• 품질경영학회지
• /
• 제16권1호
• /
• pp.43-48
• /
• 1988

Most of silicone used for water repellent finish is MHP (methyl hydrodiene polysiloxane), which is formed by hydrolysis and condensation polymerization of MHD (methyl hydrodiene dichlorosilane: Me H Si $Cl_2$). The cross-linking theory explains the water repellent mechanism of MHP. The silicone finish on fiber could improve in handle, softness, abrasion resistance, soil repellency, tear strength and crease resistance, as well as water repellency. According to using method silicone-water repellent finishing agents, could be devided into air dry type and curing type. MHP is the typical curing type of water repellent finishing agent, and this type requires the curing temperature above $150^{\circ}C$ at least. High curing temperature is the very drawback of this curing type. For this reason, there has been global interest in the lowering of its temperature. The objective of this study is to investigate merits of alkali treatment for silicone finishing by ANOVA and LSD (least significant difference).

• 한국염색가공학회지
• /
• 제9권4호
• /
• pp.1-6
• /
• 1997

Water repellent finish was carried out using water repellent agent(AG-480), melamine resin(Sumitex Resin MK), and catalyst(Sumitex Accelerator ACX). PET/nylon fabrics were treated with melamine resin by pad-dry-cure method and subsequently washed and dried. Durable water repellency was controlled by the melamine resin and catalyst. Water repellency was tested by spray rating method and durability of water repellency were measured by launder-O-meter and pilling tester. The optimum conditions of durable water repellent finish for new synthetic fabric were as follows; concentration of water repellent finishing agent 20g/l; concentration of melamine & catalyst 0.5g/l; curing condition $160^{\circ}$ ${\times}$ 30sec. Water repellency after washing and rubbing is improved by melamine resin and catalyst.

• 환경위생공학
• /
• 제17권3호
• /
• pp.110-114
• /
• 2002

The repellent activity of methanol extracts from 8 aromatic medicinal plant species and a steam distillate against blood-starved Aedes aegypti (L.) females was laboratory examined by skin test and compared with that of N,N-diethyl-m-toluamide (deet). Reponeses varied according to Plant species. At a dose of $0.1mg/\textrm{cm}^2$, potent repellency against adult mosquitoes was obtained with extracts of Cinnamomum camphora (94.1 %) Cinnamomum cassia bark (91.2%), Eugenia caryophyllata flower bud (72.2%), and Tilia amurensis (69.4%). Repellent activity of these plant extracts was comparable to that of deet (83.4%). The plants described merit further study as potential mosquito-repellent agents.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권1호
• /
• pp.289-296
• /
• 2003

The evaluation on performance of gel type penetrative water-repellent for durability progress of concrete structure has carried out in this study. And liquid type waterproof agents have been estimated with same method. Also normal concrete that was not applied water-repellent and waterproof agents have been estimated. As results, the penetrative depth of gel type water-repellent were deeper than that of liquid type waterproof agents and those were superior to these in physical and durable performance.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.15-16
• /
• 2022

In order to examine the adhesion characteristics of road pavement according to environmental conditions, the freezing time of cement mortar and the adhesion performance between ice and pavement were evaluated depending on the presence or absence of polymer and water repellent. As a result of measuring the ice formation time, it was found that there was no delay when a polymer was added, but the complete freezing time was delayed when a water repellent was added. As a result of measuring the strength of ice adhesion, it was found that the bonding force between ice and the surface of the test body was greatly generated in the test body without water repellent. In the case of a test specimen to which a water repellent was added, it was found that the bonding strength between the test specimen surface and ice was reduced.

• 대한화장품학회지
• /
• 제41권3호
• /
• pp.209-218
• /
• 2015

파우더 베이스 메이크업 제품은 피부에 도포되어 8 ~ 12시간 동안 부착되며 피부에서 분비되는 땀이나 피지 등의 분비물에 의해 화장막이 변화된다. 따라서 메이크업 화장의 지속성은 중요한 품질 요소 중 하나이며 평가도 중요하다. 본 연구는 파우더 제품에서 지속성 평가를 위해 여러 가지 방법으로 파우더 반제품의 흡수, 흡유, 발수, 발유 등의 특성을 측정해보고 객관적인 평가 방법과 비교하여 연관성을 확인하여 지속성 평가 시 중요한 파우더의 특성을 살펴보았다. 또한 평가조건(땀과 피지 분비량 차이, 기온 및 습도 등)에 크게 영향을 받지 않으면서 지속성을 예측할 수 있는 간단한 방법을 검토해보았다. 타정 흡유도와 모세관법 및 침지법 등으로 반제품의 흡수, 흡유, 발수, 발유 특성을 측정해본 후 색차계와 ROBO skin analyzer 데이터와 비교하였다. 그 결과 흡수, 발유 특성보다는 흡유와 발수 특성이 지속성과의 연관성이 크다는 것을 확인할 수 있었고 흡유, 발수 특성을 확인하는 것으로 빠르고 손쉽게 지속성에 대한 예측이 가능하리라 생각되었다. 그 중 흡유 특성은 타정 흡유도와 모세관법이, 발수 특성은 침지법이 지속성에 대한 상대평가 방법으로 유용할 것이라고 판단되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권6호
• /
• pp.42-49
• /
• 2020

