• 제목/요약/키워드: Required performance

검색결과 8,835건 처리시간 0.037초

다중 최소 임계치 기반 빈발 패턴 마이닝의 성능분석 (Performance Analysis of Frequent Pattern Mining with Multiple Minimum Supports)

  • 양흥모;윤은일
    • 인터넷정보학회논문지
    • /
    • 제14권6호
    • /
    • pp.1-8
    • /
    • 2013
  • 거대한 데이터베이스로부터 중요하고 의미 있는 정보를 찾아내기 위해 데이터 마이닝 기법들이 사용되며, 패턴 마이닝은 이러한 데이터 마이닝을 위한 중요한 기법 중에 하나이다. 패턴 마이닝은 거대 데이터베이스로부터 유용한 패턴을 찾아내는 기법이며, 패턴 마이닝 분야 중에 하나인 빈발 패턴 마이닝은 데이터베이스에서 최소 임계치 이상의 빈도수를 가지는 빈발 패턴을 마이닝 한다. 전통적인 빈발 패턴 마이닝은 전체 데이터베이스에 대한 단일 최소 임계치를 기반으로 중요 빈발 패턴을 마이닝 한다. 단일 최소 임계치 모델은 데이터베이스 내 모든 아이템이 동일한 특성을 가진다고 암묵적으로 가정한다. 그러나 실제 응용에서는 각 아이템들이 개별적인 특성을 가지고 있을 수 있으며, 따라서 이를 반영한 패턴 마이닝 기법이 요구된다. 데이터베이스 내 아이템들의 이러한 특성이 반영되지 않은 빈발 패턴 마이닝 모델에서, 중요한 희귀 아이템이 포함된 패턴을 마이닝 하기 위해서는 낮은 최소 임계치를 설정해야 한다. 그러나 너무 낮은 최소 임계치는 의미 없는 아이템들을 포함하는 수많은 패턴을 야기한다. 반대로 높은 최소 임계치는 희귀 아이템이 포함된 패턴을 마이닝 하지 못하는 희귀 아이템 문제라 불리는 딜레마가 발생한다. 이러한 문제의 해결을 위한 초기 연구들은 아이템 빈도수에 따라 데이터를 몇 개의 블록으로 분할하거나 관련 희귀 아이템들을 하나의 그룹으로 만드는 방법을 사용한 근사적 접근법을 제안하였다. 그러나 이러한 기법들은 근사적 방법의 적용에 의해 모든 희귀 패턴을 포함한 빈발 패턴을 마이닝 하지 못한다. 다중 최소 임계치를 고려한 패턴 마이닝 모델은 아이템들의 개별적인 특성을 반영하여 희귀 아이템 문제를 해결하기 위해 제안되었다. 다중 최소 임계치 기반의 빈발 패턴 마이닝 모델에서 각 아이템은 MIS (Minimum Item Support)라고 불리는 개별 최소 임계치를 가지며, 아이템들의 데이터베이스 내 빈도수를 기반으로 계산된다. 다중 최소 임계치 모델은 MIS를 통해 수많은 의미 없는 패턴을 생성하지 않고도 손실 없이 모든 희귀 빈발 패턴을 찾아낸다. 한편, 빈발 패턴을 마이닝 하는 과정에서 후보 패턴들이 생성되며, 단일 최소 임계치 모델에서는 각 후보 패턴의 빈도수가 유일한 최소 임계치와 비교된다. 따라서, 희귀 아이템 문제가 발생할 뿐만 아니라 후보 패턴을 구성하는 아이템들의 특성이 고려되지 않는다. 다중 최소 임계치 모델에서는 이 문제를 다루기 위해 후보 패턴을 구성하는 아이템들의 MIS 값 중에서 가장 작은 MIS 값을 해당 후보 패턴의 최소 임계치로 설정하여 패턴 내 아이템들의 특성을 반영한다. 이를 적용하여 효율적으로 희귀 빈발 패턴을 마이닝 하기 위해 트리 구조 기반의 알고리즘은 빈도수 내림차순으로 트리 내 아이템들을 정렬하는 단일 최소 임계치 모델과는 달리 MIS 내림차순으로 아이템들을 정렬하여 마이닝을 수행한다. 본 논문에서는 다중 최소 임계치 기반의 빈발 패턴 마이닝 알고리즘에 대한 특성을 살펴보고, 일반 단일 임계치 기반 알고리즘과의 성능평가를 수행한다. 성능평가는 실행 속도, 메모리 사용량, 그리고 확장성의 관점에서 수행된다. 성능평가 결과, 다중 최소 임계치 기반의 빈발 패턴 마이닝 알고리즘은 희귀 빈발 패턴을 포함한 모든 빈발 패턴을 단일 임계치 기반의 빈발 패턴 마이닝 알고리즘보다 더 빠른 속도로 마이닝 하였으며, 각 아이템의 최소 임계치 정보를 위한 추가적인 메모리를 필요로 하였다. 또한, 비교 알고리즘들은 좋은 확장성 결과를 보였다.

