• 한국콘텐츠학회논문지
• /
• 제17권12호
• /
• pp.266-271
• /
• 2017

본 연구는 자기공명검사 시 재현성이 달라져 신호강도가 저하되는 문제점을 후처리 기법인 DOTS 기법을 적용함으로써 개선하고자 하였다. 연구방법은 재현성이 떨어져 신호강도 저하가 가장 빈번하게 발생하는 간 검사를 시행한 30명을 대상으로 하였으며, 조영제 주입 전 후 영상을 획득한 다음 DOTS 기법으로 영상을 후처리하여 적용 여부에 따른 영상의 신호강도를 비교 평가하였다. 연구결과 영상의 신호강도는 DOTS 기법을 적용한 경우가 적용하지 않은 경우보다 조영제 주입 전에는 183.3%(적용 전 $1038.0{\pm}70.7$, 적용 후 $2940.7{\pm}179.6$), 주입 후에는 1118.4%($444.1{\pm}92.4$, 적용 후 $5410.5{\pm}168.4$) 유의하게 증가하였다. 이는 후처리 기법인 DOTS 기법을 통해 영상척도의 기준을 재설정하여 개선한 것으로써 자기공명검사 시 재현성이 달라져 신호강도가 저하되는 문제를 근본적으로 해결하였다는 데 의의가 있다.

• Imaging Science in Dentistry
• /
• 제42권1호
• /
• pp.25-33
• /
• 2012

Purpose : This study was performed to determine the accuracy of linear measurements on three-dimensional (3D) images using multi-detector computed tomography (MDCT) and cone-beam computed tomography (CBCT). Materials and Methods : MDCT and CBCT were performed using 24 dry skulls. Twenty-one measurements were taken on the dry skulls using digital caliper. Both types of CT data were imported into OnDemand software and identification of landmarks on the 3D surface rendering images and calculation of linear measurements were performed. Reproducibility of the measurements was assessed using repeated measures ANOVA and ICC, and the measurements were statistically compared using a Student t-test. Results : All assessments under the direct measurement and image-based measurements on the 3D CT surface rendering images using MDCT and CBCT showed no statistically difference under the ICC examination. The measurements showed no differences between the direct measurements of dry skull and the image-based measurements on the 3D CT surface rendering images (P>.05). Conclusion : Three-dimensional reconstructed surface rendering images using MDCT and CBCT would be appropriate for 3D measurements.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.746-749
• /
• 2003

Alignment of 2D-gel images of biological samples can visualize the difference of expression profiles and also inform us candidates of protein spots to be further analyzed. However, comparison of two proteome images between case and control does not always successfully identify differentially expressed proteins due to sample-to-sample variation. Because of poor reproducibility of 2D-gel electrophoresis, sample-by-sample variations and inconsistent electrophoresis conditions, multiple number of 2D-gel image must be processed to align each other to visualize the difference of expression profiles and to deduce the protein spots differentially expressed with reliability. Alignment of multiple 2D-Gel images and their clustering were carried out by applying various algorithms and statistical methods. In order to align multiple images, multiresolution-multilevel algorithm was found out to be suitable for fast alignment and for distorted images. Clustering of 12 different images implementing a k-means algorithm gives a phylogenetic tree of distance map of the proteomes. Microsoft Visual C++ was used to implement the algorithms in this work.

• The Korean Journal of Pain
• /
• 제31권4호
• /
• pp.268-276
• /
• 2018

Background: Although a variety of instruments implement body maps for the precise identification of pain symptoms, no instrument has been validated for use in people with obesity. This study reports the adaptation and validation of body maps for musculoskeletal pain location in people with obesity. Methods: Nine key anatomical regions were highlighted based on the original images of the Nordic Musculoskeletal Questionnaire body maps. Adult silhouettes were generated from photographs of men and women with obesity. The body dimensions were adjusted to take into account the different body fat distribution patterns of people with obesity. The validity of the images was assessed by 12 experts. Subsequently, a data collection stage was performed with 58 patients with severe obesity from both sexes. The reproducibility of the images was tested by comparison with the original images. Results: The results of the validation pilot study indicated that the adapted images facilitated the location of musculoskeletal pain in men and women with obesity. The reproducibility of the original and adapted versions of the body maps indicated good agreement for pain over the last 12 months and 7 days (80% vs. 79.7%). Pain scores in the last 12 months indicated good and high sensitivity and specificity for all body areas (60.9% vs. 89.1%). Considering pain in the last 7 days, high sensitivity and specificity for all areas of the body (85.1% vs. 70.1%). Conclusions: The body maps developed in this study are reliable and valid to identify the location of pain in people with obesity.

