• International Journal of Advanced Culture Technology
• /
• v.7 no.4
• /
• pp.40-48
• /
• 2019

Indoor gardens tailored to suit individual tastes offer a place to enjoy plants and to relax to city dwellers to relieve stress from city life. However, there are technical issues to build such indoor gardens. To offer solutions to technical issues, this study aims to analyze development phases of indoor garden-related technologies by studying available patents in detail. Also, the study aims to understand current status and future direction of technologies by examining technological trends for introduction of indoor gardens. Brainstorming method was used to understand technology trends and as a result, two groups were identified for technical features of indoor gardens: indoor greening technology and rest area for users. An analysis on selected patents showed that the number of patents increased until 2010 and declined gradually afterwards. Korea ranked the highest in the number of patents grant followed by USA, Japan and Europe. Similar order was observed with the number of patents granted by nationality of applicants. The number of patents granted by nationality was the highest for Korean nationals. For indoor greening technologies, patents related to structure from 2007 were mostly concentrated in the areas of irrigation control and environment control for plants and vegetation. For rest area related technologies, patent related to structure showed a repetitive pattern of increasing and decreasing, but overall, on downtrend. For further development and dissemination of indoor gardening technology, more R&D work is needed with focus on environmental control technology for designing suitable environment for both human and plant.

• Journal of KIBIM
• /
• v.9 no.3
• /
• pp.8-18
• /
• 2019

Precast concrete manufacturing has proved economies of scale through the repetitive production by means of standardization, automation, and prefabrication. Advanced digital design and fabrication technologies can empower its benefits by enabling mass customization in the building design and construction. This study analyzed five case studies in terms of 1) design intent and background, 2) module development and facade construction, 3) integrated process among project stakeholder. This article has attempted to establish the following three points in conclusion: 1) Form generating digital design tools such as Rhino, CATIA, Generative Component, and Digital Project were implemented to produce parametric surface pattern and rationalization to maximize existing precast manufacturing benefits. Also, BIM program has been used to promote coordination and communication among engineering consultants and contractors, 2) In addition to traditional precast concrete materials, GFRC, RFP, brick cladding precast and 3D printed mould have been introduced to reduce the weight and cost and to comply the code from the zoning, seismic, and fireproof requirements, 3) Design-assist contract, design-assist financial support, and co-location measures have been introduced to facilitate collaboration between architect, fabricator, and contractor from the beginning of the project.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.5
• /
• pp.950-968
• /
• 2020

This study derives the modern characteristics of the paisley ornament through an analysis of the paisley ornament shown in fashion since the 2010s based on a theoretical review of the paisley ornament used in Kashmir India shawls for artistic inspiration in the fashion-textile field. It classified the paisley ornament in fashion since the 2010s into types of 'basic structure of body and coif', 'abnormal paisley ornament shapes', 'complex structure of paisley ornament', 'complex structure with other motif', 'a pair of symmetrical reflection motif', 'regular of repetitive arrangement', 'complex arrangement of irregularity and regularity' and 'free arrangement of irregularity'. A comparative analysis with the historical paisley ornament shows that paisley ornaments have contemporary characteristics like 'Bisector structure of centerline in criterion of the body', 'Composite structure of extended 1-repeat', and 'Free structure of engineered placement'. A modern design was inspired by the historical art forms; however, it was used in free utilization of motifs and patterns in terms of size, direction, proportion and space. These were the expression of a design identity that originated from the aesthetic ability and career of a designer as well as the technology of computer programs for the improvements in time and cost efficiency.

• Earthquakes and Structures
• /
• v.23 no.1
• /
• pp.13-21
• /
• 2022

Masonry constructions exhibit uncertain behaviors under dynamic effects such as seismic action. Complex issues arise in the idealization of structural systems of buildings having different material types and mechanical properties. In this study, the structural behavior of a vaulted masonry building constructed using full clay brick and lime-based mortar and sitting on consecutive arches was investigated by experimental and numerical approaches. The dimensions of the structure built in the laboratory were 391 × 196 cm, and its height was 234 cm. An incremental repetitive loading was applied to the prototype construction model. Along the gradually increasing loading pattern, the load-displacement curves of the masonry structure were obtained with the assistance of eight linear displacement transducers. In addition, crack formation areas, and relevant causes of its formation were determined. The experimental model was idealized using the finite element method, and numerical analyses were performed for the area considered as linear being under similar loading effect. From the linear analyses, the displacement values and stress distribution of the numerical model were obtained. In addition, the effects of tie members, frequently being used in the supports of curved load-bearing elements, on the structural behavior were examined. Consequently, the experimental and numerical analysis results were comparatively evaluated.

