• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.1
• /
• pp.13-18
• /
• 2004

This study was designed to establish working range for reoportable range in own laboratory in order to cover the upper and lower limits of the range in test method. We experimented ten times during 10 days for setting of reportable range with between run for method evaluation. It is generally assumed that the analytical method produces a linear response and that the test results between those upper and lower limits are then reportable. CLIA recommends that laboratories verify the reportable range of all moderate and high complexity tests. The Clinical Laboratory Improvement Amendments(CLIA) and Laboratory Accreditation Program of the Korean Society for Laboratory Medicine states reportable range is only required for "modified" moderately complex tests. Linearity requirements have been eliminated from the CLIA regulations and from others accreditation agencies, many inspectors continue to feel that linearity studies are a part of good lab practice and should be encouraged. It is important to assess the useful reportable range of a laboratory method, i.e., the lowest and highest test results that are reliable and can be reported. Manufacturers make claims for the reportable range of their methods by stating the upper and lower limits of the range. Instrument manufacturers state an operating range and a reportable range. The commercial linearity material can be used to verify this range, if it adequately covers the stated linear interval. CLIA requirements for quality control, must demonstrate that, prior to reporting patient test results, it can obtain the performance specifications for accuracy, precision, and reportable range of patient test results, comparable to those established by the manufacturer. If applicable, the laboratory must also verify the reportable range of patient test results. The reportable range of patient test results is the range of test result values over which the laboratory can establish or verify the accuracy of the instrument, kit or test system measurement response. We need to define the usable reportable range of the method so that the experiments can be properly planned and valid data can be collected. The reportable range is usually defined as the range where the analytical response of the method is linear with respect to the concentration of the analyte being measured. In conclusion, experimental results on reportable range using concentrated control sample and zero calibrators covering from highest to lowest range were salicylate $8.8{\mu}g/dL$, phenytoin $0.67{\mu}g/dL$, phenobarbital $1.53{\mu}g/dL$, primidone $0.16{\mu}g/dL$, theophylline $0.2{\mu}g/dL$, vancomycine $1.3{\mu}g/dL$, valproic acid $3.2{\mu}g/dL$, digitoxin 0.17ng/dL, carbamazepine $0.36{\mu}g/dL$ and acetaminophen $0.7{\mu}g/dL$ at minimum level and salicylate $969.9{\mu}g/dL$, phenytoin $38.1{\mu}g/dL$, phenobarbital $60.4{\mu}g/dL$, primidone $24.57{\mu}g/dL$, theophylline $39.2{\mu}g/dL$, vancomycine $83.65{\mu}g/dL$, valproic acid $147.96{\mu}g/dL$, digitoxin 5.04ng/dL, carbamazepine $19.76{\mu}g/dL$, acetaminophen $300.92{\mu}g/dL$ at maximum level.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.273-285
• /
• 2009

Statement of problem: The aim of dental research is to advance scientific knowledge and leads to improvement in the treatment and prevention of dental disease. Utilizing an effective research design and adequate statistical methods are essential procedures ensuring that the results of researches are based on evidences. A research should utilize proper statistical methods without statistical errors; Otherwise, it could adversely affect clinical practice and future research. Purpose: This study was made to investigate the statistical methods used in the Journal of Korean Academy of Prosthodontics (JKAP) and then to assess them for the statistical errors. Material and methods: Among the total of 399 articles in the JKAP published from 2000 to 2006, 292 articles using statistics were reviewed. The validity of the statistical methods used in them were assessed using a checklist based on the guideline for statistical reporting in the uniform requirements for manuscripts submitted to biomedical journals by International Committee of Medical Journal Editors. The checklist consisted of three categories of statistical errors: 1) Unspecified computer statistical packages, 2) Inadequate description of statistical methods, 3) Misuse of statistical terms. Then, the results were compared between the Korean version and the English version in the JKAP. Results: Among the 212 articles using statistics in the Korean version, 115 articles (54%) and among the 80 articles using statistics in the English version, 47 articles (59%) were shown to have unspecified computer statistical packages without statistically significant difference (P = .66). Likewise, 101 articles (48%) in the Korean version and 25 articles (31%) in the English version were shown to have the inadequate description of statistical methods without statistically significant difference (P = .09). However, 114 articles (54%) in the Korean version and 19 articles (24%) in the English version were shown to have the misuse of statistical terms with statistically significant difference (P = .01). Conclusion: Some of the articles in the JKAP had inadequate statistical validity, given the statistical errors identified in this assessment. Hence, dental researchers should be more careful when it comes to describing and applying statistical methods.

