness heights of $40-80{\mu}M$. The results show that the local heat transfer for rough surfaces is higher than that for a smooth surface. Heat transfer can be significantly increased by the presence of surface roughness elements, which can disrupt the thin thermal boundary layer. In addition, the heat transfer enhancement mechanism on a rough surface can be investigated by a different boiling regime.

• Tribology and Lubricants
• /
• v.38 no.3
• /
• pp.93-100
• /
• 2022

Micro-light emitting diode (micro-LED) displays offer numerous advantages such as high brightness, fast response, and low power consumption. Hence, they are spotlighted as the next-generation display. However, defective LEDs may be created due to non-uniform contact loads or LED alignment errors. Therefore, a repair process involving the replacement of defective LEDs with favorable ones is necessitated. The general repair process involves the removal of defective micro-LEDs, interconnection material transfer, as well as new micro-LED transfer and bonding. However, micro-LEDs are difficult to repair since their size decreases to a few tens of micron in width and less than 10 ㎛ in thickness. The conventional nozzle-type dispenser for fluxes and the conventional vacuum chuck for LEDs are not applicable to the micro-LED repair process. In this study, transfer conditions are determined using a micro stamp for repairing micro-LEDs. Results show that the aging time should be set to within 60 min, based on measuring the aging time of the flux. Additionally, the micro-LEDs are subjected to a compression test, and the result shows that they should be transferred under 18.4 MPa. Finally, the I-V curves of micro-LEDs processed by the laser and hot plate reflows are measured to compare the electrical properties of the micro-LEDs based on the reflow methods. It was confirmed that the micro-LEDs processed by the laser reflow show similar electrical performance with that processed by the hot plate reflow. The results can provide guidance for the repair of micro-LEDs using micro stamps.

• The Korean Journal of Pain
• /
• v.37 no.3
• /
• pp.211-217
• /
• 2024

Background: Tolerance to the analgesic effects of opioids and non-steroidal anti-inflammatory drugs (NSAIDs) is a major concern for relieving pain. Thus, it is highly valuable to find new pharmacological strategies for prolonged therapeutic procedures. Biguanide-type drugs such as metformin (MET) are effective for neuroprotection and can be beneficial for addressing opioid tolerance in the treatment of chronic pain. It has been proposed that analgesic tolerance to NSAIDs is mediated by the endogenous opioid system. According to the cross-tolerance between NSAIDs, especially sodium salicylate (SS), and opiates, especially morphine, the objective of this study was to investigate whether MET administration can reduce tolerance to the anti-nociceptive effects of SS. Methods: Fifty-six male Wistar rats were used in this research (weight 200-250 g). For induction of tolerance, SS (300 mg/kg) was injected intraperitoneally for 7 days. During the examination period, animals received MET at doses of 50, 75, or 100 mg/kg for 7 days to evaluate the development of tolerance to the analgesic effect of SS. The hot plate test was used to evaluate the drugs' anti-nociceptive properties. Results: Salicylate injection significantly increased hot plate latency as compared to the control group, but the total analgesic effect of co-treatment with SS + Met50 was stronger than the SS group. Furthermore, the effect of this combination undergoes less analgesic tolerance over time. Conclusions: It can be concluded that MET can reduce the analgesic tolerance that is induced by repeated intraperitoneal injections of SS in Wister rats.

• Biomedical Science Letters
• /
• v.14 no.2
• /
• pp.97-103
• /
• 2008

This study was conducted to investigate the effect of an anti-inflammatory and analgesic action of the glucosamine HCl (Glucosamine) and SH-1 (Glucosamine + Oriental herbal composition combined group). Male sprague-Dawley rats $(200{\sim}250g)$ and ICR mice $(20{\sim}30g)$ were randomized and these experimental groups were divided into 4 groups. Two control group were given as negative control (saline) and positive control (Ibuprofen, 100 mg/kg) and two groups given as oral administration of Glucosamine (320 m/kg) and SH-1. Carrageenan induced paw edema test, hot plate method, croton oil induced granuloma, capillary permeability test and acetic acid writhing syndrome were also shown to be comparable in the SH-1 group to anti-inflammatory drug group such as positive control group (Ibuprofen). Although further studies should be performed to confirm the effects of SH-1, present results suggest that the combined administration of SH-1 have potential action in anti-inflammatory and analgesic action. It could be applicable for the improvement of arthritic symptoms as a new diet-supplement.

• Advances in Traditional Medicine
• /
• v.6 no.4
• /
• pp.349-354
• /
• 2006

In the present study, three Malaysian Channa spp. fish Channa striatus, Channa micropeltes and Channa lucius were assessed for their analgesic activity. Distilled water and mixture of chloroform: methanol were used for extraction. The analgesic or antinociceptive activity was investigated by abdominal writhing and hot plate test. The water extract of Channa striatus and the chloroform: methanol extract Channa lucius produced potent antinociceptive effect when assessed with the abdominal writhing test. The activity was compared to morphine where the activity of the extracts was less potent than the opioid. In the hote plate test, water extract of Channa striatus revealed significant activity and chloroform:methanol extract of Channa micropeltes had moderate activity. However, these activities were statistically lower than morphine. Collectively, this study also showed that Channa striatus extract was more potent analgesic agent when compared to the other closely related snakehead Channa micropeltes and Channa lucius.

• Biomolecules & Therapeutics
• /
• v.21 no.5
• /
• pp.391-397
• /
• 2013

In the present study, we aimed to analyze the antinociceptive, immunomodulatory and antipyretic activities of nymphayol were investigated in wistar rats and mice. Antinociceptive effect was evaluated by acetic acid induced writhing, formalin induced paw licking and hot-plate tests. Immunomodulatory activity was assessed by neutrophil adhesion test, humoral response to sheep red blood cells, delayed-type hypersensitivity, phagocytic activity and cyclophosphamide induced myelosuppression. Antipyretic activity was evaluated by yeast induced hyperthermia in rats. Nymphayol produced significant (p<0.05) antinociceptive activity in acetic acid induced writhing response and late phase of the formalin induced paw licking response. Pre-treatment with nymphayol (50 mg/kg, oral) evoked a significant increase in neutrophil adhesion to nylon fibres. The augmentation of humoral immune response to sheep red blood cells by nymphayol (50 mg/kg) was evidenced by increase in antibody titres in rats. Oral administration of nymphayol (50 mg/kg) to rats potentiated the delayed-type hypersensitivity reaction induced by sheep red blood cells. Treatment with nymphayol showed a significant (p<0.05) reduction in pyrexia in rats. The results suggest that nymphayol possesses potent anti-nociceptive, immunomodulatory and antipyretic activities.