• Journal of Environmental Health Sciences
• /
• v.34 no.4
• /
• pp.279-284
• /
• 2008

This paper aims to provide basic data for work environment control, prevention of worker exposure to asbestos and improvement of air quality to protect workers ‘health after measuring the level of airborne asbestos and workers' exposure in a shipbuilding repair businesses. For this study, a total of 27 samples were collected from 27 workers who had been exposed to asbestos during engine, piping, boiler and other manufacturing processes in 'A' Shipbuilding Repair Company in Gyeongnam. This research was conducted from Oct. 1 to 30, 2007 and had the following results: The target group (27 workers) consisted of all men with an average age of 35.9 years and 6.6 years of work on average. Among them, fifteen 15 (55.6%) were smokers. In terms of their duties at work, there were 12 plumbing repair engineers (44.4%), 8 boiler repair engineers (29.6%) and 7 engine engineers (25.9%). The geometric mean concentration of airborne asbestos was 0.004 f/cc. A total of 4 samples exceeded the exposure limit. In particular, three exceeded the legal limit by more than double, which means that some workers have been highly exposed to asbestos. In terms of the concentration of asbestos fibres by work process, plumbing repair was the highest (0.0071 f/cc($0.001{\sim}0.57\;f/cc$)) while boiler was the lowest (0.0015 f/cc($0.001{\sim}0.007\;f/cc$)). Based on this study, proper action needs to be taken as soon as possible to protect workers from the threat of asbestos.

• Journal of Agricultural Extension & Community Development
• /
• v.30 no.2
• /
• pp.119-129
• /
• 2023

This study aims to identify the types of safety accidents that occur during maintenance and repair operations and analyze the root causes. We used the logic tree diagramming to extract the root causes of 65 safety incidents specifically related to maintenance and repair work out of a total of 1,024 agricultural safety incidents that occurred between 2007 and 2020 collected by investigation with interviews. The extracted root causes were analyzed by categorizing them into six different safety system classifications. The results of the analysis and suggestions are as follows. Incidents related to maintenance and repair work, which can lead to irreversible safety hazards, have occurred frequently. These incidents were found to be occurring due to the overlapping of various safety system errors such as personal protective system and safety operation procedure. In the short term, it is necessary to emphasize compliance with the use of personal protective equipment, and enhancement of maintenance training. In the long term, it is necessary to establish a legal distinction for maintenance and repair work and clarify the responsible parties. Introducing a maintenance system is also crucial to prevent occupational injuries during maintenance and repair in agriculture.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.4
• /
• pp.531-539
• /
• 2021

Objectives: The purpose of this study is to understand the effect of infection anxiety about COVID-19 perceived by home appliance installers and repair technicians on work stress. Methods: To collect data, the purpose of the study was explained through the labor union of domestic home appliance service companies, and a survey was conducted through mobile to 286 home appliance installers and repair technicians who agreed to the survey. Results: As a result of the analysis, it was found that age, fatigue, work satisfaction, visit time, and Corona 19 infection anxiety had a significant effect on work stress. In other words, the higher the age, the higher the fatigue, the lower the job satisfaction, the higher the work stress was when the visit time was more than 30 minutes, and the higher the Corona 19 infection anxiety, the higher the work stress. Conclusions: Based on the results of this study, the following suggestions are made. First, in order to prevent work stress, we propose the development of a workplace health care program that can solve fatigue. Second, it is necessary to prepare a working environment and provide institutional support to reduce work stress by increasing Job satisfaction. Third, a workplace quarantine measures is needed to prevent infection for essential-workers who do face-to-face work in preparation for possible infectious diseases in the future.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.899-908
• /
• 2021

It is expected that the global market for vessel repair and remodeling will grow up to the scale of about 25 billion dollars by 2023. Korea's shipbuilding industry is leading the world with its international competitiveness in design and production technology. The actual status of vessel repair industry, however, is poor as there are only two or three companies for vessel repair that can deal with large vessels in the area of Gyeongnam. The reason is that civil complaints are filed severely about environmental problems and environment-related regulations are so strict that it is fairly hard to get governmental approval for the operation of a vessel repair workplace. Domestic vessel repair companies mainly target small- and medium-sized vessels. There are only few workplaces that can carry out regular examination or repair work on large vessels such as LNG vessels, and due to the high price of vessel repair, most of the domestic repair work on large vessels including LNG vessels tends to be snatched by markets in Southeast Asia or China. Despite the tremendous domestic demand of Korea that has established the world's first shipbuilding industry and world's sixth biggest harbor infrastructure, its vessel repair industry can be said to be in very poor condition. In order to vitalize vessel repair industry, this study is aimed to analyze the environmental influence of vessel repair workplaces in Gyeongnam where vessel repair companies are concentrated and suggest standard processes by analyzing vessel repair processes precisely.