• (The)Study of the Eastern Classic
• /
• no.37
• /
• pp.279-306
• /
• 2009

This study is purposed to observe conventional expression of Hangul Ganchal. The conventional expression of Hangeul Ganchal had set a pattern from 16th century to 17the century after establishing its regular form. It is mainly found in the introduction and the conclusion of the letters. Especially, they are concretely shown at an address form and greeting in the former, a farewell and the close in the latter. Generally, a native tongue was often used in address form at Suncheon Kim's Eongan in 16th century and Hyun-Poong Kwak's Eongan in 17th century. However, a Chinese character was commonly found in the introduction at Jingbo-Eongan-Dok in 19th century. Specifically, in case of response, the conventional expression of 'read your letter' was added in greeting part. In Suneon of 16th century, this type was gradually established to the form, and in Hyuneon of 17th century, a native tongue set a pattern. However, Jingeon of 19th century, a Chinese character was mainly used instead of a native tongue. The changing form of farewell and the close showed similar pattern as the aspect of greeting form. They seemed to be more simple and repetitive in Hyuneon compared with the form of Suneon. Furthermore, a Chinese character was dominated in the conclusion of letters in Jingeon. Consequently, the paper examined the two types of letter between Hangul letters and Chinese character letters were strongly associated with each other. It is expected that more details research will be coped with next study.

• Journal of Biomedical Engineering Research
• /
• v.19 no.4
• /
• pp.393-401
• /
• 1998

Based on clinical observations, it is suspected that the bone-tendon origin is the site where piratical failure, leading to pathophysiological changes in the humeral epicondyle after repetitive loading, is initiated Mechanical properties and failure patterns of the common extensor and flexor tendons of the humeral epicondyle under static and repetitive loading have not been well documented. Our goal was to determine mechanical properties of failure strength and strain changes, to correlate strain changes and the number of cyclic repetitions, and to identify the failure pattern of bone-tendon specimens of common extensor and flexor tendons of the humeral epicondyle. Mechnaical properties of human cadaver bone-tendon specimens of the common extensor and flexor tendons of the humeral epicondyle were tested under two different loading rates. No statistically significant difference in ultimate tensile strength was found between male and female specimens or between slow (10 mm/sec) and fast elongation (100 mm/sec) rates. However, a statistically significant difference in ultimate tensile strength between the common extensor (1190.0 N/$cm^2{\pm}$388.8) and flexor 1922.0 N/$cm^2{\pm}$764.4)tendons was found (p<0.05). When loads of 25%, 33%, and 41% of the ultimate tensile strength of their contralateral sides were applied, the number of cycles required to reach 24% strain change for the common extersor and flexor tendons were approximately 8,893, 1,907, and 410, respectively. The relationship between cycles and loads was correlated ($R^2$=0.46) Histological observation showed that complete or partial failure after tensile or cyclic loadings occurred at the transitional zone, which is the uncalcified fibrocartilage zone between tendon and bone of the humeral epicondyle. Sequential histological sections revealed that failure initiated at the upper, medial aspect of the extensor carpi radialis brevis tendon origin. Biomechanical and hstological data obtained in this study indicated that the uncalcified fibrocartilage zone at the bone-tendon origin of the common extensor and flexor tendons is the weak anatomical structure of the humeral epicondyle.

