References
- Mizikar, I., 1970, "Spray Cooling Investigation for Continuous Casting of Billets and Blooms," Iron and Steel Engineer, pp. 53-70.
- Hoogendoorn, C. J. and den Hond, R., 1974, "Leidenfrost Temperature and Heat Transfer Coefficients for Water Sprays Impinging on a Hot Surface," Proceedings of 5th International Heat Transfer Conference, Vol. 4, pp. 135-138.
- Bolle, L. and Moureau, J. C., 1982, "Spray Cooling of Hot Surfaces," Multiphase Science and Technology, Vol. 1, pp. 1-97. https://doi.org/10.1615/MultScienTechn.v1.i1-4.10
- Pais, M. R., Chow, L. C. and Mahefkey, E. T., 1992, "Surface Roughness and Its Effects on the Heat Transfer Mechanism in Spray Cooling," Journal of Heat Transfer, Vol. 114, pp. 211-219. https://doi.org/10.1115/1.2911248
- Kang, B-S. and Choi, K-J., 1998, "Cooling of a Heated Surface with an Impinging Water Spray," KSME International Journal, Vol. 12, pp. 734-740. https://doi.org/10.1007/BF02945735
- Chen, S-J. and Tseng, A. A., 1992, "Spray and Jet Cooling in Steel Rolling," International Journal of Heat and Fluid Flow, Vol. 13, No. 4, pp. 358-369. https://doi.org/10.1016/0142-727X(92)90006-U
- Kalpakjian, S., 1985, Manufacturing Processes for Engineering Materials, Addison-Wesley Publishing Company, Inc., Reading, MA, pp. 180-194.
- Gabour, L. A. and Lienhard V, J. H., 1994, "Wall Roughness Effects on Stagnation-point Heat Transfer Beneath an Impinging Liquid Jet," Journal of Heat Transfer, Vol. 116, pp. 81-87. https://doi.org/10.1115/1.2910887
- Webb, R. L., 1981, "The Evolution of Enhanced Surface Geometries for Nucleate Boiling," Heat Transfer Engineering, Vol. 2, pp. 46-69. https://doi.org/10.1080/01457638108962760
- Webb, R. L., 1983, "Nucleate Boiling on Porous Coated Surfaces," Heat Transfer Engineering, Vol. 4, pp. 71-82. https://doi.org/10.1080/01457638108939610
- Wolf, D. H., Incropera, F. P. and Viskanta, R., 1993, "Jet Impingement Boiling," Advances in Heat Transfer, Vol. 23, pp. 1-132. https://doi.org/10.1080/10407789308913659
- Hatta, N., Kokado, J. and Hanasaki, K., 1983, "Numerical Analysis of Cooling Characteristics for Water Bar," Transaction of Iron and Steel Institute of Japan, Vol. 23, pp. 555-564. https://doi.org/10.2355/isijinternational1966.23.555
- Lee, J., 2008, Development in In-Line Heat Flux Curve of Accelerated Cooling Machine and its Application in Plate Mills, POSCO Technical Report 2008X017, Pohang, Korea, pp. 64-79.
- Beck, J. V., Blackwell, B. and St. Clair, Jr., C.R., 1985, Inverse Heat Conduction : Ill-posed Problems, A Wiley-Interscience, New York, pp. 108-217.
- Beck, J. V. and Arnold, K. J., 1977, Parameter Estimation in Engineering and Science, Wiley, New York.
- Taler, J., 1996, "Theory of Transient Experimental Techniques for Surface Heat Transfer," International Journal of Heat and Mass Transfer, Vol. 39, pp. 3733-3748. https://doi.org/10.1016/0017-9310(96)00015-4
- van Stralen, S. and Cole, R., 1979, Boiling Phenomena, McGraw-Hill, New York.
Cited by
- Effect of Water Temperature on Heat Transfer Characteristic of Spray Cooling on Hot Steel Plate vol.35, pp.5, 2011, https://doi.org/10.3795/KSME-B.2011.35.5.503