• Journal of Navigation and Port Research
• /
• v.37 no.1
• /
• pp.113-121
• /
• 2013

IMO(International Maritime Organization) is existed the movement for revising ISM Code so that the maintenance history and the trouble information given trading in a ship can be transferred. An empirical analysis was made on the influence that will have upon shipping industry through surveying on the recognition on ISM Code revision in employees of the relevant field and on the expected problems given being amended ISM Code as the above. In conclusion, the positive effect is judged to be more in the aspect of ship safety, which is the aim of ISM Code, rather than the negative effect, which may take place given being revised ISM Code. In other words, the clean market can be formed through this because fairness is maintained on both sides given trading in a ship by which opening the maintenance record and the trouble history is applied equally to a buyer and a seller. Ships can be reduced a loss of time and cost in preventing similar problems and seeking solution that may appear in important equipments, through this maintenance record. Also, based on these materials, it comes to be available for analyzing a risk of ship and preventing and managing a risk, thereby being increased ability of maintenance and repair in a ship, resulting in being judged to likely contributing to ship safety and environmental-pollution prevention.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.233-238
• /
• 2014

Purpose : The Varian's Eclipse radiation treatment planning system is able to correct radiation treatment thought leaf gap which is limitation MLC movement for collision with both MLC. In this study, I'm try to analyze dosimetric effect about the leaf gap in treatment planning system. And then apply to clinical implement. Materials and Methods : The Elclipse version is 10.0. In general, the leaf gap set to 0.05~0.3 mm and must measurement each leaf gap. The leaf gap measured by each LINACs and photons. We applied to measured each leaf gap in IMRT and VMAT. Changing the leaf gap, we evaluated treatment plans by Dmax, CI, etc. Results : When the same plan was evaluated with changing the leaf gap, an increase of 2-5% over the value Dmax, CI increases mm to 0.0~0.50 mm leaf gap. Volumetric modulated and intensity modulated radiation therapy plans all showed the same trend was not found significant between each radiation treatment planning. Conclusion : Generally, the leaf gap setting has a unique measure of the Multileaf collimator. However, the aging of the Multileaf collimator, calibration, and can be changed, after inspection and repair of the lip gap should eventually because these values affect the treatment plan must be applied to the treatment after confirmation. In some cases, may be to maintain the initial setting value of the lip gap, which is undesirable because it can override the influence on the treatment plan.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.284-291
• /
• 2013

Purpose: This study compared fracture strength and fracture modes between metal wire reinforcement and glass fiber reinforcement in repaired maxillary complete denture. Materials and methods: In this study, fracture was reproduced on center of maxillary complete dentures and the denture was repaired with auto-polymerizing resin. The experimental groups (n = 10) were subjected to the following condition: without reinforcing material (control group), reinforcing with metal wire (W group), reinforcing with glass fiber pre-impregnated with light-curing resin (SES MESH, INNO Dental Co., Yeoncheon, Korea, G group). The fracture strength and fracture modes of a maxillary complete denture were tested using Instron test machine (Instron Co., Canton, MA, USA) at a 5.0 mm/min crosshead speed. The flexure load was applied to center of denture with a 20 mm diameter ball attachment. When fracture occurred, the fracture mode was classified based on fracture lines. The Kruskal-wallis test and the Mann-whitney U test were performed to identify statistical differences at ${\alpha}=.05$. Results: W group showed the highest value of fracture strength, there was no significant difference (P>.05) between control group and G group. Control group and W group showed anteroposterior fracture mainly, group W showed adhesive fracture of denture base and reinforcing material. Conclusion: In limitation of this study, the glass fiber did not improve the fracture strength of repaired maxillary complete denture, and adhesive failure was occurred along the lines of glass fiber.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.19
• /
• pp.8383-8390
• /
• 2014