도시보건소 직원의 보건소 업무에 대한 인식 및 견해 (A Study on Perception and Attitudes of Health Workers Towards the Organization and Activities of Urban Health Centers)

  • 이재무;강복수;이경수;김천태
    • Journal of Yeungnam Medical Science
    • /
    • 제12권2호
    • /
    • pp.347-365
    • /
    • 1995
  • 도시 보건소 직원의 보건소 업무에 대한 인식 및 태도를 파악하기 위하여 대구직할시 7개 보건소 직원 310명을 대상으로 1994년 8월 15일부터 9월 30일까지 설문조사를 실시하여 252명(회수율 81.3%)의 자료를 분석하여 다음과 같은 결과를 얻었다. 조사대상은 남자가 95명(37.3%), 여자가 157명(62.3%)이고, 60.3%가 대졸이상자였다. 현재 근무부서의 시설이 보건사업을 수행하는데 적합하다고 한 의견이 28.6%, 적합하지 않다가 51.1%였고, 보유 기자재가 사업수행에 적합하다가 19.4%, 적합하지 않다가 39.0%였으며, 보건소의 인력수가 적정하다가 28.6%, 적합하지 않다가 44.8%였다. 근무부서의 예산이 보건사업 수행에 적합하다고 한 의견이 13.1%, 적합하지 않다가 38.5%였다. 지방자치제 실시후 사업내용이 바뀌어야 한다고 한 의견이 51.9%, 지방자치제의 실시가 자신의 근무부서의 업무에 도움이 된다고 한 의견이 25.4%, 도움되지 않는다가 24.6%였다. 지방자치제 실시에 따라 보건소의 조직과 기능이 개선되어야 한다는 의견은 78.6%였다. 사업 목표량의 설정이 해당 부서나 지역의 실정에 비추어 맞게 책정되어 있다는 의견이 11.1%, '그렇지 않다'가 43.3%였다. 업무 수행을 위한 전문적인 지식이나 기술에 대한 교육을 더 받아야 한다고 한 의견이 57.5%, 더 받을 필요없다가 20.6%였고, 자신의 업무수행에 자율성이 있다고 생각하는 견해가 35.7%, 자율성이 없다가 25.8%였으며, 현재 하고 일에 만족한다가 39.3%, 만족하지 못한다가 16.3%였다. 보건소의 인사관리에 대해서는 11.5% 합리적이라고 하였고, 47.3%가 불합리적 이라고 하였으며, 보건소가 주민들로부터 신뢰를 받고 있다는 의견이 41.3%, '그렇지 않다'는 의견이 13.1%였다. 보건소에서 지역주민에게 제공하는 서비스 중에서 잘 시행되고 있는 사업은 결핵관리, 일반진료, 모자보건사업의 순이었으며, 부족한 사업은 보건교육, 치과진료, 위생, 통합보건사업의 순이었다. 향후 보건소에서 주민에게 제공해야 할 서비스로는 노인보건사업, 가정의료사업, 재활보건사업, 당뇨병관리, 고혈압관리, 학교보건사업, 정신보건사업의 순으로 지적하였다. 보건소 근무자들은 시설, 기자재, 인력, 예산, 인사관리, 사업목표량의 설정 및 평가, 인사관리 등에 대해서는 부정적인 의견이 많았으며, 업무수행을 위한 보수교육, 지방자치제 실시를 통한 업무의 변화, 업무의 자율성, 업무의 만족도 면에서는 대체로 긍정적인 의견을 가진 것으로 나타났다.