• Korean journal of communication and information
• /
• v.57
• /
• pp.202-226
• /
• 2012

The purpose of this study is to analyze how Chinese people perceive the acceptance and spread of Korean popular culture through the analysis of the Korean Wave news frame in Chinese daily newspapers. The result of analysis showed that there was a significant difference in the number of an article appearance in all three daily newspapers by year according to a specific issue including the popularity of Korean Wave-related events, Korean dramas, movies and Korean stars. This reporting trend also appeared in the article format, and all three daily newspapers mainly used an episodic frame to deliver fragmentary Korean Wave trend or personal information emotionally rather than a thematic frame to analyze and interpret the Korean Wave trend in depth. As a result of analyzing dominant news frames using the inductive approach to examine specific contents of the articles, news frames that composed the Korean Wave into the cultural interest frame as 'Interest and attention toward Korean popular culture' and gave positive evaluations were dominant, followed by the economic news frames that explained the Korean Wave from the economic perspective and the political news frames that considered the Korean Wave from the viewpoint of the Chinese Government. These news frames appeared somewhat different according to the publishing purpose of daily newspapers. ${\ll}$People's Daily${\gg}$ which is the official organ of the Chinese Communist Party often covered the political frames to report the policies of Chinese government, ${\ll}$People's Daily (Overseas edition)${\gg}$ often covered economic frames from the overseas perspective and the Jinghua Daily which is a commercial newspaper by nature often handled cultural interest frames to consider Korean Wave as new cultural phenomenon.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Journal of Korean Public Health Nursing
• /
• v.13 no.1
• /
• pp.97-113
• /
• 1999

