• 박물관보존과학
• /
• 제10권
• /
• pp.21-27
• /
• 2009

죽제조문필통은 직경 80mm정도의 통대 2개를 맞붙이고, 바닥에는"∞"모양의 가중나무 판재를 붙였다. 그리고 외부면에는 용과 구름, 사슴과 소나무 문양이 음·양각 기법으로 각각 정교하고 힘차게 조각되었다. 이 죽제조문필통은 일부가 파손, 결실 그리고 분해된 상태였지만 이번 보존수리를 통해 그 원형을 되찾게 되었다. 결실부에는 토분·호분·아교를 혼합하여 복원재료로 이용하였고, 원형을 되찾은 후 접합부분 안쪽에 얇은 비단 천을 부착하여 터짐을 방지하였다. 또한 복원된 표면은 옻칠을 이용해 고색처리를한것등 전통적인 재료와 수리기법을 응용한 가역적인 처리에 중점을 두었다.

• Journal of Chest Surgery
• /
• 제18권3호
• /
• pp.497-505
• /
• 1985

Bronchoplastic techniques represent the ideal surgical therapy for benign endobronchial tumors as well as tumors of low-grade malignant potential, such as bronchial adenomas, and for repair of traumatic airway injuries and benign strictures. This approach is also applicable to a select group of patients with carcinoma of the lung, with long-term survival being comparable to that achieved by standard pneumonectomy. Five bronchoplastic procedures were performed at Department of Thoracic and Cardiovascular Surgery, Seoul National University Hospital during 7 months periods from Dec. 1984 to Jun. 1985. Of the 5 patients, 3 patients were male and 2 patients were female and ages ranged from 8 years to 55 years old. The final diagnoses of 5 patients were as followed; traumatic bronchostenosis, endobronchial tuberculoma, carcinoid tumor, tuberculous bronchostenosis and traumatic bronchial fracture. Operative procedures of 5 patients were as followed; resection and end-to-end anastomosis of right main bronchus, left lower lobectomy and wedge resection of bronchus, left upper sleeve lobectomy, right middle and lower sleeve lobectomy and resection and end-to-end anastomosis of left main bronchus. And 2 lungs and 3 lobes could be preserved by these bronchoplastic procedures. There was no post-operative complication or mortality and all patients are being followed up without specific problem.

• Composites Research
• /
• 제12권3호
• /
• pp.26-35
• /
• 1999

복합재료내의 결함을 원공노치로 가정하고 노치의 크기에 따른 정하중 및 피로실험을 수행하였다. 원공이 존재하는 복합재료에 대하여 다양한 수리기법을 적용하여 정하중 실험을 수행하였다. 수리기법중에 precured double patched 방식과 cure-in-place 방식의 수리는 가장 우수한 결과를 보여 평활재의 약 60∼80%의 강도복구효과를 보였다. 우수한 결과기법을 나타낸 수리기법중에 보다 실제적인 방식이라고 사료되는 cure-in-place 방식으로 수리된 재료에 대하여 피로실험을 수행하였다. 수리된 재료는 정하중 및 피로의 경우에 있어서 향상된 결과를 보였으며 피로시 평활재의 거동을 나타낸다. 참고계수를 도입하여 회귀분석된 피로수명예측식(MFLPE's)은 수리된 시편에 비해 타 예측식에 비해 더 좋은 결과를 나타낸다.

• Structural Engineering and Mechanics
• /
• 제56권1호
• /
• pp.123-136
• /
• 2015

The proposed techniques to repair concrete members such as steel plates, fiber-reinforced polymers or concrete have important deficiencies in adherence and durability. The use of ultra high performance fiber concrete (UHPFC) can overtake effectively these problems. In this paper, the possibility of using UHPFC to strengthen reinforced concrete beams under torsion is investigated. Seven specimens of concrete beams reinforced with longitudinal and transverse reinforcements. One of these beams consider as control specimen while the others was strengthened by UHPFC on four, three, and two sides. This study includes experimental results of all beams with different types of configurations and thickness of UHPFC. As well as, finite element analysis was conducted in tandem with experimental test. Results reveal the effectiveness of the proposed technique at cracking and ultimate torque for different beam strengthening configurations, torque - twist graphs and crack patterns. The UHPFC can generally be used as an effective external torsional reinforcement for RC beams. It was noted that the behavior of the beams strengthen with UHPFC are better than the control beams. This increase was proportional to the retrofitted beam sides. The use of UHPFC had effect in delaying the growth of crack formation. The finite element analysis is reasonably agreement with the experimental data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.525-526
• /
• 2006

Recently, much research has been done and many improvements have been developed for islanding protection of distributed generation(DG). Anti-islanding protection for DG must be act very quickly to prevent equipment damage at the time of disconnection and for the safety of maintenance and repair personnel. DG-based detection methods have included both passive and active types, and now research has shifted towards new anti-islanding detection methods that make up for the defects of the previous types. Because differences occur between the utility grid and the DG when connecting and disconnecting depending on the phase difference, voltage, current, relative capacity of electric power, and system operation characteristics, voltage phase angle is an important consideration. In this paper, we simulated islanded operation characteristics comparing phase difference of DG and the connected utility grid, and analyzed various parameters (real power, reactive power, RMS voltage, RMS current, power factor angle, and frequency) by varying the DG's voltage phase angle. Using this information, we propose a suitable DG voltage phase angle for enhanced passive islanding detection techniques.

• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.63-70
• /
• 2015

PURPOSES: As a part of our research into repair techniques for roads that have collapsed as a result of a natural disaster, this study set out to find the optimum mix proportion for gravels to be used to restore a damaged area. METHODS: This study considered flow and strength-development characteristics. The experimental variables were the W/C ratio, the usage of the admixture, the types of cement, and the quantity of fine aggregate over three different experimental stages. The compressive strength was measured at 12 hours, one day, three days, and seven days. RESULTS : The flow varied with the amount of fine aggregate and the use of a high-range water-reducing (HRWR) admixture. The compressive strength also varied with respect to the type of cement and the W/C ratios. The strength satisfied the expected requirement of 21 MPa after one day, provided the mix proportion was appropriate. CONCLUSIONS: A gravel-filling high-flow cement-based mortar exhibited strength and consistency with a W/C ratio in the range of 0.40 to 0.45, assuming the use of HRWR at 0.5 to 0.7% and a fine aggregate/cement ratio of 1.0 to 1.5.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.668-674
• /
• 2002

Structural integrity assessment is indispensable for preventing catastrophic failure of industrial structures/components/facilities. This diagnosis of operating components should be done periodically for safe maintenance and economical repair. However, conventional standard methods for mechanical properties have the problems of bulky specimen, destructive and complex procedure of specimen sampling. Especially, the mechanical properties at welded zone including weldment and heat affected zone could not be evaluated individually due to their size requirement problem. So, an advanced indentation technique has been developed as a potential method for non-destructive testing of in-field structures. This technique measures indentation load-depth curve during indentation and analyzes the mechanical properties related to deformation such as yield strength, tensile strength and work-hardening index. Also indentation technique can evaluate a residual stress based on the concept that indentation load-depth curves were shifted with the direction and the magnitude of residual stress applied to materials. In this study, we characterized the tensile properties and welding residual stress of various industrial facilities through the new techniques, and the results are introduced and discussed.

• Journal of Chest Surgery
• /
• 제26권3호
• /
• pp.191-195
• /
• 1993

Among 25 consecutive cases having undergone mitral valve surgery between March 1991 and June 1992 in Gill General Hospital, 11 patients[44%] who had undergone mitral valve reconstruction using prosthetic rings is evaluated and presented. Patients` mean age is 43 + 19 years[range:16-72], and they are consisted with 4 males and 7 females. Mitral valve insufficiency is due to degenerative disease in 6 cases[55%] and rheumatic disease in 5 patients[45%]. Carpentier`s functional classification I is 2 cases, II is 6 cases, and III is 2 cases. Surgical techniques include prosthetic ring annuloplasty[11 patients, 100%], chorda shortening[6, 55%], leaflet mobilization[4,36%], new chorda formation[2, 18%], chorda transposition[1, 9%] commissurotomy[3, 27%], and papillary muscle splitting[3, 27%]. Average number of mitral anatomic lesions per patient are 2.7 and we used average 2.8 procedures upon mitral valve apparatus per patient. There were no surgical mortality and no late valve related admission during the mean follow up period of 17 months. The mean functional class[NYHA] is 2.81 preoperatively and improved to 1.10 postoperatively. Doppler echocardiography showed much improvement from grade II MR [1 case], grade III MR [1 case] and 9 cases of grade IV MR to 6 cases of patients showed no MR, only trace MR in 4 cases, and grade I MR was found only in one patient with NYHA functional class II postoperatively. The postoperative mean mitral valve area is $2.10+0.28cm^2$. We conclude that mitral reconstruction is a predictable and stable operation.

• Journal of Chest Surgery
• /
• 제29권3호
• /
• pp.292-296
• /
• 1996

총폐정맥환류이상증은 모든 폐정 맥혈이 좌심방 대신 직간접적으로 우심방으로 환류되는 선천성 심기 형으로 떼 내에 수술을 시 행치 않을 경우 80%의 높은 사망율을 나타내는 질환이다. 1984년 5월부터 1995년 5월까지 7례의 총폐정맥환류이상증에 대한 교정수술을 시행하였다. 환자의 연령분포는 15일부터 11세 까지로 평균 연령은 27.1개 월이 었다. 남녀 비는 남자가 5례, 여자가 2례 였다. 형태는 심장상부형이 5례, 심장형이 2례였다. 5례는 통상적인 체외순환하에서 수술하였고2례의 경우 초저 체온 및 완전혈류차단하에서 수술하였다 술후 합병증은 호흡부전 1례, 부정맥 2례, 창상감염이 1례 있었다. 수술사망은 2례 였으며 생존자들은 외래 추적 조사상 특이 증상없이 잘 지내고 있다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제39권2호
• /
• pp.43-54
• /
• 2013

In an attempt to regain function and aesthetics in the craniofacial region, different biomaterials, including titanium, hydroxyapatite, biodegradable polymers and composites, have been widely used as a result of the loss of craniofacial bone. Although these materials presented favorable success rates, osseointegration and antibacterial properties are often hard to achieve. Although bone-implant interactions are highly dependent on the implant's surface characteristics, infections following traumatic craniofacial injuries are common. As such, poor osseointegration and infections are two of the many causes of implant failure. Further, as increasingly complex dental repairs are attempted, the likelihood of infection in these implants has also been on the rise. For these reasons, the treatment of craniofacial bone defects and dental repairs for long-term success remains a challenge. Various approaches to reduce the rate of infection and improve osseointegration have been investigated. Furthermore, recent and planned tissue engineering developments are aimed at improving the implants' physical and biological properties by improving their surfaces in order to develop craniofacial bone substitutes that will restore, maintain and improve tissue function. In this review, the commonly used biomaterials for craniofacial bone restoration and dental repair, as well as surface modification techniques, antibacterial surfaces and coatings are discussed.