• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4640-4661
• /
• 2018

To cope with the explosive growth of Internet services, Service Function Chaining (SFC) based on Software-defined Networking (SDN) is an emerging and promising technology that has been suggested to meet this challenge. Determining the placement of Virtual Network Functions (VNFs) and routing paths that optimize the network utilization and resource consumption is a challenging problem, particularly without violating service level agreements (SLAs). This problem is called the optimal SFC placement problem and an Integer Linear Programming (ILP) formulation is provided. A greedy heuristic solution is also provided based on an improved two-step mapping algorithm. The obtained experimental results show that the proposed algorithm can automatically place VNFs at the optimal locations and find the optimal routing paths for each online request. This algorithm can increase the average request acceptance rate by about 17.6% and provide more than 20-fold reduction of the computational complexity compared to the Greedy algorithm. The feasibility of this approach is demonstrated via NetFPGA-10G prototype implementation.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.4
• /
• pp.9-17
• /
• 2020

When IoT sensor nodes are deployed in areas where data collection is challenging, sensors must be relocated if sensing holes occur due to improper placement of sensors or energy depletion, and data collection is impossible. The sensing hole's cluster header transmits a request message for sensor relocation to an adjacent cluster header through a specific relay node. However, since a specific relay node is frequently used, a member sensor located in a specific cluster area adjacent to the sensing hole can continuously receive the movement message. In this paper, we propose a method that avoids the situation in which the sensing hole cluster header monopolizes a specific relay node and allows the cluster header to use multiple relay nodes fairly. Unlike the existing method in which the relay node immediately responds to the request of the header, the method proposed in this paper solves a ping-pong problem and a problem that the request message is concentrated on a specific relay node by applying a method of responding to the request of the header using a timer. OMNeT++ simulator was used to analyze the performance of the proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1652-1660
• /
• 1999

One of the most important goals in VOD servers is to provide services to more clients with services which clients request. In order to provide service efficiently and rapidly, though considering a few of policies, efficient placement of data when they are stored is direct cause to improve efficiency of retrievals. In this paper, we propose a efficient placement policy, encoded video data being stored in clustered VOD servers. In the proposed placement policy, partitioning a large disk array into smaller disk groups which consists of a few of disks with similar performances, specially disk I/O bandwidth. In last chapter, we compare proposed placement policy with conventional policies, and show the results of improved performances with proposed policy.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.09a
• /
• pp.261-278
• /
• 2003

Concepts.Wafer-Level Chip-Scale Concept with Handling Substrate.Low Accuracy Placement Layout with Isolation Trench.Possible Pitch of Interconnections down to $10{\mu}{\textrm}{m}$ (Sn-Grains).Wafer-to-Wafer Equipment Adjustment Accuracy meets this Request of Alignment Accuracy (+/-1.5 ${\mu}{\textrm}{m}$).Adjustment Accuracy of High-Speed Chip-to-Wafer Placement Equipment starts to meet this request.Face-to-Face Modular / SLID with Flipped Device Orientation.interchip Via / SLID with Non-Flipped Orientation SLID Technology Features.Demonstration with Copper / Tin-Alloy (SLID) and W-InterChip Vias (ICV).Combination of reliable processes for advanced concept - Filling of vias with W as standard wafer process sequence.No plug filling on stack level necessary.Simultanious formation of electrical and mechanical connection.No need for underfiller: large area contacts replace underfiller.Cu / Sn SLID layers $\leq$ $10{\mu}{\textrm}{m}$ in total are possible Electrical Results.Measurements of Three Layer Stacks on Daisy Chains with 240 Elements.2.5 Ohms per Chain Element.Contribution of Soldering Metal only in the Range of Milliohms.Soldering Contact Resistance ($0.43\Omega$) dominated by Contact Resistance of Barrier and Seed Layer.Tungsten Pin Contribution in the Range of 1 Ohm