To investigate the actual condition of the adult-smoking in Chinan County. I used self-reporting questionnaires among 923 residents living in nine districts selected at random among the sites of eleven eup-myons from December 28. 1998 to January 6. 1999. collected data and analyized using SPSS. The smoking rate of adults in Chinan County was $36.9\%$. There was a significant difference in smoking rate according to the age. gender, education and job among general characteristics. The smoking rate in group of above 40s was about $40\%$ and that of the male took $55.5\%$ which was higher than that of female and the smoking rate of the people having high-school education was the highest$(46.2\%)$. With regard to the career. the smoking rate of the farmers ranked first$(46.1\%)$. Therefore anti-smoking business for smokers should be focused on above 40 years old, males. people having high school education and farmers. As the result of the survey of smoking habits of 340 people who smoke currently, the average smoking begining age was 21.8 and $81.5\%$ among them was between 16-25 years old. $4.4\%$ was under 15. during around the elementary school. Most motives to smoke were as followed; curiosity or taste$(33.6\%)$, relief of stress $(31.2\%)$, peer presure$(26.5\%)$ And considering the amount of the cigarette which is smoked per day, the case which is less than a pack of cigarettes was highest as $75.5\%$ and the people who smoke over one pack of cigarettes took $24.5\%$. As for the kind of tobacco which is smoked, how to smoke and the desire for the smoking, most case was toxin was moderate$(47.8\%)$ or mild$(46.9\%)$. shallowly$(49.0\%)$ or deeply$(46.3\%)$ and under stress$(33.4\%)$. after meals$(27.8\%)$, during drink$(15.7\%)$ and so on. The highest point marked among the factors of smoking motives was 'the reduce of negative emotion' $(3.27\pm1.00)$. followed by 'uncomfortable habits' $(2.87\pm1.02)$, 'addiction' $(2.84\pm1.06)$. 'habit' $(2.74\pm1.12)$. 'pleasure' $(2.70\pm1.04)$. 'stimulus' $(2.59\pm.90)$, 'sensation-exercise satisfaction' $(2.42\pm.97)$. Smokers smoke to reduce the negative emotions when angry in most common case. depressed. anxious. uncomfortable. lone. ashamed or embarrased. and intend to solve the certain problem. etc. Other motives are uncomfortable habit. addiction. habit. pleasure and the pursuit of stimulus. The level of nicotine dependence of adults m Chinan County was 10.57 which amount to 'high' wholly. As the resulf of the level of nicotine dependence score. the people who are low in the level of nicotine was $33.5\%$. the people who are high was $48.2\%$. very high was $18.4\%$. The approach for anti-smoking for smokers should be conducted differently according to the level of the nicotine. For the people who are in low level of nicotin dependence the prohibition of the smoking should be guided through the approach to foster strong will. for those who are in 'high' by acquiring proper method for the prohibition of smoking. and for those who are 'very high' the anti-smoking should be induced by providing proper program because of the possibility of the suffer from abstinence syndrome. The difference of the level of nicotine with the general characteristics of the objects had not statistically significant difference. The difference of the level of nicotine dependence accompanied by smoking habit had statistically significant difference according to the amount of smoke, the kind of tobacos. smoke inhale habit. In other words, the group of heavy smokers had higher level of the nicotine dependence than that of the light smokers relatively and the group which smoke strong taboaco has higher level of nicotine than that of which smoke mild or moderate. And the group of smokers who smoke deeply has higher level of nicotine than that who smoke shallowly or nonswallow. Aa a result of the analysis of the correlation between smoking motive factors and the level of nicotine, there was the indication that people who smoke for the decrease of the negative emotion. habit, pleasure. stimulus. sensation-exercise satisfaction had high level of the nicotine dependence. As the result of the anti-smoking will of smokers. $65.0\%$ of them had prohibition of smoking will. $29.3\%$ had no will to quit smoke. The most important reason for anti-smoking was health. $67.9\%$ had experience to try to quit smoke and the biggest reason to fail to quit smoking was the lack of the will power to keep anti-smoking. $52.8\%$ of them were advised to stop smoking from their spouses or children. only $2.8\%$ were by medical. The people who have the opinion to need anti-smoking education were $69.6\%$. Therefore when the business for the hygine of the mouth for adult is set. it should be centered on the people who have intention of prohibition of the smoking and help to quit smoking by way of other affirmative counter-program not smoking under stress.