• Journal of Life Science
• /
• v.14 no.3
• /
• pp.521-524
• /
• 2004

This experiment was carried out to analyze genetic characteristics and to develop the breed specific DNA marker for Cheju-native horse. If this marker contains high repetitive sequences, it is possible to convert a RAPD marker of interest into a single-locus PCR marker called a sequence characterized amplified region(SCAR). Twenty six Cheju-native horse and Fifty thoroughbred genomic DNA were pooled and PCR. were accomplished using 800 random primers. Comparing the pooled DNA from Cheju-native horse and thoroughbred, we found 9 primers which identified markers present in the pooled DNA from breed but absent in the other breed. Among 9 random primers, 6 primers were thoroughbred specific and 3 primers were Cheju-native horse specific. Testing individual horse revealed that 5 marker showed the similar band pattern between Cheju-native horse and Thoroughbred. However, 4 marker were wholly absent in breed while present in the other breed. UBC $126_{3500bp}$, UBC $162_{500bp}$, and UBC $244_{1200bp}$ was detected only Thoroughbred and UBC $562_{560bp}$was detected Cheju-native horse, respectively. After determining of the cloned breed-specific fragment sequence, we designed the SCAR-primers and carried out PCR. Compared to random primer, RAPD-SCAR primer didn't show significantly higher specific band. However, RAPD analysis is useful for genetic characterization of Cheju-native horse.

• Journal of Environmental Health Sciences
• /
• v.34 no.2
• /
• pp.137-147
• /
• 2008

This study evaluated the effects of the human activity and outdoor air on concentrations of size-selective particulate matters (PM) by conducting a realtime measurement in classrooms and on roofs at 4 elementary schools, 3 middle schools and 3 high schools in Incheon City. PM concentrations featured repetitive pattern of increasing during break time (including lunch hours) and cleaning time while decreasing during class hours. This trend was more prominent with inhalable PM and PM10 than fine PMs (PM2.5, PM1.0). The indoor/outdoor (I/O) ratio of inhalable PM and PM10 exceeded 1 while that of fine PMs was close to or below 1. The PM2.5 (out)/PM10 (out) ratio stood at 0.59 (${\pm}0.16$) and the PM2.5 (in)/PM10 (in) ratio was 0.29 (${\pm}0.09$), suggesting that occupant activity had a greater effect upon coarse particles (PM10-PM2.5) than upon fine particles (PM2.5, PM1.0). The correlations between the indoor and the outdoor PM concentrations showed a stronger positive correlation for fine particles than that of coarse particles. The linear regression analysis of PM concentrations indoor and outdoor indicated a higher determinant coefficient ($r^2>0.9$), and consistency for fine particles than in case of coarse particles. In conclusion, the results of this study suggest that the indoor coarse particle concentration is more attributed to occupant activity and the indoor fine particle concentration is more influenced by outdoor air pollution.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.5 no.1 s.8
• /
• pp.15-21
• /
• 2005

Autism is characterized with an abnormality of reciprocal social relatedness and of communication development. Also, autistic children show repetitive and stereotypical behavior pattern and deficiency of endurance against change. Dental problems related to autism are self-injury and trauma from accidents. Sometimes self-injury is due to discomfort resulting from restoration and local anesthesia. Also, gingivitis and multiple caries are common because of poor oral hygiene. Autistic children are anxious about visual and auditory stimuli because they don't understand the dental procedure. If the face of any changes in their daily life, their behavior becomes uncontrollable. In a setting such as the outpatient office, an autistic child's uncontrollable behavior makes it difficult to carry out proper treatment. If they need treatment under general anesthesia, it is very difficult to manage them in a ward as they are severly anxious about being admitted to a hospital. Therefore it is necessary to treat these children according to a specific management program under general anesthesia in an outpatient office. This case study reports of a 14 year old autistic teenager who although became uncontrollable because of the pain from multiple caries and from anxiety of the dental treatment eventually received treatment under general anesthesia and under conscious sedation in an outpatient office.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.2
• /
• pp.147-154
• /
• 2007

This paper describes a 'gyro-mouse', which provides a new human-computer interface (HCI) for persons who are disabled in their upper extremities, for handling the mouse-click and mouse-move function. We adopted the artificial neural network to recognize a quick-nodding pattern of the disabled person as the gyro-mouse click. The performance of our gyro-mouse was evaluated by three indices that include 'click recognition rate', 'error in cursor position control', and 'click rate per minute' on a target box appearing at random positions. Although it turned out that the average error in cursor positioning control was 1.4-1.5 times larger than that of optical mouse control, and the average click rate per minute was 40% of the optical mouse, the overall click recognition rate was 93%. Moreover, the click rate per minute increased from 35.2% to 44% with repetitive trials. Hence, our suggested gyro-mouse system can be used to provide a new user interface tool especially for those persons who do not have full use of their upper extremities.