• Journal of Internet Computing and Services
• /
• v.18 no.1
• /
• pp.37-41
• /
• 2017

In this paper, a platform was proposed that can service the streaming of location based real-time video-clip for smart-travel-services to work with PPL(Product Placement). The location information of drama like as LTE GPS and Beacon were used to provide the drama video with the PUSH service. And PPL DB with the attributes like as picture, video, music and URI(Uniform resource Identifier) was designed. As a result, this platform could provide the location based video streaming service that could replace the original PPL properties, color or shape, with the other properties by the interactive tagging the PPL DB in drama scenes. The proposed platform could provide the location based real-time video streaming service that can alter the PPL properties with the request of service provider.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11B
• /
• pp.1142-1150
• /
• 2009

In this paper, we propose an novel bandwidth scheduling algorithm for the MAC protocol employed by the Data Over Cable Service Interface Specifications (DOCSIS) 3.0 compliant cable networks. The proposed algorithm statistically improves the chances of request piggybacking to minimize the access delay. It utilizes the piggyback request feature of the segment packets that has been newly specified in DCOSIS 3.0. In DOCSIS 3.0, a bandwidth request can be granted to several upstream channels within an upstream bonding group. The grant on each individual channel is treated as a segment packet. We find the optimal segment placement to minimize the access delay in the proposed algorithm. We also use a self-similar traffic model for simulation and analysis to evaluate the performance of the proposed algorithm.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.11
• /
• pp.250-255
• /
• 2020

For the resolution of the latency problem of the cloud center-based cloud computing, fog computing was proposed that allows end devices to offload computations to nearby fog nodes. In the fog computing, virtualized service images are placed on fog nodes and, if service images are placed close to end devices, the duplicate service image placement problem may occur. Therefore, in this paper, we propose a service image placement mechanism based on the logical fog network that reduces duplicate service images by considering the pattern of collected service requests. For the performance evaluation of the proposed mechanism, through simulations, we compare ours with the on-demand mechanism placing a service image upon the receipt of a service request. We consider the performance factors like the number of service images, the number of non-accommodated service requests, and the network cost.

• Journal of KIISE:Information Networking
• /
• v.28 no.2
• /
• pp.229-235
• /
• 2001

With the explosive popularity of the World Wide Web, the low penonnance of network often leads web clients to wait a long time for web server's response. To resolve this problem, web caching (proxy) has been considered as the most efficient technique for web server to handle this problem. The placement of web proxy is critical to the overall penonnance, and Li et al. showed the optimal placement of proxies for a web server in the internet with the linear and tree topology when the number of proxies, ]M, is given [4, 5]. They focused on minimizing the over all access time. However, it is also considerable for target web server to minimize the total number of proxies while each proxy server guarantees not to exceed certain res(Xlnse time for each request from its clients. In this paper, we consider the problem of finding the optimal number and placement of web proxies with the lin~ar and tree topology under the given threshold cost for delay time.

• Clinical and Experimental Reproductive Medicine
• /
• v.42 no.3
• /
• pp.126-129
• /
• 2015

Essure (Bayer) received approval from the U.S. Food and Drugs Administration as a permanent non-hormonal contraceptive implant in November 2002. While the use of Essure in the management of hydrosalpinx prior to in vitro fertilization (IVF) remains off-label, it has been used specifically for this purpose since at least 2007. Although most published reports on Essure placement before IVF have been reassuring, clinical experience remains limited, and no randomized studies have demonstrated the safety or efficacy of Essure in this context. In fact, no published guidelines deal with patient selection or counseling regarding the Essure procedure specifically in the context of IVF. Although Essure is an irreversible birth control option, some patients request the surgical removal of the implants for various reasons. While these patients could eventually undergo hysterectomy, at present no standardized technique exists for simple Essure removal with conservation of the uterus. This article emphasizes new aspects of the Essure procedure, as we describe the first known association between the placement of Essure implants and the subsequent development of fluid within the uterine cavity, which resolved after the surgical removal of both devices.