Background: Although the predictive value of the excision repair cross-complementing group 1 (ERCC1) C118T polymorphism in clinical outcomes of patients with colorectal cancer (CRC) receiving oxaliplatin-based chemotherapy has been evaluated in numerous published studies, the conclusions are conflicting. Therefore, we performed the present meta-analysis to determine the precise role of the ERCC1 C118T polymorphism in this clinical situation and help optimize individual chemotherapy. Materials and Methods: A multiple search strategy was used to identify eligible studies. Pooled odds ratios (ORs) and their 95% confidence intervals (CIs) were used to estimate objective response and oxaliplatin-induced toxicity, with hazard ratios (HRs) with 95%CIs for progression-free survival (PFS) and overall survival (OS). Results: A total of 22 studies including 2,846 CRC patients were eligible in the analysis. Overall, no significant correlation was found between the ERCC1 C118T polymorphism and objective response to oxaliplatin-based chemotherapy, in all patients or in the Asian and Caucasian subgroups. However, the pooled analysis showed that the PFS and OS were significantly shorter in patients who carried T/T or T/C genotypes of ERCC1 C118T as compared to the C/C genotype. On stratified analysis by ethnicity, the ERCC1 118T allele was associated with a favorable prognosis in Caucasians (PFS, HR=0.58, 95%CI: 0.24-1.44; OS, HR=0.38, 95%CI: 0.22-0.64) but an unfavorable prognosis in Asians (PFS, HR=2.49, 95%CI: 1.87-3.33; OS, HR=2.63, 95%CI: 1.87-3.69) based on a dominant model. In addition, we failed to find a statistically significant impact of ERCC1 C118T polymorphism on oxaliplatin-induced toxicity. Conclusions: The ERCC1 C118T polymorphism may have prognostic value in patients with CRC undergoing oxaliplatin-based chemotherapy.

• Journal of the Korean Arthroscopy Society
• /
• v.5 no.2
• /
• pp.92-98
• /
• 2001

Purpose : To analyze the clinical results of isolated lateral meniscus injury according to discoid versus non-discoid, athletes versus non-athletes and repaired cases versus cases treated with meniscectomy. Materials and Methods : Between January 1997 and June 2000, arthroscopic lateral meniscus surgery was performed in 329 cases. We reviewed 80 cases of isolated lateral meniscus injury without associated ligament injury or other pathologic condition retrospectively. The study population was composed of 54 males and 26 females with average age of 30.2 years(range, $17\~40$ years). Average follow up period was 15 months(range, $12\~39$ months). Eighty cases were classified into three categories; discoid group versus non-discoid group, athletes versus non-athletes, repaired cases versus cases treated with meniscectomy. Clinical evaluation was performed using Lysholm knee score and Tegner activity. Results : Non-discoid group had higher incidence of longitudinal tear than discoid group. Athletes group had higher incidence of repaired cases than non-athletes group. The repaired group had better clinical result than patient treated with meniscectomy group. Conclusion : Although lateral meniscus has some special features including anatomic mobility which can cause instability after meniscectomy and technical difficulties in repairing, it is recommended repairing meniscus tear not only longitudinal but also horizontal and complex tear to obtain better clinical results.

• Conservation Science in Museum
• /
• v.15
• /
• pp.4-25
• /
• 2014

Chuncheon National Museum currently own a bronze Buddhist gong that was discovered in 1987 at the Sudasa Temple site of in Suhangri, Pyeongchang. Significantly, showing many casting defects and areas where was repaired, the Gong offered crucial information about the casting technique. To better understand the production technique, scientific analysis was conducted on various aspects of the gong, including its materials, moulds, chaplets, and defects. Composition analysis revealed that the gong was composed primarily of copper ^71.6wt%, tin ^18.2wt%, and lead ^7.2wt%, along with about 1wt% of both arsenic and antimony. The lead content of the chaplets was higher than that of the gong, and the lead content was the highest in the solder, which was used to fill holes after casting. Surface analysis, based on the parting line, indicated that the gong was most likely produced with the sand casting process. Radiography and close examination of the surface disclosed various casting defects ^{e.g., Cold Shut, Surface Folds, Misrun, and Blowholes Adjacent to Chaplets} and their possible causes. The casting defects of a few holes were filled with soft solder.

• Journal of the Korea Concrete Institute
• /
• v.18 no.2 s.92
• /
• pp.227-232
• /
• 2006

This article presents the results of experimental study that investigates the effect of filler and shrinkage reducing agent influencing on the strength properties of MMA-modified polymer paste that was produced to develop the surface-repair and coating materials of the concrete structures. Results show that the flexural and compressive strengths of the polymer paste increased 29 and 27%, respectively, when the aluminum hydroxide completely replaced the calcium carbonate as the filler Furthermore, when the shrinkage reducing agent was used 30%, both strengths decreased about 29% comparing to when the agent was not used. As in the cases of flexural and compressive strengths, the adhesive strength increased as the content of aluminum hydroxide as the filler increased, and it decreased as the content of shrinkage reducing agent increased. The adhesive strength with a dry concrete substrate turned out to be $30{\sim}40%$ higher than that with a wet concrete substrate.

