• Journal of Astronomy and Space Sciences
• /
• 제28권2호
• /
• pp.133-141
• /
• 2011

A satellite power system should generate and supply sufficient electric power to perform the satellite mission successfully during the satellite mission period, and it should be developed to be strong to the failure caused by the severe space environment. A satellite power system must have a high reliability with respect to failure. Since it cannot be repaired after launching, different from a ground system, the failures that may happen in space as well as the effect of the failures on the system should be considered in advance. However, it is difficult to use all the hardware to test the performance of the satellite power system to be developed in order to consider the failure mechanism of the electrical power system. Therefore, it is necessary to develop an accurate model for the main components of a power system and, based on that, to develop an accurate model for the entire power system. Through the power system modeling, the overall effect of failure on the main components of the power system can be considered and the protective design can be devised against the failure. In this study, to analyze the failure mode of the power system and the effects of the failure on the power system, we carried out modeling of the main power system components including the solar array regulator, and constituted the entire power system based on the modeling. Additionally, we investigated the effects of representative failures in the solar array regulator on the power system using the power system model.

• The Journal of Advanced Prosthodontics
• /
• 제10권2호
• /
• pp.101-112
• /
• 2018

PURPOSE. The purpose of this study was to investigate the effect of various surface treatments (ST) on the shear bond strength of resin composite to three bilayer dental ceramics made by CAD/CAM and two veneering ceramics. MATERIALS AND METHODS. Three different bilayer dental ceramics and two different veneering ceramics were used (Group A: IPS e.max CAD+IPS e.max Ceram; Group B: IPS e.max ZirCAD+IPS e.max Ceram, Group C: Vita Suprinity+Vita VM11; Group D: IPS e.max Ceram; Group E: Vita VM11). All groups were divided into eight subgroups according to the ST. Then, all test specimens were repaired with a nano hybrid resin composite. Half of the test specimens were subjected to thermocycling procedure and the other half was stored in distilled water at $37^{\circ}C$. Shear bond strength tests for all test specimens were carried out with a universal testing machine. RESULTS. There were statistically significant differences among the tested surface treatments within the all tested fracture types (P<.005). HF etching showed higher bond strength values in Groups A, C, D, and E than the other tested ST. However, bonding durability of all the surface-treated groups were similar after thermocycling (P>.00125). CONCLUSION. This study revealed that HF etching for glass ceramics and sandblasting for zirconia ceramics were adequate for repair of all ceramic restorations. The effect of ceramic type exposed on the fracture area was not significant on the repair bond strength of resin composites to different ceramic types.

• Molecular & Cellular Toxicology
• /
• 제1권2호
• /
• pp.111-115
• /
• 2005

Ultraviolet (UV) radiation to mammalian skin is known to alter cellular function via generation of Reactive Oxygen Species (ROS), DNA damage and DNA lesions, such as pyrimidine dimmers and photoproducts, which could lead to DNA mutation if they are not repaired. In this study, we have investigated the reduction of DNA damage and of apoptosis with a particular attention to genetic effect of paeoniflorin in Normal Human Epidermal Keratinocytes (NHEK). After UVB irradiation from $10\;to\;500mJ/cm^{2}$ to NHEK, Mean Tail Moments (MTM) were increased with UVB dose increase. The greatest amount of strand breaks was induced at $500mJ/cm^{2}$ of UVB. Even at the lowest dose of UVB ($10mJ/cm^{2}$), change in MTM was detected (P<0.0001). Pretreated cell with 0.1% paeoniflorin maximally reduced the level of DNA damage to about 21.3%, compared to untreated cell. In the lower concentrations less than 0.01% of paeoniflorin, MTM had a small increase but paeoniflorin still had reductive effects of DNA damage. We measured the apoptosis suppression of paeoniflorin with annexin V flous staining kit. As we observed under the fluorescence microscopy to detect apoptosis in the irradiated cell, the fluorescence intensity was clearly increased in the untreated cell, but decreased in treated cells with paeoniflorin. These results suggest that paeoniflorin reduces the alteration of cell membranes and prevents DNA damage. Therefore, the use of paeoniflorin as a free radical scavenger to reduce the harmful effects of UV lights such as chronic skin damage, wrinkling and skin cancer can be useful to prevent the formation of photooxidants that result in radical damage.