• The Korean Journal of Emergency Medical Services
• /
• v.15 no.3
• /
• pp.31-44
• /
• 2011

Purpose : The purpose of emergency medical services(EMS) is to save human lives and assure the completeness of the body in emergency situations. Those who have been qualified on medical practice to perform such treatment as there is the risk of human life and possibility of major physical and mental injuries that could result from the urgency of time and invasiveness inflicted upon the body. In the emergency medical activities, 119 emergency medical technicians mainly perform the task but they are not able to perform such task independently and they are mandatory to receive medical direction. The purpose of this study is to examine the recognition and request for medical direction by 119 emergency medical technicians in order to provide basic information on the development of medical direction program suitable to the characteristics of EMS as well as for the studies on EMS for the sake of efficient operation of pre-hospital EMS. Method : Questionnaire via e-mail was conducted during July 1-31, 2010 for 675 participants who are emergency medical technicians, nurses and other emergency crews in Gyeongbuk. The effective 171 responses were used for the final analysis. In regards to the emergency medical technicians' scope of responsibilities defined in Attached Form 14, Enforcement regulations of EMS, t-test analysis was conducted by using the means and standard deviation of the level of request for medical direction on the scope of responsibilities of Level 1 & Level 2 emergency medical technicians as the scale of medical direction request. The general characteristics, experience result, the reason for necessity, emergency medical technicians & medical director request level, medical direction method, the place of work of the medical director, feedback content and improvement plan request level were analyzed through frequency and percentage. The level of experience in medical direction and necessity were analyzed through ${\chi}^2$ test. Results : In regards to the medical direction experience per qualification, the experience was the highest with 53.3% for Level 1 emergency medical technicians and 80.3% responded that experience was helpful. As for the recognition on the necessity of medical direction, 71.3% responded as "necessary" and it turned out to be the highest of 76.9% in nurses. As for the reason for responding "necessary", the reason for reducing the risk and side-effects from EMS for patients was the largest(75.4%), and the reason of EMS delay due to the request of medical direction was the highest(71.4%) for the reason for responding "not necessary". In regards to the request level of the task scope of emergency medical technicians, injection of certain amount of solution during a state of shock was the highest($3.10{\pm}.96$) for Level 1 emergency rescuers, and the endotracheal intubation was the highest($3.12{\pm}1.03$) for nurses, and the sublingual administration of nitroglycerine(NTG) during chest pain was the highest($2.62{\pm}1.02$) for Level 2 emergency medical technicians, and regulation of heartbeat using AED was the highest($2.76{\pm}.99$) for other emergency crews. For the revitalization of medical direction, the improvement in the capability of EMS(78.9%) was requested from emergency crew, and the ability to evaluate the medical state of patient was the highest(80.1%) in the level of request for medical director. The prehospital and direct medical direction was the highest(60.8%) for medical direction method, and the emergency medical facility was the highest(52.0%) for the placement of medical director, and the evaluation of appropriateness of EMS was the highest(66.1%) for the feedback content, and the reinforcement of emergency crew(emergency medical technicians) personnel was the highest(69.0%) for the improvement plan. Conclusion : The medical direction is an important policy in the prehospital EMS activity because 119 emergency medical technicians agreed the necessity of medical direction and over 80% of those who experienced medical direction said it was helpful. In addition, the simulation training program using algorithm and case study through feedback are necessary in order to enhance the technical capability of ambulance teams on the item of professional EMS with high level of request in the task scope of emergency medical technicians, and recognition of medical direction is the essence of the EMS field. In regards to revitalizing medical direction, the improvement of the task performance capability of 119 emergency medical technicians and medical directors, reinforcement of emergency medical activity personnel, assurance of trust between emergency medical technicians and the emergency physician, and search for professional operation plan of medical direction center are needed to expand the direct medical direction method for possible treatment beforehand through the participation by medical director even at the step in which emergency situation report is received.