• 스마트미디어저널
• /
• 제5권1호
• /
• pp.44-48
• /
• 2016

장기추적 뇌영상 연구에서 자기공명영상장치의 노후 또는 기술 발전에 따른 업그레이드로 인해 연구기간 내 동일한 촬영 조건을 유지하기 어렵다. 특히, 자장 세기가 1.5T에서 3T로 증가한 경우가 많아, 기존 1.5T 영상을 새로운 3T 영상과 통합해서 분석에 사용하는 것이 가능한지 확인할 필요가 있다. 본 논문에서는 자장 세기와 스캔 방향이 다른 자기공명영상에서 측정한 해마 체적의 재현성을 연구 분석하였다. 실험참가자 296명의 3차원 T1 영상을 1.5와 3T 자기공명영상장치 각각에서 스캔 방향을 달리하여 획득하고 뇌영상 연구에 널리 사용되는 Freesurfer를 이용하여 실험참가자의 해마 체적을 측정하였다. 해마 체적의 영상종류 간 차이를 확인하기 위해 대응표본t-검정을 수행한 결과, 자기공명영상장치의 자장 세기와 스캔 방향에 따라 해마체적이 유의하게 차이가 있음을 확인하였다. 이런 결과는 촬영조건에 따라 측정된 해마체적이 달라질 수 있음을 의미하므로, 촬영 조건이 다른 영상을 통합 분석할 수 있는 기법의 개발이 필요하다고 판단된다.

• Tuberculosis and Respiratory Diseases
• /
• 제57권6호
• /
• pp.515-521
• /
• 2004

With the increasing resolution of modern CT scanners, analysis of the larger numbers of images acquired in a lung screening exam or diagnostic study is necessary, which also needs high accuracy and reproducibility. Recent developments in the computerized analysis of medical images are expected to aid radiologists and other healthcare professional in various diagnostic tasks of medical image interpretation. This article is to provide a brief overview of some of computer-aided diagnosis schemes in chest CT.

• 대한방사선치료학회지
• /
• 제29권2호
• /
• pp.33-41
• /
• 2017

목 적: 종양에는 최대한의 선량을 부여하고 주변의 정상조직에는 최소한의 선량이 조사되도록 부작용을 줄이는 목적으로 방사선 치료기술이 발전함에 따라 다양한 치료계획 및 치료 방법이 개발되고 있다. 방사선 치료 시 CT(Computed tomography)와 MRI(Magnetic resonance imaging)영상의 융합은 종양에 선량을 전달하는데 커다란 역할을 한다. 본 연구의 목적은 치료계획 시 자체 제작한 팬톰을 이용하여 CT와 MRI영상들의 융합을 통해 영상의 재현성 및 유용성을 평가하고 획득한 영상에서 타겟 선량을 비교, 분석해보고자 한다. 대상 및 방법: 자체 제작한 팬톰을 이용하여 CT 촬영을 하고, 자장의 세기가 다른 1.5T 와 3.0T의 MRI 촬영을 하여 영상을 획득한다. CT 촬영을 한 팬톰의 영상과 각기 다른 자장의 세기로 촬영한 팬톰의 MRI영상에서 팬톰 내에 존재하는 작은 홀의 크기 및 용적의 재현성을 비교하고, 임의의 타겟에서 선량 변화를 비교, 분석한다. 결 과: 13개의 작은 홀 직경은 CT 촬영에서 최대 31 mm, 최소 27.54 mm를 나타냈으며, 실제 제작한 것과 비교하여 평균 29.28 mm 1 % 이내로 측정되었다. 1.5T MRI 퓨전 영상에서는 최대 31.65 mm, 최소 24.3 mm를 나타냈으며, 평균 28.8 mm 1 % 이내로 측정되었다. 3.0T MRI 퓨전 영상에서는 최대 30.2 mm, 최소 27.92 mm를 나타냈으며, 평균 29.41 mm 1.3 % 이내로 측정되었다. 타겟의 조사된 선량변화는 CT에서 95.9-102.1 %, CT-1.5T MRI 퓨전영상에서 93.1-101.4 %, CT-3.0T MRI 퓨전영상에서는 96-102 %의 선량변화를 보였다. 결 론: CT 및 MRI는 영상획득 시 다른 알고리즘이 적용된다. 또한 인체의 장기는 각기 다른 밀도를 가지고 있으므로 영상 획득 시 이미지 왜곡이 발생할 수 있다. 이러한 부정확한 영상의 묘사는 타겟의 용적범위 및 선량에 영향을 주기 때문에 정확한 타겟의 용적과 위치는 불필요한 선량이 조사되는 것을 방지하며, 치료계획 시 오차를 방지할 수 있다. 즉 CT와 MRI 영상이 가지고 있는 영상 표출 알고리즘의 장점을 이용하여 치료계획에 적용해야 할 것이다.