  • PDF

병원 간호행정 개선을 위한 연구 (A Study for Improvement of Nursing Service Administration)

  • 박정호
    • 대한간호학회지
    • /
    • 제3권1호
    • /
    • pp.13-40
    • /
    • 1972
  • Much has teed changed in the field of hospital administration in the It wake of the rapid development of sciences, techniques ana systematic hospital management. However, we still have a long way to go in organization, in the quality of hospital employees and hospital equipment and facilities, and in financial support in order to achieve proper hospital management. The above factors greatly effect the ability of hospitals to fulfill their obligation in patient care and nursing services. The purpose of this study is to determine the optimal methods of standardization and quality nursing so as to improve present nursing services through investigations and analyses of various problems concerning nursing administration. This study has been undertaken during the six month period from October 1971 to March 1972. The 41 comprehensive hospitals have been selected iron amongst the 139 in the whole country. These have been categorized according-to the specific purposes of their establishment, such as 7 university hospitals, 18 national or public hospitals, 12 religious hospitals and 4 enterprise ones. The following conclusions have been acquired thus far from information obtained through interviews with nursing directors who are in charge of the nursing administration in each hospital, and further investigations concerning the purposes of establishment, the organization, personnel arrangements, working conditions, practices of service, and budgets of the nursing service department. 1. The nursing administration along with its activities in this country has been uncritical1y adopted from that of the developed countries. It is necessary for us to re-establish a new medical and nursing system which is adequate for our social environments through continuous study and research. 2. The survey shows that the 7 university hospitals were chiefly concerned with education, medical care and research; the 18 national or public hospitals with medical care, public health and charity work; the 2 religious hospitals with medical care, charity and missionary works; and the 4 enterprise hospitals with public health, medical care and charity works. In general, the main purposes of the hospitals were those of charity organizations in the pursuit of medical care, education and public benefits. 3. The survey shows that in general hospital facilities rate 64 per cent and medical care 60 per-cent against a 100 per cent optimum basis in accordance with the medical treatment law and approved criteria for training hospitals. In these respects, university hospitals have achieved the highest standards, followed by religious ones, enterprise ones, and national or public ones in that order. 4. The ages of nursing directors range from 30 to 50. The level of education achieved by most of the directors is that of graduation from a nursing technical high school and a three year nursing junior college; a very few have graduated from college or have taken graduate courses. 5. As for the career tenure of nurses in the hospitals: one-third of the nurses, or 38 per cent, have worked less than one year; those in the category of one year to two represent 24 pet cent. This means that a total of 62 per cent of the career nurses have been practicing their profession for less than two years. Career nurses with over 5 years experience number only 16 per cent: therefore the efficiency of nursing services has been rated very low. 6. As for the standard of education of the nurses: 62 per cent of them have taken a three year course of nursing in junior colleges, and 22 per cent in nursing technical high schools. College graduate nurses come up to only 15 per cent; and those with graduate course only 0.4 per cent. This indicates that most of the nurses are front nursing technical high schools and three year nursing junior colleges. Accordingly, it is advisable that nursing services be divided according to their functions, such as professional, technical nurses and nurse's aides. 7. The survey also shows that the purpose of nursing service administration in the hospitals has been regulated in writing in 74 per cent of the hospitals and not regulated in writing in 26 per cent of the hospitals. The general purposes of nursing are as follows: patient care, assistance in medical care and education. The main purpose of these nursing services is to establish proper operational and personnel management which focus on in-service education. 8. The nursing service departments belong to the medical departments in almost 60 per cent of the hospitals. Even though the nursing service department is formally separated, about 24 per cent of the hospitals regard it as a functional unit in the medical department. Only 5 per cent of the hospitals keep the department as a separate one. To the contrary, approximately 12 per cent of the hospitals have not established a nursing service department at all but surbodinate it to the other department. In this respect, it is required that a new hospital organization be made to acknowledge the independent function of the nursing department. In 76 per cent of the hospitals they have advisory committees under the nursing department, such as a dormitory self·regulating committee, an in-service education committee and a nursing procedure and policy committee. 