• Journal of Korean Academy of Nursing
• /
• v.22 no.1
• /
• pp.49-67
• /
• 1992

Most hospitalized children will experience physical pain as well as psychological distress. Preschool children's pain perception related to painful procedures can increase due to elevated anxiety and fear because they do not have understanding logical of their disease and hospitalization. In particular, they are distressed about needle - related procedures which are feared because they are seen to be a cause of bodily damage. This descriptive study attempted to identify pain perception levels in preschool children and their mothers. A self-reporting measurement and behavioral observation were used to collect the data. A total of 25 hospitalized preschool children and their mothers were investigated and data were collected about 60 painful procedures. Data collection was carried out by the researcher and two trained investigators from November first to December tenth. Three insruments were used to collect the data : Faces Pain Rating Scale(FPRS) developed by Beyer was used to measure the degree of preschool children's pain perception about painful procedures. The Visual Analogue Scale(VAS) devised by Huskisson was used to assess the degree of mothers' pain perception about their children's painful procedures. A Pain Behavioral Checklist based on the Procedure Behavior Check List by LeBaron and Zelter and modified by the researcher was used to observe behaviors of preschool children, their mothers, and nurses when the painful procedures took place. The data were analyzed by an SPSS program, and were tested using real numbers, percentages, Pearson correlation coefficient, t-test, and ANOVA. The results of this study are as follows : 1. Of all the painful procedures, the mean score for the FPRS for the preschool children's pain perception was 4.02 points, and the mean score for the VAS of mothers' pain perception was 10.92 points. 2. A Positive correlation which was statistically significant was found between the pain perception of preschool children and their mothers (r＝.53, p＜.01). that is, the higher the children's pain perception was, the higher their mothers' pain perception was. 3. The characteristics of the painful procedures related with children's pain perception as follows : The type of painful procedure was found to be statistically significant (F＝23.44, p＜.01), Among the three procedures Ⅳ starting was found to be perceived as the most painful procedures to the children. The greater the number of times that the procedure had been done, the higher the pain perception was (F＝4.44, p＜.01), and the longer the duration of the procedure, the higher the pain perception wa(r＝.30, p＜.05). Pain perception in the treatment room was higher than in the children's room(t＝6.30, ＜.01), pain perception in the mother's presence was the higher than when the mother was not present (t＝2.91, p＜.01). 4. The characteristics of the painful procedures related with the mothers' pain perception as follows : The type of painful procedure was found to be statistically significant(F＝6.01, p＜.01). Among the three procedures Ⅳ sampling was found to be perceived as the most painful procedures to the mothers. The greater the number of times that the procedure had been done, the higher the pain perception was (F＝5.95, p＜.01), and the longer the duration of the procedure, the higher the pain perception was (r＝.31, p＜.05). Pain perception in the treatment room was higher than in the children's room (t＝3.51, p＜.01), but pain perception in the mother's presence showed statistically significant no difference. 5. Of all of the 19 children's behaviors during the painful procedures, the most frequent behaviors observed Were as follows in order of frequency “crying”, “screamirig”, “facial grimacing”, “physical resistance”, Of all of the nine methers' behaviors, the most frequent by observed in “console children”, “hold children”, “applaud children”, Of all of the 11 nurses' behaviors during the painful procedures, the mast frequent in order were “smiling”, “physical restraint”, “console children”, “praise children”. 6. A positive correlation between children's and mothers' pain perception and children's behaviors was found to be statistically significant (r＝.65, p＜.01, r＝67, p＜.01). Also the relationship between children's and mothers' pain percertion, and mothers' behavior was found to be statistically significant (r＝.57, p＜. 01, 4＝.60, p＜.01). The relationship between children's pain perception and nurses' behaviors was also found to be statistically significant (r＝.46, p＜.01), but there was difference between mothers' pain perception and nurses' behaviors.

• Journal of Gastric Cancer
• /
• v.5 no.3 s.19
• /
• pp.174-179
• /
• 2005

Purpose: The 5-year survival rate is the most useful parameter for evaluating the effect of management on most malignant tumors. Recurrence after a curative resection for gastric cancer occurs mostly within 3 years of the operation, which caused us to evaluate whether a 3-year disease-free survival (3DFS) can be substituted for a 5-year overall survival (5OS). Materials and Methods: We reviewed the medical records of 656 consecutive patients who had undergone a curative resection for gastric cancer To assess whether 3DFS represents 5OS, we used a simple linear regression with survival probability calculated by using the survival function. Results: Recurrence was found in 175 cases during the follow-up periods. The accumulative frequencies of recurrence at postoperative 1 year, 3 years, and 5 years were 46% (81 cases), 89% (156 cases), and 97% (170 cases), respectively. The correlation coefficient (r) and the coefficient of determination $(r^2)$ between 3DFS and 5OS were 0.87 and 0.76, respectively, and the regression equation was $5OS=0.18+(0.80{\times}3DFS)$. The r and $R^2$ according to the type of recurrence were 0.89 and 0.80 in peritoneal seeding, 0.88 and 0.78 in hematogeneous metastasis, and 0.86 and 0.73 in local recurrence, respectively. The r (0.77) and $r^2$ (0.60) were relatively lower in low stages (stage I and II) compared to r (0.88) and $r^2(0.77)$ in high stages (stage III and IV). Conclusion: The 3DFS is an excellent predictor of 5OS. Therefore, if we use the former as the treatment evaluating method, 2-year time reduction in assessing and reporting treatment results is expected.

• Culinary science and hospitality research
• /
• v.21 no.4
• /
• pp.284-293
• /
• 2015