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.442-448
• /
• 2022

Intermediate-level radioactive waste (ILW) is not subject to legal approval for cave disposal in Korea. To solve this problem, a spent resin treatment device that separates ¹⁴C-containing resin from zeolite/activated carbon and desorbs ¹⁴C through a microwave device has been developed. In this study, we evaluated the radiological safety of the operators performing repair work in the event of a failure in such a device treating 1 ton of spent resin mixture per day. Based on the safety evaluation results, it is possible to formulate a design plan that can ensure the safety of workers while developing a commercialized device. When each component of the resin treatment device can be repaired from the outside, the maximum and minimum allowable repair times are calculated as 263.2 h and 27.7 h for the ¹⁴C-detached resin storage tank and zeolite/activated carbon storage tank, respectively. For at least 6 h per quarter, the worker's annual dose limit remains within 50 mSv/year; further, over 5 years, it remained within 100 mSv. At least 6 h of repair time per quarter is considered, under conservative conditions, to verify the radiological safety of the worker during repair work within that time.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.48-49
• /
• 2019

The number of disputes over defects after completion of construction work in apartment buildings is increasing every year. In this situation, the prediction of reasonable defect repair costs is very important. In this paper, we are going to collect basic data for predicting defect repair costs through the correlation analysis of the construction period and defect repair cost of apartment houses. For this purpose, first of all, the construction period and defect repair cost of apartment houses were analyzed to analyze the construction period for each type of work, the construction period for each project type, and the construction period for each standard calculation. Next, the correlation between defect repair cost and the independent variables of the candidate was conducted. According to the analysis, the ratio of framing air, the ratio of finishing air, and the number of delay days showed strong correlation.

• Journal of Welding and Joining
• /
• v.29 no.2
• /
• pp.34-39
• /
• 2011

Nickel-based austenitic alloys such as Alloy 82 and 182 had been employed as the weld metals in nuclear power plants (NPPs) due to their high corrosion resistance as well as good mechanical properties. However, since the 2000s, the occurrence of primary water stress corrosion cracking has been reported in conjunction with these alloys in domestic and oversea NPPs. In the present work, we assumed an imaginary crack at the inner surface of a surge nozzle weld that had previously experienced the outside repair welding, and constructed its finite element model. Finite element analysis was performed with respect to the heat transfer, and then to the residual stress for obtaining the total applied stress distributions. These stress distributions were finally converted to the stress intensity factors for estimating crack growth rate. From the comparison of crack growth rate curves for the cases of no repair welding and outside repair welding, it was found that the outside repair welding did not exhibit negative effect on the crack growth for the surge nozzle under consideration in this work; in both cases, the cracks stopped growing before they became the through-wall cracks.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.3
• /
• pp.209-217
• /
• 2013

The execution of a construction project involves the engagement of many participants. Generally, the Authority uses CM to certify that the Work is built according to the contract documents. The CM work scope is expressed in the Construction Technology Management Act and its Regulation. The mandated and delegated CM services are limited to the construction period. If Contractor is required to repair a construction defect, the Contractor should bear the burden of the inspection service for the defect repair, because it is associated with him. Nevertheless, CM should submit a bond to provide the inspection and supervision service for the defect repair. These may result in conflict with each liability. Therefore, CM service in the law and regulation was investigated and analyzed in this study to classify the characteristics of CM contracts, and it was suggested that the CM liability for the inspection and supervision service for the defect repair should be reconsidered.

• English Language & Literature Teaching
• /
• v.11 no.4
• /
• pp.121-137
• /
• 2005

The present study aims to examine how the roles of teacher and learners affect the repair patterns of both teacher's and learner's utterances in English as a second language (ESL) classroom discourse. The study analyzed beginning ESL classroom discourse and found that the structure of repair seems to be greatly influenced by the roles of participants in a second language classroom. The teacher's repair work was mainly characterized by self-repair. In contrast, learners' repair sequences were predominantly characterized by other-repair. More specifically, self-initiation by the learner of the trouble source was cooperatively completed by the teacher and the other learners. Other-initiated and other-completed repair was the most prevalent form in the current classroom data, which was carried out by the teacher in both modulated and unmodulated manners. When the trouble sources were mostly concerned with the learners' problems with linguistic competence and information presented in the textbook, other-repair took place in a modulated manner (i.e., recasting and prompting). On the other hand, when dealing with learners' errors with factual knowledge, other-repair was conducted in an unmodulated way (i.e., 'no' plus correction).

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.135-141
• /
• 2012

This study was conducted to evaluate the characteristics of exposure to asbestos for ship repair workers in Korea by a systematic review. The number of articles studying asbestos exposure levels from ship repair workplaces was found to be 4. All asbestos concentration reported as either geometric mean and geometric standard deviation or ranges were transformed to arithmetic mean to estimate exposure level. In addition, weighted arithmetic means(WAMs) were calculated by weighing of the different number of samples. The WAM concentrations were 2.746 f/cc during asbestos dismantling work, 0.034 f/cc before asbestos dismantling work and 0.065 f/cc after working respectively. The maximum airborne concentration of asbestos during asbestos removal work was 7.02 f/cc which was 70 times higher than the occupational exposure limit of Korea, 0.1 f/cc. This study recommends that retrospective exposure to asbestos based on various ship types and operations should be assessed.