9. Personnel arrangement and working conditions of nurses 1) The ratio of nurses to patients is as follows: In university hospitals, 1 to 2.9 for hospitalized patients and 1 to 4.0 for out-patients; in religious hospitals, 1 to 2.3 for hospitalized patients and 1 to 5.4 for out-patients. Grouped together this indicates that one nurse covers 2.2 hospitalized patients and 4.3 out-patients on a daily basis. The current medical treatment law stipulates that one nurse should care for 2.5 hospitalized patients or 30.0 out-patients. Therefore the statistics indicate that nursing services are being peformed with an insufficient number of nurses to cover out-patients. The current law concerns the minimum number of nurses and disregards the required number of nurses for operation rooms, recovery rooms, delivery rooms, new-born baby rooms, central supply rooms and emergency rooms. Accordingly, tile medical treatment law has been requested to be amended. 2) The ratio of doctors to nurses: In university hospitals, the ratio is 1 to 1.1; in national of public hospitals, 1 to 0.8; in religious hospitals 1 to 0.5; and in private hospitals 1 to 0.7. The average ratio is 1 to 0.8; generally the ideal ratio is 3 to 1. Since the number of doctors working in hospitals has been recently increasing, the nursing services have consequently teen overloaded, sacrificing the services to the patients. 3) The ratio of nurses to clerical staff is 1 to 0.4. However, the ideal ratio is 5 to 1, that is, 1 to 0.2. This means that clerical personnel far outnumber the nursing staff. 4) The ratio of nurses to nurse's-aides; The average 2.5 to 1 indicates that most of the nursing service are delegated to nurse's-aides owing to the shortage of registered nurses. This is the main cause of the deterioration in the quality of nursing services. It is a real problem in the guest for better nursing services that certain hospitals employ a disproportionate number of nurse's-aides in order to meet financial requirements. 5) As for the working conditions, most of hospitals employ a three-shift day with 8 hours of duty each. However, certain hospitals still use two shifts a day. 6) As for the working environment, most of the hospitals lack welfare and hygienic facilities. 7) The salary basis is the highest in the private university hospitals, with enterprise hospitals next and religious hospitals and national or public ones lowest. 8) Method of employment is made through paper screening, and further that the appointment of nurses is conditional upon the favorable opinion of the nursing directors. 9) The unemployment ratio for one year in 1971 averaged 29 per cent. The reasons for unemployment indicate that the highest is because of marriage up to 40 per cent, and next is because of overseas employment. This high unemployment ratio further causes the deterioration of efficiency in nursing services and supplementary activities. The hospital authorities concerned should take this matter into a jeep consideration in order to reduce unemployment. 10) The importance of in-service education is well recognized and established. 1% has been noted that on the-job nurses. training has been most active, with nursing directors taking charge of the orientation programs of newly employed nurses. However, it is most necessary that a comprehensive study be made of instructors, contents and methods of education with a separate section for in-service education. 10. Nursing services'activities 1) Division of services and job descriptions are urgently required. 81 per rent of the hospitals keep written regulations of services in accordance with nursing service manuals. 19 per cent of the hospitals do not keep written regulations. Most of hospitals delegate to the nursing directors or certain supervisors the power of stipulating service regulations. In 21 per cent of the total hospitals they have policy committees, standardization committees and advisory committees to proceed with the stipulation of regulations. 2) Approximately 81 per cent of the hospitals have service channels in which directors, supervisors, head nurses and staff nurses perform their appropriate services according to the service plans and make up the service reports. In approximately 19 per cent of the hospitals the staff perform their nursing services without utilizing the above channels. 3) In the performance of nursing services, a ward manual is considered the most important one to be utilized in about 32 percent of hospitals. 25 per cent of hospitals indicate they use a kardex; 17 per cent use ward-rounding, and others take advantage of work sheets or coordination with other departments through conferences. 4) In about 78 per cent of hospitals they have records which indicate the status of personnel, and in 22 per cent they have not. 5) It has been advised that morale among nurses may be increased, ensuring more efficient services, by their being able to exchange opinions and views with each other. 6) The satisfactory performance of nursing services rely on the following factors to the degree indicated: approximately 32 per cent to the systematic nursing activities and services; 27 per cent to the head nurses ability for nursing diagnosis; 22 per cent to an effective supervisory system; 16 per cent to the hospital facilities and proper supply, and 3 per cent to effective in·service education. This means that nurses, supervisors, head nurses and directors play the most important roles in the performance of nursing services. 11. About 87 per cent of the hospitals do not have separate budgets for their nursing departments, and only 13 per cent of the hospitals have separate budgets. It is recommended that the planning and execution of the nursing administration be delegated to the pertinent administrators in order to bring about improved proved performances and activities in nursing services.