• Journal of Oral Medicine and Pain
• /
• 제22권1호
• /
• pp.65-80
• /
• 1997

Cytochrome P450 is an oxidase involved in oxidation of alcohol and is known to be an activator of carcinogen. The present study was perfomed to analyze the effect of diabetes and cold stress on the expression of Cytochrome P450 IIE1(CYPIIE1) in the liver and salivary glands in rats by an immunoblot analysis. Sixty three divided into 4 groups; 1) 20 rats belonging to group I were allowed diabetes (40mg/kg. I.V.) 2) 20 rats of group II were bathed in cold water for 30 seconds twice a day 3) 20 rats comprising group III were received diabetes and cold stress as described above 4) 3 rats of group IV were selected as a control. The rats were sacrificed at the end of the same day 1, 2, 3, 4 weeks experiment. The liver and parotid glands were removed and stored at $-70^{\circ}C$ until use. The stored organs were homogenized for 10 seconds and the supernatants were obtained by centrifugation. The proteins of the supernatants were separated by sodium dodecyl sulfate- polyacrylamide gel electrophoresis and subjected to Western blotting. The blotted membranes were incubated with polyclonal antibodies to CYPIIE1. And sepimens were observed with light microscope also under the Hematoxillin-Eosin staining. The obtained results were as follows : 1. In diabetes group, acini had changed to degeneration severely 1 week experiment, but repaired gradually in lapse of time. 2. In diabetes group, septal connective tissue had changed to degeneration little by little from 1 week after experiment, and progressed severely in lapse of time. 3. In stress group, acini had not changed remarkably, but slightly separated each other 3 weeks after experiment. 4. In diabetes and stress group, histological feature had changed remarkably campare with in the group of diabetes only. 5. In all experimental group, CTPIIE1 had expressed remarkably in the liver tissue, but not in the parotid gland tissues. 6. In diabetes and stress group, CYPIIE1 had expressed remarkably campare with in the group of diabetes only.

• 동국한의학연구소논문집
• /
• 제5권
• /
• pp.131-147
• /
• 1996

This study was investigated to define effect of pretreatment of Oryungsan on hepatotoxicity induced by $CCl_4$ in rat. The experimental anmals were divided into normal group, control group, sample group, and sample group were divided sample1, sample2, sample3. Control group were injected diluted carbon tetrachloride and olive oil, $1m{\ell}/kg$ to intraperitoneal after 8th day. Sample group were injected Oryungsan water extracts, $0.33m{\ell}/kg/day$ to intraperitoneal of sample group1, $0.66m{\ell}/kg$ day to sample group2, $1.32m{\ell}/kg/day$ to sample group 3 each other for 7day, and injected the dosage of $CCl_4$ was $1.0m{\ell}/kg$ diluted 1 : 1 with olive oil after 8th day. The following results were made by observation GOT, GPT, Albumin, Globulin, Bile acid, hepatic tissue. 1. The serum GOT and GPT level of sample group were decreased. Sample group 1 were decreased significantly. 2. The serum A/G ratio of sample group was increased as compared with normaI group. 3. The serum bile acid of sample group was decreased significantly. 4. The destruction of hepatic tissue were repaired as compared with control group. These results demonstrated that oryungsan can be attributed to recovery from hepatotoxicity.

• 동의생리병리학회지
• /
• 제20권4호
• /
• pp.909-913
• /
• 2006

The antioxidative activity was observed in the ethyl acetate extract $(IC_{50},\;119{\pm}0.16\;{\mu}g/mL)$ from Pueraria thunbergiana. The DPPH radical scavenging effect of this extract was comparable with that of synthetic antioxdant, BHA $(IC_{50},\;88.39{\pm}1.1\;{\mu}g/mL){\times}\;10^{-3}\;{\mu}M$. Pueraria thunbergiana extracts against microorganisms were evaluated in terms of the minimum inhibitory concentrations (MIC). In general, C. albicans was stronger antimicrobial activity than the other microorganisms. in vitro the antitoxic activity of extracts of Pueraria thunbergiana on NIH 373 fibroblasts was evaluated by the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazoliumbromide) method. Generally, detoxification effect by the extracts of Pueraria thunbergiana increased in proportion to the concentrations. When $10\;{\mu}g/mL$ of the hexane extract of Pueraria thunbergiana was treated it showed the highest antitoxic effects (p<0.01). These results suggest that the crude extract of P. thunbergiana has a potential therapeutic activity.

• 약학회지
• /
• 제50권4호
• /
• pp.220-227
• /
• 2006

The therapeutic effect of tissue cultured root of mountain ginseng (Panax ginseng) (tcMG) on 2,3,7,8-tetrachlorodaibenzo-p-dioxin (TCDD) induced toxicity in rat was investigated. The rats were assigned into three groups (10 rats/group), control, TCDD exposed group and tcMG treated group after TCDD exposed. $50\;{\mu}g/kg$ of TCDD was injected by i.p. for TCDD exposed group and 30 mg/kg of tcMG saponin was administered for 4 weeks by oral gavage for tcMG treated group. The weights of body, spleen, kidney, thymus, testes and epididymides were decreased in the single TCDD treatment. However these organs was significantly recovered by tcMG saponin except thymus (p<0.05). tcMG decreased the level of hepatic demage maker enzymes, AST and ALP. It also lowered total cholesterol and triglyceride. The level of serum triglyceride was significantly decreased in tcMG saponin treated group compared with the control. Histopathological examination revealed morphological change in the liver spleen, thymus and testes of TCDD treated rats. However they were relatively well preserved in the tcMG treatment group. In conclusion, TCDD induced toxicity was some repaired by tcMG. tcMG may be useful for prevention and treatment of TCDD induced toxicity.

