• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.1043-1046
• /
• 2000

인터넷 사용자 수가 급격히 증가되고 사용자들의 요구도 다양해짐에 따라 네트워크 자원의 물리적 증가뿐만 아니라 자원의 제한이라는 상태에서 더 적은 자원으로 만족할 만한 서비스를 제공할 수 있는 트래픽 엔지니어링 기술이 부각되고 있다. 트래픽 엔지니어링은 자원의 효율성을 최적화하는 동시에 네트워크의 성능을 최적화시킬 수 있는 기술로 비용이 많이 드는 대규모 망일수록 중요한 기술이기 때문에 네트워크 관련 사업자들에게 필수 요구사항이 되었다. 본 논문에서는 트래픽 엔지니어링 기술의 하나로 MPLS 망에서 경로에 이상이 발생하였을 때 빠른 데이터 전송 복구를 위한 경로 재설정 방법을 제안하였다. 전송 전 대체 경로를 미리 지정하고 주 경로와 대체 경로에 우선순위를 두어 대체 경로를 다른 트래픽에서도 사용할 수 있게 하여 자원 이용률을 높이고 재전송에 따른 지연 시간도 줄였다.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.535-542
• /
• 2002

This paper show communication network scheme problem for the railway is solved which were electrical noise and line break in wayside using rerouting communication line, Considering the availability and the maintainability based on the reliability in design of communication networks. At first, Self-Healing Ring algorithm is suggested in that solution which is satisfied with above requirements. And also, in the advanced type, Dual Master scheme is suggested that the problem which is occurred in line break of both main and sub line at the same time can be solved using DMSHR(Dual Master Self Healing Ring). Therefore total reliability in railway system is going to be advanced using DMSHR scheme.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.479-484
• /
• 2002

본 논문에서는 다중 사용자 간의 상호 작용과 공동 작업을 가능하게 하는 3차원 그래픽 기반의 가상 현실 시스템인 YVES(Yonsei Virtual Environment System) 의 성능향상을 위한 아바타 객체의 효과적인 동기화 방법에 대하여 제안하였다. YVES 는 연세대학교 컴퓨터과학과 멀티미디어 연구실에서 2001년도에 개발된 시스템이다. YVES의 사용자간 동기화 알고리즘은 기존의 방법에 비해 객체의 Poping현상을 없애고 동기화를 유지한 점에서 개선되었다고 할 수 있었다. 그러나 원래의 경로와는 변화된 다른 경로가 설정된다는 것과 이동이 완료되었을 때 수정된 경로로 향한 객체 진행 방향을 완료시점에서 원래의 진행방향으로 수정해야 항으로써 자연스럽지 못한 움직임을 보인다는 것이 문제점으로 지적되었다. 이를 보완하기 위해서 본 논문에서는 기존의 움직임 벡터를 새로 움직여야 할 움직임 벡터에 반영하여 새로운 경로가 원래의 경로와 보다 근접할 수 있도록 하고, 이동의 완료시점에서 객체가 향하는 방향이 원래 경로로 이동했을 경우와 동일하도록 하는 알고리즘을 제안하고, 각 알고리즘을 동일한 이동경로를 적용하여 비교하였다.

• Journal of Korean Foot and Ankle Society
• /
• v.24 no.4
• /
• pp.168-172
• /
• 2020

Chronic recurrent peroneal dislocation often responds poorly to conservative treatment. Surgical treatment has been reported to be more effective than conservative treatment, and various surgical treatment methods are available: superior peroneal retinaculum repair or reattachment, peroneal groove deepening procedures, rerouting procedures, or bone block procedures. Although various treatment options have been reported, there is no consensus regarding which treatment is better. This paper proposes a distal fibular rotational plasty that can prevent recurrent peroneal dislocations and recover its function well by securing a stable peroneal tendon excursion space.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.5
• /
• pp.232-242
• /
• 2002

In a MPLS(Multiprotocol Label Switching) network, it is important to reduce the number of labels and LSP(Lable Switched Path)s for network resource management. MTP(Multipoint-to-Point) LSP can be used to solve this problem. In consideration of traffic engineering, MTP LSP must be chosen to enhance the availability of network and link utilization. Also, a fast mechanism to setup MTP LSPs is required for rerouting capability against link failure. In this paper, we propose a fast MTP LSP traffic engineering of multipath MTP LSP by using a mapping of a MTP LSP upon Diffserv PHBs(Per Hop Behavior) in a Diffserv-capable MPLS network. In the proposed traffic engineering, we determine multiple MTP LSPs in a hierarchical manner according to the characteristics of different services. By using Monte-Carlo method for traffic load balancing process, it provides fast rerouting capability in case of frequent link failure across large network. Out method produces to be nearly optimal within reasonable run-times. It's time complexity is in O( Cn$^2$logn) as conventional multipath routing and it is much faster than Linear Programming approach. Simulation results show that the proposed traffic engineering can be controlled effectively in an administrative manner and enhance the availability of network in comparison with conventional multipath routing.