  • PDF

망상대구점(网上代购店): 소비자감지풍험화산품평개대원산국형상적영향(消费者感知风险和产品评价对原产国形象的影响) (Surrogate Internet Shopping Malls: The Effects of Consumers' Perceived Risk and Product Evaluations on Country-of-Buying-Origin Image)

  • Lee, Hyun-Joung;Shin, So-Hyoun;Kim, Sang-Uk
    • 마케팅과학연구
    • /
    • 제20권2호
    • /
    • pp.208-218
    • /
    • 2010
  • 互联网快速增长, 已经成为一个重要的零售渠道, 并出现了各种互联网零售商, 又称电子零售商. 一种网上代购店蓬勃发展起来, 吸引了国内市场的消费者. 这是一种独特的电子零售商, 他们从全球购买国内市场尚未进口的名牌产品, 寄给个人购买者, 并收取服务费. 有些消费者喜欢高端独特但无进口资格的品牌, 却因付款问题或国内的寄送问题很难直接从海外零售商处购买. 在韩国, 网上代购店的数量和销售量快速增长-2008年韩国有超过430个活跃商店和5000亿销售额, 需要这种代购服务的消费者数量也在急剧增加. 这种电子零售的概念源于 "代理中介采购" -种存在已久的形式和内容多样化的代购. 通常市场经营者面对的是购买者的代表人而非本人, 由消费者决定的代理购买者影响越来越大. 很多市场营销和心理学领域的学者都研究过代理对消费者购买决定的影响范围. 然而, 在互联网商务方面却没有深入的研究. 此外, 网上代购店作为代理购买者, 将海外品牌或零售商同国内消费者连接起来. 它有一个特点, 代理购买国, 即代购商品所在国的形象对消费者的态度和购买倾向有重要影响, 还会影响消费者在进行信息处理时所感知的风险维度. 然而, 尽管对原产国不同维度的影响已有很多研究, 对网络内容的相关研究却很少. 已有研究证明, 原产国信息作为产品制造情况的线索对消费者的评价有正面影响, 但对这种形式下网络代理购买国的形象和产品评价之间的关系进行的研究却很少. 因此, 作者们发这种具体的零售渠道很值得研究, 重点结构间的系统关系以及各自不同的路径很值得探索. 已有研究证明代购原产国, 也就是代购店购买商品所在地的形象, 不仅对消费者的产品评价(包括态度和购买意向)有正面影响, 还对感知风险的三个维度有负面影响: 产品相关, 行员相关, 以及购买后的风险. 在所有的感知风险中, 由于对产品性能的高度不确定性, 产品相关的风险受负面形象的影响最大(${\beta}$= -.30), 其次是航运相关风险(${\beta}$= -.18)和购买后的风险(${\beta}$= -.15). 对产品态度(${\beta}$= .10)和购买倾向(${\beta}$= .14)也有一定影响. 此外, 经证明, 感知风险的三个维度通过对产品的态度作为中介, 对购买倾向有负面的的影响(${\beta}$= -.57: 产品相关风险${\rightarrow}$ 对产品的态度; ${\beta}$= -.24: 航运相关风险${\rightarrow}$ 对产品的态度; ${\beta}$= -.44: 购买后风险${\rightarrow}$ 对产品的态度). 从更多的分析可以看出, 消费者处理信息的路径会因其对产品知识的等级不同而改变. 新手购买者知识等级较低, 只会考虑感知风险, 而知识等级较高的专家购买者则会考虑到代理购买国的形象和感知风险两个方面, 对产品形成更准确更系统的态度和决定. 这同之前的研究相一致. 本研究提出一些理论和实际的建议. 代理购买国的形象会影响消费者的风险感知和行为结果, 因此应谨慎选择代购国家, 如果这种新型的零售业务快速发展起来, 应控制好消费者的风险, 无论是新手或专家. 另外, 由于消费者各自知识等级不同, 处理信息的路径也不尽相同, 针对不同消费者应形成成熟的市场营销手段. 新手购买者需要风险消减方面的建议, 以帮助他们形成更好的态度, 而专家购买者应选择更好更发达的国家进行代购. 消费者可以使用担保策略来促使在线购物的顺利进行. 本研究没有拘于概括性等限制. 在今后的研究中, 应进一步测试比较有相关结构的不同电子零售商.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.15-15
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구 (Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines)

  • 노상하;최재갑
    • Journal of Biosystems Engineering
    • /
    • 제1권1호
    • /
    • pp.17-48
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

  • PDF

개인화된 뉴스 서비스를 위한 소셜 네트워크 기반의 콘텐츠 추천기법 (Content-based Recommendation Based on Social Network for Personalized News Services)