본 논문은 시멘트계 재료의 표면 및 구체에 소수성을 부여하여 내구성을 향상시키기 위한 기초연구이다. 실란/실록산계 혼합형 발수제를 첨가한 시멘트 모르타르를 제조하고 초기 수화성능 및 유동성능, 재령별 압축강도를 측정하였다. 또한 표면연마 전후의 물접촉각 및 흡수율을 측정하였다. 실란/실록산계 혼합형 발수제를 첨가한 시멘트 모르타르의 플로우는 발수제 첨가량 1.5%까지는 감소하는 것으로 나타났으며 첨가량 3.0%에서는 증가하였다. 실란/실록산계 혼합형 발수제를 첨가할 경우 시멘트 페이스트의 응결시간은 초결 및 종결 모두 지연되는 것으로 나타났다. 압축강도는 발수제의 최대 첨가량 3.0%에서 최대 30%까지 감소하는 것으로 나타났다. 실란/실록산계 발수제를 시멘트 모르타르에 첨가할 경우 접촉각은 커지는 것으로 나타났으며, 표면연마 후 접촉각은 표면연마 전보다 커지는 것으로 나타났다. 실란/실록산계 혼합형 발수제의 첨가는 표면뿐만 아니라 연마로 인하여 손상된 표면과 단면에서도 소수성을 나타내었다. 실란/실록산계 혼합형 발수제를 시멘트 모르타르에 첨가할 경우 흡수율은 낮아지는 것으로 나타났으며, 표면연마 후 흡수율은 표면연마 전보다 커지는 것으로 나타났다.

• 한국동물위생학회지
• /
• 제38권2호
• /
• pp.83-87
• /
• 2015

The exposure to house dust mites is closely connected with allergic diseases such as atopic dermatitis, allergic rhinitis and asthma. Control of house dust mite populations has been principally achieved by using chemical insecticides. But the risk to human health would be a potential problem. Moreover, house dust mite remain as allergens even after death. Therefore, repelling the house dust mites is more effective method than killing them. The use of plant-derived repellents has been considered as a promising alternative to chemical repellents. Eucalyptus oils are regarded as safe compounds, there have been attempts to commercialize and market the insecticides/repellent products containing Eucalyptus oil as such or based upon them. For that reason, we experimented repellent activity against these mites using laundry detergent with Eucalyptus oil in this experiment. House dust mites (Dermatophagoides farinae and Dermatophagoides pteronyssinus) were exposed at different concentrations (4, 8, 16, $32{\mu}L/mL$) in fabric treated laundry detergent with Eucalyptus oil for 24 hours. The repellent effects (%) of laundry detergent with Eucalyptus oil exposed at 4, 8, 16, and $32{\mu}L/mL$ were 48.16%, 74.62%, 52.67%, and 44.47%, respectively. These results suggest that laundry detergent with Eucalyptus oil have potential effect to repel the house dust mites.

• 한국생활과학회지
• /
• 제22권6호
• /
• pp.687-699
• /
• 2013

This study was carried out to investigate the antifungal activity and house dust mite repellent effect of cotton and silk fabrics dyed with Juniperus chinensis heartwood extracts by hot-water and methanol. The chemical composition of Juniperus chinensis heartwood extracts by hot-water and methanol was analyzed by GC-MS. In the case of antifungal activity, dyed fabrics with hot water extract had no effect against chaetomium globosum fungus. But showing no growth in fabrics dyed with methanol extract, dyed fabrics with methanol extract showed very excellent antifungal activity. Silk fabric dyed with methanol extract showed excellent house dust mite repellent effect of 94.3%~96.0% against dermatophagodes farinae. The composition of Juniperus chinensis heartwood extracts from hot-water and methanol was different. There were no terpene and its analogue peaks in hot-water extract. However there were terpene and its analogue peaks in methanol extract. From these GC-MS results, terpene was identified in methanol extract of Juniperus chinensis heartwood. Efficient ingredient of antifungal activity and house dust mite repellent effect was assumed terpene.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권1호
• /
• pp.78-82
• /
• 2017

Purpose: The purpose of this study is to evaluate failure characteristic and mechanism of four commercial water-repellent coatings for elevated temperature machinery applications. Method: Thermal degradation was performed for up to 64 thermal cycles. 1 cycle consists of 15 minute holding at 523K under 300rpm revolution and 15 minute-natural cooling. Contact angle was measured and microstructure of the coating layer was observed by using a scanning electron microscope. Results: Four kinds of commercial repellent coating showed hydrophobic or super-hydrophobic property implying that all coatings are suitable for room temperature application. Contact angle of three kinds of commercial coatings decreased rapidly after thermal exposure, while only one specimen having hydrophobic surface showed extremely slow degradation. Conclusion: Observed decrease in contact angle of the coatings were attributed to formation of macro-sized pores and disappearance of micro-protrusion during thermal exposure. Optimum water-repellent coating needs to be selected under the consideration of initial contact angle as sell as service temperature.