• Imaging Science in Dentistry
• /
• 제33권3호
• /
• pp.171-178
• /
• 2003

Purpose: The purpose of this study was to report the reproducibility of intra-observer and inter-observer consistency of cephalometric measurements using three-dimensional (3D) computed tomography (CT), and the degree of difference of the cephalometric measurements. Materials and Methods: CT images of 16 adult patients with normal class I occlusion were sent to personal computer and reconstructed into 3D images using V-Works 3.5/sup TM/(Cybermed Inc., Seoul, Korea). With the internal program of V-Works 3.5/sup TM/, 12 landmarks on regular cephalograms were transformed into 21 analytic categories and measured by 2 observers and in addition, one of the observers repeated their measurements. Intra-observer difference was calculated using paired t-test, and inter-observer by two sample test. Results: There were significant differences in the intra-observer measurements (p < 0.05) in four of the categories which included ANS-Me, ANS-PNS, Cdl-Go (Lt), GoL-GoR, but with the exception of Cdl-Go (Lt), ZmL-ZmR, Zyo-Zyo, the average differences were within 2 mm of each other. The inter-observer observations also showed significant differences in the measurements of the ZmL-ZmR and Zyo-Zyo categories (p < 0.05). With the exception of the Cdl-Me (Rt), ZmL-ZmR, Zyo-Zyo categories, the average differences between the two observers were within 2 mm, but the ZmL-ZmR and Zyo-Zyo values differed greatly with values of 8.10 and 19.8 mm respectively. Conclusion: In general, 3D CT images showed greater accuracy and reproducibility, with the exception of suture areas such as Zm and Zyo, than regular cephalograms in orthodontic measurements, showing differences of less than 2 mm, therefore 3D CT images can be useful in cephalometric measurements and treatment planning.

• Imaging Science in Dentistry
• /
• 제51권3호
• /
• pp.279-290
• /
• 2021

Purpose: Using images in the facial image comparison process poses a challenge for forensic experts due to limitations such as the presence of facial expressions. The aims of this study were to analyze how morphometric changes in the face during a spontaneous smile influence the facial image comparison process and to evaluate the reproducibility of measurements obtained by digital stereophotogrammetry in these situations. Materials and Methods: Three examiners used digital stereophotogrammetry to obtain 3-dimensional images of the faces of 10 female participants(aged between 23 and 45 years). Photographs of the participants' faces were captured with their faces at rest (group 1) and with a spontaneous smile (group 2), resulting in a total of 60 3-dimensional images. The digital stereophotogrammetry device obtained the images with a 3.5-ms capture time, which prevented undesirable movements of the participants. Linear measurements between facial landmarks were made, in units of millimeters, and the data were subjected to multivariate and univariate statistical analyses using Pirouette^® version 4.5 (InfoMetrix Inc., Woodinville, WA, USA) and Microsoft Excel^® (Microsoft Corp., Redmond, WA, USA), respectively. Results: The measurements that most strongly influenced the separation of the groups were related to the labial/buccal region. In general, the data showed low standard deviations, which differed by less than 10% from the measured mean values, demonstrating that the digital stereophotogrammetry technique was reproducible. Conclusion: The impact of spontaneous smiles on the facial image comparison process should be considered, and digital stereophotogrammetry provided good reproducibility.

• The Journal of Advanced Prosthodontics
• /
• 제8권5호
• /
• pp.354-362
• /
• 2016

PURPOSE. The trueness and precision of acquired images of intraoral digital scanners could be influenced by restoration type, preparation outline form, scanning technology and the application of power. The aim of this study is to perform the comparative evaluation of the 3-dimensional reproducibility of intraoral scanners (IOSs). MATERIALS AND METHODS. The phantom containing five prepared teeth was scanned by the reference scanner (Dental Wings) and 5 test IOSs (E4D dentist, Fastscan, iTero, Trios and Zfx Intrascan). The acquired images of the scanner groups were compared with the image from the reference scanner (trueness) and within each scanner groups (precision). Statistical analysis was performed using independent two-samples t-test and analysis of variance (${\alpha}=.05$). RESULTS. The average deviations of trueness and precision of Fastscan, iTero and Trios were significantly lower than the other scanners. According to the restoration type, significantly higher trueness was observed in crown and inlay than in bridge. However, no significant difference was observed among four sites of preparation outline form. If compared by the characteristics of IOS, high trueness was observed in the group adopting the active triangulation and using powder. However, there was no significant difference between the still image acquisition and video acquisition groups. CONCLUSION. Except for two intraoral scanners, Fastscan, iTero and Trios displayed comparable levels of trueness and precision values in tested phantom model. Difference in trueness was observed depending on the restoration type, the preparation outline form and characteristics of IOS, which should be taken into consideration when the intraoral scanning data are utilized.