  • 홍명덕;오경진;가명현;조근식
    • 지능정보연구
    • /
    • 제19권3호
    • /
    • pp.57-71
    • /
    • 2013
  • 세계에는 수많은 사람들이 살아가고 있고, 사람들의 일상으로부터 매일, 매 시간 단위로 새로운 뉴스가 발생한다. 발생되는 뉴스는 예정된 일과 예상하지 못한 일들을 포함하고 있다. 발생하는 뉴스의 거대한 양과 이를 전달하는 수많은 미디어들로 인해 사람들은 뉴스 콘텐츠를 이용하는데 많은 시간을 소비하게 된다. 하지만 미디어에 시시각각 나타나는 속보와 실시간 이슈의 대부분이 가십 기사로 이루어져 있어 사용자들이 자신의 성향에 맞는 뉴스를 선별하고, 뉴스로부터 정보를 획득하는 것은 쉽지 않은 일이다. 또한 사용자의 관심사가 시간에 따라 변하기 때문에 뉴스 제공에 있어 사용자의 변하는 관심사를 반영하는 것이 요구된다. 본 논문에서는 사용자의 최근 관심사를 기반으로 사용자 선호도에 맞는 뉴스를 제공하기 위한 콘텐츠 기반의 추천 기법 및 시스템을 제안한다. 사용자의 최근 선호도를 파악하기 위하여 소셜 네트워크 서비스인 Facebook 사용자의 정보와 최근 게시글을 이용하여 동적으로 사용자 프로파일을 생성하여 이를 뉴스 서비스에 활용하고, 사용자 선호도에 적합한 뉴스를 추출하기 위해서 뉴스 콘텐츠의 분석을 요구한다. 뉴스 콘텐츠 분석을 위해 미디어에서 제공되는 뉴스의 카테고리를 사용하고, 뉴스 방송원고의 분석 및 주요 키워드 추출을 통해 뉴스 프로파일을 생성한다. 사용자 프로파일과 뉴스 프로파일 간의 유사도 측정을 위해서는 두 프로파일 간 형식의 일치화가 요구되므로 사용자 프로파일을 뉴스 프로파일과 동일한 형태로 생성한다. 사용자가 시스템에 접속하면 시스템은 사용자 프로파일에 명시된 선호도를 기반으로 뉴스 프로파일과의 유사도를 측정하고, 사용자 선호도에 가장 적합한 뉴스들을 제공하게 된다. 또한 사용자에게 제공된 뉴스 프로파일과 다른 뉴스 프로파일들 간에 유사도를 측정하여 유사도가 높은 관련된 뉴스들을 제공하게 된다. 제안한 개인화된 뉴스 서비스의 성능을 평가하기 위해 사용자에게 추천된 뉴스에 대한 사용자 평가와 시스템 예측값의 오차를 기반으로 6Sub-Vectors 벤치마크 알고리즘과 성능 평가를 수행하였고, 실험 결과를 통해 제안한 시스템의 우수성을 입증하였다.

머신러닝 기반 기업부도위험 예측모델 검증 및 정책적 제언: 스태킹 앙상블 모델을 통한 개선을 중심으로 (Machine learning-based corporate default risk prediction model verification and policy recommendation: Focusing on improvement through stacking ensemble model)

  • 엄하늘;김재성;최상옥
    • 지능정보연구
    • /
    • 제26권2호
    • /
    • pp.105-129
    • /
    • 2020
  • 본 연구는 부도위험 예측을 위해 K-IFRS가 본격적으로 적용된 2012년부터 2018년까지의 기업데이터를 이용한다. 부도위험의 학습을 위해, 기존의 대부분 선행연구들이 부도발생 여부를 기준으로 사용했던 것과 다르게, 본 연구에서는 머튼 모형을 토대로 각 기업의 시가총액과 주가 변동성을 이용하여 부도위험을 산정했으며, 이를 통해 기존 방법론의 한계로 지적되어오던 부도사건 희소성에 따른 데이터 불균형 문제와 정상기업 내에서 존재하는 부도위험 차이 반영 문제를 해소할 수 있도록 하였다. 또한, 시장의 평가가 반영된 시가총액 및 주가 변동성을 기반으로 부도위험을 도출하되, 부도위험과 매칭될 입력데이터로는 비상장 기업에서 활용될 수 있는 기업 정보만을 활용하여 학습을 수행함으로써, 포스트 팬데믹 시대에서 주가 정보가 존재하지 않는 비상장 기업에게도 시장의 판단을 모사하여 부도위험을 적절하게 도출할 수 있도록 하였다. 기업의 부도위험 정보가 시장에서 매우 광범위하게 활용되고 있고, 부도위험 차이에 대한 민감도가 높다는 점에서 부도위험 산출 시 안정적이고 신뢰성 높은 평가방법론이 요구된다. 최근 머신러닝을 활용하여 기업의 부도위험을 예측하는 연구가 활발하게 이루어지고 있으나, 대부분 단일 모델을 기반으로 예측을 수행한다는 점에서 필연적인 모델 편향 문제가 존재하고, 이는 실무에서 활용하기 어려운 요인으로 작용하고 있다. 이에, 본 연구에서는 다양한 머신러닝 모델을 서브모델로 하는 스태킹 앙상블 기법을 활용하여 개별 모델이 갖는 편향을 경감시킬 수 있도록 하였다. 이를 통해 부도위험과 다양한 기업정보들 간의 복잡한 비선형적 관계들을 포착할 수 있으며, 산출에 소요되는 시간이 적다는 머신러닝 기반 부도위험 예측모델의 장점을 극대화할 수 있다. 본 연구가 기존 머신러닝 기반 모델의 한계를 극복 및 개선함으로써 실무에서의 활용도를 높일 수 있는 자료로 활용되기를 바라며, 머신러닝 기반 부도위험 예측 모형의 도입 기준 정립 및 정책적 활용에도 기여할 수 있기를 희망한다.