• Journal of Chest Surgery
• /
• v.51 no.2
• /
• pp.130-132
• /
• 2018

Coronary sinus ostial atresia (CSOA) with persistent left superior vena cava (LSVC) in the absence of an unroofed coronary sinus is a benign and rare anomaly that may be taken lightly in most instances. However, if overlooked in patients undergoing univentricular heart repair such as bidirectional Glenn or Fontan-type surgery, fatal surgical outcomes may occur due to coronary venous drainage failure. We report a case of CSOA with a persistent LSVC that was managed through coronary sinus rerouting during a total cavopulmonary connection, and provide a review of the literature regarding this rare anomaly.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.2
• /
• pp.13-29
• /
• 1997

This paper considers a new routing problem, successive max-min connection ratio problem (SMCRP), arised in circuit telecommunication networks such as SONET and WDM optical transport network. An optimization model for SMCRP is established based on link-flow formulation. It's first optimization process is an integral version of maximum concurrent flow problem. Integer condition does not give the same connection-ratio of each node-pair at an optimal solution any more. It is also an integral multi-commodity flow problem with fairness restriction. In order to guarantee fairness to every node-pair the minimum of connection ratios to demand is maximized. NP- hardness of SMCRP is proved and a heuristic algorithm with polynomial-time bound is developed for the problem. Augmenting path and rerouting flow are used for the algorithm. The heuristic algorithm is implemented and tested for networks of different sizes. The results are compared with those given by GAMS/OSL, a popular commercial solver for integer programming problem.n among ferrite-pearlite matrix, the increase in spheroidal ratio with increasing fatigue limitation, 90% had the highest, 14.3% increasing more then 70%, distribution range of fatigue.
ife was small in same stress level. (2) $\sqrt{area}_{max}$ of graphite can be used to predict fatigue limit of Ductile Cast Iron. The Statistical distribution of extreme values of $\sqrt{area}_{max}$ may be used as a guideline for the control of inclusion size in the steelmaking.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.3
• /
• pp.465-474
• /
• 2001

In the network with small cell radius, a mobile terminal which has large mobility should perform frequent handover. This requires that handover mechanism must be done fastly. The currently existing method for handover uses an algorithm in which the bandwidth corresponding to the adjacent cells is supposed to be allocated. However, this method leads to the problem of requiring bandwidth allocation for many-unknown cells, due to the lack of information toward moving direction in mobile terminal. In this paper, we propose an efficient dynamic bandwidth allocation algorithm for solving those problem above, based on both path rerouting handover and soft handover mechanism with wireless ATM. As for the QoS, it has been shown that proposed algorithm shows better performance than that with static bandwidth allocation algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.6
• /
• pp.1158-1168
• /
• 1994

The paper proposes a distributed control self-healing algorithm for a line failure to improve the restoration time. This proposed self-healing algorithm acquired the fast restoration time by reducing the number of control messages and the queueing delay. And the reduction of queueing delay was attained by the ASC_NULL(Available Spare Channel_NULL) message which informs neighbor nodes that a source node has no available spare channel to reduce the waste of time during the rerouting. It is difficult for this proposed self-healing algorithm to be compared with other self-healing algorithms, because each self-healing algorithm has different simulation conditions. So, the performance of the proposed self-healing algorithm was compared with only NETRATS(NETwork Restoration Algorithm for Telecommunication Systems). The results of the simulation showed that the proposed self-healing algorithm was better than NETRATS in the restoration time.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.10
• /
• pp.119-131
• /
• 1994

In this paper, we first propose a new FPGA routing method in which seversal netw are routed concurrently by applying the readitional maze routing method. We then introduce CMRF (concurrent maze Router for FPGA) which can be used for the routing of FpGAs of symmetrical array type by applying our new routing method. Given a set of nets, the proposed routing method performas the maze propagation and backtracing independently for each net and determines the routing paths concurrently by competition among nets. In CMRF, using this routing method, q nets are selected from the nets to be routed and they are routed concurrently, where q is the user given parameter determined by considering the computing environment. This process is repeated until either all the nets are routed or the remaining unrouted nets fail to their maze propagations. The routing of these nets are completed using the rip-up and rerouting technique. We apply our routing method to ten randomly generated test examples in order to check its routing performance. The results show taht as we increase the value of q, the routing completion rate increases for all the examples. Note that when q=1, our method is similar to the conventinal maze routing method. We also compare CMRF with the CGE method which has been proposed by Brown et.al. For the five benchmark examples, CMRF complete the routing with less wire segments in each connection block than the wire segments needed in the CGE method of 100% routing.