• Advances in concrete construction
• /
• 제7권3호
• /
• pp.151-166
• /
• 2019

This paper introduces a new efficient analytical method, based on shear deformations obtained with 2D elasticity theory approach, to perform an explicit closed-form solution for calculation the interfacial shear and normal stresses in plated RC beam. The materials of plate, necessary for the reinforcement of the beam, are in general made with fiber reinforced polymers (Carbon or Glass) or steel. The experimental tests showed that at the ends of the plate, high shear and normal stresses are developed, consequently a debonding phenomenon at this position produce a sudden failure of the soffit plate. The interfacial stresses play a significant role in understanding this premature debonding failure of such repaired structures. In order to efficiently model the calculation of the interfacial stresses we have integrated the effect of shear deformations using the equilibrium equations of the elasticity. The approach of this method includes stress-strain and strain-displacement relationships for the adhesive and adherends. The use of the stresses continuity conditions at interfaces between the adhesive and adherents, results pair of second-order and fourth-order coupled ordinary differential equations. The analytical solution for this coupled differential equations give new explicit closed-form solution including shear deformations effects. This new solution is indented for applications of all plated beam. Finally, numerical results obtained with this method are in agreement of the existing solutions and the experimental results.

• The Journal of Advanced Prosthodontics
• /
• 제13권3호
• /
• pp.136-143
• /
• 2021

Purpose. This study aimed to evaluate the effect of repeated use of an implant handpiece under an implant placement torque (35 Ncm) and overloading torque condition (50 Ncm) on an output torque. Materials and Methods. Two types of implant handpiece systems (Surgicpro/X-DSG20L [NSK, Kanuma, Japan] and SIP20/CRB46LN [SAESHIN, Daegu, South Korea]) were used. The output torque was measured using a digital torque gauge. The height and angle (x, y, and z axes) of the digital torque gauge and implant handpiece were adjusted through a jig for passive connection. The experiment was conducted under the setting torque value of 35 Ncm (implant placement torque) and 50 Ncm (overloading torque condition) and 30 times per set; a total of 5 sets were performed (N = 150). For statistical analysis, the difference between the groups was analyzed using the Mann-Whitney U test and the Friedman test was used to confirm the change in output torque (α=.05). Results. NSK and SAESHIN implant handpieces showed significant differences in output torque results at the setting torques of 35 Ncm and 50 Ncm (P<.001). The type of implant handpiece and repeated use influenced the output torque (P<.001). Conclusion. There may be a difference between the setting torque and actual output torque due to repeated use, and the implant handpiece should be managed and repaired during long-term use. In addition, for successful implant results in dental clinics, the output torque of the implant handpiece system should be checked before implant placement.

• Advances in concrete construction
• /
• 제16권4호
• /
• pp.205-216
• /
• 2023

Concrete structures may become vulnerable during their lifetime due to several reasons such as degradation of their material properties; design or construction errors; and environmental damage due to earthquake. These structures should be repaired or strengthened to ensure proper performance for the current service load demands. Several methods have been investigated and applied for the strengthening of reinforced concrete (RC) structures using various materials. Fiber reinforced polymer (FRP) reinforcement is one of the most recent type of material for the strengthening purpose of RC structures. The main objective of the present research is to identify the behavior of reinforced concrete slabs strengthened with FRP bars by using near surface mounted (NSM) technique. Validation study is conducted based on the experimental test available in the literature to investigate the accuracy of finite element models using LS-DYNA to present the behavior of the models. A parametric analysis is conducted on the effect of FRP bar diameters, number of grooves, groove intervals as well as width and height of the grooves on the flexural behavior of strengthened reinforced slabs. Performance of strengthening RC slabs with NSM FRP bars was confirmed by comparing the results of strengthening reinforced slabs with control slab. The numerical results of mid-span deflection and stress time histories were reported. According to the numerical analysis results, the model with three grooves, FRP bar diameter of 10 mm and grooves distances of 100 mm is the most ideal and desirable model in this research. The results demonstrated that strengthening of reinforced concrete slabs using FRP by NSM method will have a significant effect on the performance of the slabs.