This study was intended to investigate food, exercise habits, perception of health status and the effects of nutrient intake of female college students. Food habits such as regularity of meal time, repast of breakfast, numbers of night snack per week and duration of meal were assessed via a self reporting questionnaire, and 24hrs recall method for nutrient intake was obtained from 155 female college students in Yangju-si. The mean height and weight of the subjects were $161.25{\pm}3.52cm$ and $52.26{\pm}4.52kg$, respectively. The average intakes of energy and nutrients were below the Korea recommended dietary allowance(RDA). Especially, The nutrient intakes(energy, protein, fat, fiber, calcium, iron, phosphorus, zinc, sodium, potassium, vitamin B6, niacin, vitamin C, folate, vitamin E, cholesterol) of the group in which the regularity of meal time per week was 5~7 days was significantly higher than the group in which the regularity of meal time was < 3 days (p<0.005). The nutrient intakes influenced by the food habit such as the regularity of meal time, skipping breakfast, and the numbers of night snack per week but did not differ in accordance with the regular exercise habits and perception of health status. These findings suggest that nutritional education based on female college students' food habits(regularity of meal time, skipping breakfast and night snacks per week, and duration of meal) may be required to improve dietary variety. It is considered that the improvement in dietary habits will contribute to the improvement of nutrition.

• Management & Information Systems Review
• /
• v.36 no.3
• /
• pp.151-165
• /
• 2017

This study investigates the effect of revenue recognition by percentage of completion method on financial analysts' earnings forecasting information in order industry. Specifically, we examines how the analysts' earnings forecast errors and biases differ according to whether or not to report the unbilled revenue account balance and the level of unbilled revenue account balance. The sample consists of 453 firm-years listed in Korea Stock Exchange during the period from 2010 to 2014 since the information on unbilled revenue accounts can be obtained after the adoption of K-IFRS. The results are as follows. First, we find that the firms with unbilled revenue account balances have lower analysts' earnings forecast accuracy than the firms who do not report unbilled revue account balances. In addition, we find that the accuracy of analysts' earnings forecasts decreases as the amount of unbilled revenue increases. Unbilled revenue account balances occur when the revenue recognition of the contractor is faster than the client. There is a possibility that managerial discretionary judgment and estimation may intervene when the contractor calculates the progress rate. The difference between the actual progress of the construction and the progress recognized by the company lowers the predictive value of financial statements. Our results suggest that the analysts' earnings forecasts may be more difficult for the firms that report unbilled revenue balances as applying the revenue recognition method based on the progress criteria. Second, we find that the firms reporting unbilled revenue account balances tend to have higher the optimistic biases in analysts' earnings forecast than the firms who do not report unbilled revenue account balances. And we find that the analysts' earnings forecast biases are increases as the amount of unbilled revenue increases. This study suggests an effort to reduce the arbitrary adjustment and estimation in the measurement of the progress as well as the introduction of the progress measurement method which can reflect the actual progress. Investors are encouraged to invest and analyze the characteristics of the order-based industry accounting standards. In addition, the results of this study empower the accounting transparency enhancement plan for order industry proposed by the policy authorities.

• Management & Information Systems Review
• /
• v.39 no.3
• /
• pp.1-16
• /
• 2020

The current tariff return system requires tax officials to calculate tax amount by themselves and pay the tax amount on their own responsibility. In other words, in principle, the duty and responsibility of reporting payment system are imposed only on the taxee who is required to calculate and pay the tax accurately. In case the tax payment system fails to fulfill the duty and responsibility, the additional tax is imposed on the taxee by collecting the tax shortfall and imposing the tax deduction on For this reason, item classifications, together with tariff assessments, are the most difficult and could pose a significant risk to entities if they are misclassified. For this reason, import reports are consigned to customs officials, who are customs experts, while paying a substantial fee. The purpose of this study is to classify HS items to be reported upon import declaration and to indicate HS codes to be recorded on import declaration. HS items were classified using the attached image in the case of item classification based on the case of the classification of items by the Korea Customs Service for classification of HS items. For image classification, CNN was used as a deep learning algorithm commonly used for image recognition and Vgg16, Vgg19, ResNet50 and Inception-V3 models were used among CNN models. To improve classification accuracy, two datasets were created. Dataset1 selected five types with the most HS code images, and Dataset2 was tested by dividing them into five types with 87 Chapter, the most among HS code 2 units. The classification accuracy was highest when HS item classification was performed by learning with dual database2, the corresponding model was Inception-V3, and the ResNet50 had the lowest classification accuracy. The study identified the possibility of HS item classification based on the first item image registered in the item classification determination case, and the second point of this study is that HS item classification, which has not been attempted before, was attempted through the CNN model.