정신분석학적 '욕망의 주체' 이해에 기초한 사랑의 교육 교육과정 개발 (A Study on Practical Curriculum Development of the Education for Love based on the Understanding of Psychoanalytic 'Desire of Subject')

  • 김선아
    • 기독교교육논총
    • /
    • 제68권
    • /
    • pp.77-112
    • /
    • 2021
  • 본 연구에서는 돌토의 정신분석학적 관점을 중심으로 사랑의 교육 교육과정을 두 가지 영역에서 재구성하여 제시한다. 그 첫 번째 영역은 '사랑의 교육 교육과정의 방향 및 이에 따른 세부목적'이다. 이 영역에서 연구자는 사랑의 교육 교육과정의 방향을 '주체상호적인 사랑의 소통을 위한 사랑의 교육 교육과정'과 '욕망의 주체를 위한 사랑의 교육 교육과정'으로 재구성하여 제시한다. 사랑의 교육 교육과정의 방향에 따른 세부목적은 '말하는 존재로서의 주체 구성하기'와 '욕망의 자율적 원천으로서의 주체 깨닫기'로 재구성하여 제시한다. 사랑의 교육 교육과정의 방향 및 이에 따른 세부목적을 재구성하는 목표는 우리의 미래세대가 주체상호적인 사랑의 소통을 이루며 사랑을 욕망하는 주체로서 살아가도록 길인도 하고자 하는 데 있다. 두 번째 영역은 '사랑의 교육 교육과정의 과제 및 이에 따른 세부내용'이다. 이 영역에서 연구자는 사랑의 교육 교육과정의 과제를 '아가페적 사랑의 욕망 패러다임으로 전환하기'와 '사랑의 교육과정을 통해 전인성 형성하기'로 재구성하여 제시한다. 이에 따른 사랑의 교육 교육과정의 세부내용은 '아가페적 사랑의 욕망의 진실 깨닫기'와 '일상의 삶에서 아가페적 사랑 실천하기'로 재구성하여 제시한다. 사랑의 교육 교육과정 과제 및 세부내용의 재구성 목표는 우리의 미래세대가 아가페적 사랑의 욕망 패러다임으로 전환한 사랑의 교육 교육과정을 통해 일상의 삶에서 아가페적 사랑을 실천하며 사는 전인적 '욕망의 주체'가 되도록 길인도 하는 데 있다. 이에 더 나아가, 본 연구에서는 생애주기별(태아기, 영유아기, 아동기)로 돌토의 정신분석학적 관점에서 사랑의 교육 교육과정을 재구성한 실제를 제시한다. 결론에서는, 이와 같은 연구결과물이 현장에서 활용되기 위해 요구되는 교육적 실천을 제안하고, 본 연구 결과물의 후속 연구를 위한 제언 및 전망을 함으로써 본 연구의 여정을 마무리 한다.

치과코디네이터의 업무수행 및 인식도에 관한 조사연구 (A Study on the Job Performance of Dental Coordinators and Their Perception)