• Korean Journal of Head & Neck Oncology
• /
• v.22 no.1
• /
• pp.8-14
• /
• 2006

Objectives: The p53 tumor suppressor gene has a key role in cellular control mechanisms involving apoptosis and DNA repair, leading to the G1 arrest following DNA damage. Its mutation is one of the most frequent alterations in human cancers. Ki-67 is identified in replicating cells of both benign and malignant lesions, so it can be the predictor of proliferative activity. The aim of this study is to evaluate the expression of p53 and Ki-67 in salivary gland tumors. Materials and Methods: Immunohistochemical analysis was used to detect expression of p53 and Ki-67 in paraffin-embedded samples from 31 benign and 27 malignant salivary gland tumors. Results were analyzed between benign and malignant tumors and compared with the clinical parameters such as stage and recurrence in malignant tumors. Results: p53 overexpression was detected in 19.6% of benign tumors and 40.7% of malignant tumors, but there was no statistical significance. p53 was significantly expressed in Warthin's tumor(45.5%) compared with pleomorphic adenoma(5.9%). Only 5.9% of pleomorphic adenoma were positive for p53, while 60% of carcinoma ex pleomorphic adenoma were positive for p53. Ki-67 was expressed in 3.2% of benign tumors and 51.9% of malignant tumors, which showed significant higher expression in malignant tumors. In malignant tumors, p53 and Ki-67 expressions bore no correlation to stage and recurrence. Conclusion: p53 overexpression is not associated with the progression of malignant tumors, and Ki-67 overexpression can be used as biologic indicator of malignant salivary gland tumors.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.6
• /
• pp.233-241
• /
• 1995

In this thesis, the fatigue tests were performed on a series of R /C beams repaired with co& crete-lmlyrner composites to investigate the fatigue bahavior. The three point loading system is used in the fatigue tests. In these tests, relations between the repeated loading cycles and mid-span deflections, number of repeated loading cycles when repaired beams were fractured, the bonding performance of repair materials were observed. On this basis, the mid-span deflections, the crack growth and failure mode of repaired R /C beams were studied. A S-N curve was drawn to present the fatigue strength of repaired beams. From the test results, it was shown that behavior of R /C beams repaired with polymer-cement series were very sirnillar to control beam about bonding performance, mid-span deflections and fatigue strength according to S-N curve drawn by the regression anlysis on the fatigue test results.

• Journal of Korean Foot and Ankle Society
• /
• v.9 no.2
• /
• pp.173-178
• /
• 2005

Propose: There have been many debates about the ideal surgical technique for acute Achilles tendon rupture. The purpose of this study is to review and analyze the clinical outcome of the acute Achilles tendon ruptures that had been repaired by indirect suture technique with minimal incision that utilized an instrument called Achillon (Newdeal, France). Materials and Methods: This study is based on the 14 cases (14 patients) of acute Achilles tendon total ruptures that have been repaired by minimal incision technique utilizing Achillon instrument from June 2003 to December 2004. Two cases were reruptured before 8 weeks and repaired again using Krackow suture which left 12 feet for postoperative functional evaluation with at least 6 months of follow-up. Ten cases were men and average age at time of injury was 34.4 (26-49) years. The time from injury to surgery was an average of 4.5 (1-9) days and the postoperative evaluations were done by an Arner-Lindholm scale and AOFAS score. The ability to return to original work and sports activities as well as patient satisfaction were also evaluated. Results: The follow-up period was averaged for 13.2 (6-24) months. Seventy-one percent of cases were ruptured during sports activities. The ruptured level was the average of 5.1 cm (3.2-8 cm) above calcaneal attachment and the skin incision was averaged for 2.7 cm (2.5-3.0 cm) long. At final follow-up, standing on tip-toe was possible in all cases while the heel-floor height on ruptured side was shorter by 0.7 cm (0-2 cm). By Arner-Lindholm evaluation scale, 9 cases were excellent, and 3 cases were good. Overall AOFAS score was an average of 96.1 (94-100), and all patients were satisfied with the result. Patients returned to work at an average of 1.3 months after the surgery and pre-injury sports activities were all possible from at 6 months after operation. Conclusion: Since we have treated acute Achilles tendon ruptures with minimal incision technique utilizing the Achillon and gained encouraging functional results with all patients returning to previous work with high patient satisfaction, this technique could be recommended as one of the ideal surgical options for the Achilles tendon ruptures.