  • 권순복;김영남;문희정;신명숙;한경순;한수진
    • 치위생과학회지
    • /
    • 제5권4호
    • /
    • pp.211-220
    • /
    • 2005
  • 서울, 경기, 인천 지역을 중심으로 치과코디네이터가 근무하는 치과병 의원 선정하여 현직 치과코디네이터들을 대상으로 치과코디네이터의 업무수행 정도와 인식도를 조사하여, 보다 효율적인 인력활용 방안을 마련하는 기초를 제공하고자 2005년 5월 1일부터 8월 8일까지 설문지를 통하여 자료를 수집한 후 회수된 108부를 분석한 결과는 다음과 같다. 1. 응답한 치과코디네이터들의 치과근무기간은 5년 이상이 43.5%, 2년 미만이 19.5%, 3년 이상 5년 미만이 19.4%의 순으로 나타났고, 치과코디네이터로서의 업무기간은 2년 미만이 39.8%, 2년 이상 3년 미만과 5년 이상이 각 19.4%의 순으로 나타났다. 그리고 현재 불리워지는 명칭으로는 실장(팀장)이 38%, 코디네이터가 30.6%이었으며, 치과코디네이터로 담당하는 세부 업무로는 리셉션이 30.6%로 가장 높았고, 소속된 부서는 진료지원팀이 57.4%로 가장 높게 나타났다. 2. 교육관련 사항으로는 치과코디네이터가 되기 위해 가장 많이 교육을 받은 기관으로는 45.4%가 사설기관이고, 응답자의 73.1%가 공인된 치과코디네이터 자격시험이 필요하다고 응답하였다. 또한 자격인정을 위한 적절한 공인기관으로는 중앙부처라고 응답한 율이 43.5%로 가장 높았고, 응답자의 70.8%는 이수한 업무교육 내용이 직무수행에 적합했다고 응답하였다. 치과코디네이터 업무능력 향상을 위한 지속교육 필요 여부는 96.3%가 "예"라고 응답하였고, 그 이유는 능력향상을 위해서가 63.9%, 체계적인 교육을 위해서가 22.2였다. 교육비 부담은 근무기관에서 총 교육비의 일정액 보조가 29.6%, 전액 자비 부담이 25.9%였다. 치과코디네이터 교육과정 중 필수 이수항목에서는 의료서비스 마케팅이 66.7%, 치과코디네이터 이론과 실무가 65.7%, 치과의료기초 57.4%의 순이었고, 보완을 희망하는 교육항목은 치과의료서비스 마케팅이 46.3%, 건강보험실무가 35.2%였다. 3. 치과코디네이터로서 현재 수행하는 업무는 고객관리 분야에서는 예약관리가 88.9%, 자기관리 분야에서는 서비스기본매너 갖추기가 87.9%, 원무관리 분야에서는 수납이 81.3%로 높게 나타났다. 4. 치과코디네이터의 수행업무에 대한 인식으로는 '현재 수행하고 있는 직종에 자부심을 가지고 있다($3.99{\pm}0.76$)', '치과코디네이터 업무는 경영 기여도가 높다고 생각한다($3.92{\pm}0.70$)', '내가 수행하는 업무는 전체 치과병 의원 업무에서 차지하는 비중이 크다($3.91{\pm}0.84$)', '나는 직원들과 직급에 관계없이 잘 지낸다($3.86{\pm}0.74$)', '업무를 통하여 환자의 구강건강 증진에 많은 도움이 되고 있다고 생각한다($3.76{\pm}0.75$)', '내 직업은 미래 전망이 밝다($3.74{\pm}0.86$)' 순으로 높게 나타났다. 5. 치과코디네이터의 연령별로 인식을 살펴보면 대체적으로 모든 항목에서 연령이 높을수록 업무에 대한 인식도가 높은 것으로 나타났고, '내가 수행하는 업무는 전체 치과병 의원업무 차지하는 비중이 크다'(P < 0.001), '수행하는 업무에 대하여 경영자의 인정과 신뢰를 받는다'(P < 0.01), '현재 수행하고 있는 직종에 자부심을 가지고 있다', '내 직업에 대한 사회적 인지도가 높다', '스텝들은 치과코디네이터들이 하는 일에 대해 이해하고 인정한다', '치과의사들은 치과코디네이터들이 하는 일에 대해 이해하고 인정한다', '현재 불리워지는 직명에 만족한다', '내 직업은 나이의 제한을 받지 않는다고 생각한다', '치과 코디네이터 업무는 경영 기여도가 높다고 생각한다'(P < 0.05)의 항목에서는 연령별로 통계적 유의성이 유의한 차이를 보였다. 6. 치과코디네이터의 직종별로 업무에 대한 인식을 살펴보면 대부분의 항목에서 치과위생사, 간호조무사, 기타 순으로 업무에 대한 만족도가 높은 것으로 나타났다. 그리고 '업무를 수행함에 있어서 업무관련 결정을 내가 하고 있다'(P < 0.001), ' 내가 수행하는 업무는 전체 병원업무에서 차지하는 비중이 크다', '내 업무는 나의 능력을 향상시켜 준다', '업무를 통하여 환자의 구강건강건강 증진에 많은 도움이 되고 있다고 생각한다', '현재 받고 있는 보수에 만족한다', '스텝들은 치과코디네이터들이 하는 일에 대해 이해하고 인정한다'(P < 0.01), '내 직업에 대한 사회적 인지도가 높다', '업무 수행시 스텝과의 갈등이 없다', '치과병 의원에서는 치과코디네이터의 능력향상을 위한 자기개발 기회를 주고 있다'(P < 0.05)의 항목에서 통계적으로 유의한 차이를 보였다.

  • PDF