• 한국구조물진단유지관리공학회 논문집
• /
• 제22권2호
• /
• pp.68-75
• /
• 2018

본 연구에서는 기존의 균열보수 주입공법의 문제점을 해결하기 위하여 일반포트와는 다르게 중앙부에 높은 압력을 견딜 수 있도록 저장관의 재질은 고탄성 라텍스를 사용하였으며, 균열부위에 보수용액을 주입시 콘크리트 균열 내부에 존재하고 있는 공기가 배출될 수 있도록 TPS 공법을 개발 하였다. 또한 보수용액의 역류를 차단하는 밸브를 주입구에 설치한 새로운 주입식 포트를 개발하고 이에 대한 물리적 특성을 분석하였다. 분석 결과, 기존 주사기 공법에 비해 보수용액 주입속도가 향상되고, 시험조건에서 균열부위가 완전히 충전되는 것을 알 수 있었다. 보수 후의 품질은 압축강도 및 인장강도의 경우 주사기 공법 적용시에는 보수 후 약 20% 정도 저하하는 것으로 나타났고, TPS 공법 은 보수 후 강도가 오히려 약 2~7% 증가하는 경향으로 나타났다. 본 연구 결과를 통하여 탄성저장관을 사용한 주입식 포트 공법은 기존의 주사기 공법과 비교하여 주입성능 및 보수 후 품질이 증가하는 것을 알 수 있었고, 이를 활용하여 실구조물 적용 및 상용화를 위한 기반 자료로서 활용하고자 한다.

• 대한두개안면성형외과학회지
• /
• 제18권4호
• /
• pp.277-281
• /
• 2017

Traumatic cleft earlobes are a common problem encountered by plastic and reconstructive surgeons. Various techniques have been reported for the repair of traumatic cleft earlobes. Usually, the techniques of split earlobe repair are divided into two categories, namely straight- and broken-line repairs. Straight-line repair is simple and easy, but scar contracture frequently results in notching of the inferior border of the lobule. It can be avoided by the broken-line repair such as Z-plasty, L-plasty, or a V-shaped flap. Between April 2016 and February 2017, six patients who presented with traumatic cleft earlobe underwent surgical correction using a combination of the inverted V-shaped excision technique and vertical mattress suture method. All the patients were female and had a unilateral complete cleft earlobe. No postoperative notching of the inferior border the lobule occurred during 6-16 months of follow-up. Without the use of a broken-line repair, both the patients and the operators attained aesthetically satisfactory results. Therefore, the combination of the inverted V-shaped excision technique and vertical mattress suture method is considered useful in the treatment of traumatic cleft earlobes.

• 한국의류산업학회지
• /
• 제25권3호
• /
• pp.324-332
• /
• 2023

Consumers are addressing the issue of dimensional dissatisfaction by repairing clothes, experimenting with style changes, and looking for cost-effective solutions that result in better-fitting garments. This study investigated the repair status by type of clothing, analyzed the method and frequency of repair by type of clothing category and season, and analyzed consumer redesign activities. The findings revealed that upper garments, such as T-shirts, jumpers, jackets, dress shirts, and dresses, were frequently repaired. The common modifications to upper garments included(in order of frequency) shortening sleeve length, shortening overall length, reducing garment width, zipper repair, and adjusting sleeve width. Lower garments, such as pants, jeans, skirts, and training pants, followed in terms of repair frequency. The modifications to lower garments included(in order of frequency) shortening length, reducing width, adjusting waist width (both narrowing and widening), replacing elastic bands, zipper repair, and lengthening. Repairs were more frequently conducted in the order of autumn, winter, spring, and summer. Repair methods varied depending on the clothing type and alterations involved to the length and width of garments and the replacement or removal of old sections. Redesigning clothing as a recycling method was found to enhance the cost-effectiveness of the collection. The study further confirmed the sustainability aspect of redesigning and reusing clothing.

• Composites Research
• /
• 제37권2호
• /
• pp.76-85
• /
• 2024

본 논문에서는 보수를 위해 생성된 혼합물을 손상부위에 자동으로 분사하여 보수하는 탄소섬유 분사형 복합재 유지보수 로봇을 개발하였다. 로봇 개발을 위해 불연속 탄소섬유와 에폭시 수지(Epoxy resin) 및 경화제가 혼합된 보수용 혼합물을 손상부위에 분사한 뒤 경화시키는 보수공정을 개발하였다. 이후, 개발된 보수공정의 자동화를 위해 협동로봇(Collaborative robot)을 기반으로 보수용 혼합물을 손상부위에 자동으로 흡입 및 분사하는 말단장치(End of arm tool, EOAT)를 개발하였다. 개발된 로봇의 보수성능평가를 위해 복합재 인장시험 규정 ASTM D3039에 의거하여 0° 및 90°일방향 시편 제작 및 시험을 수행하였다. 시험은 손상되지 않은 시편, 손상된 시편, 그리고 손상 후 로봇에 의해 자동으로 보수된 시편에 대해 수행되었다. 시험 결과, 0와 90° 시편에 대해 각각 보수 후 약 10%와 90%의 인장강도 회복율이 확인되어 개발된 탄소섬유 분사형 복합재 보수 로봇의 보수성능을 검증하였다.

• International Journal of Ocean System Engineering
• /
• 제1권1호
• /
• pp.9-15
• /
• 2011

This study examined the relationship between the scarf angle and stress distribution, and estimated the strength recovery via a finite element analysis. The following conclusions were drawn from this study. Resin will fracture due to a tensile load with a high scarf angle, which is similar to the patch repair method. An applied stress can be loaded to a repaired laminate if the scarf angle is $5^{\circ}$. The Von-Mises stress increases with decreasing scarf angle, with the exception of a scarf angle of $30^{\circ}$, where the scarf angle can indicate the rates of shear and normal stresses. Strength recovery can be better if the scarf angle is decreased to a lower angle. However, scarf machining requires more time, a high skill level and considerable expense. Therefore, a scarf angle of $5^{\circ}$ is the most effective for a repair. These results may provide a guide for engineers wishing to formulate a standard for repair. The scarf angle needs to be carefully managed for a more efficient composite repair.

• 품질경영학회지
• /
• 제31권1호
• /
• pp.142-147
• /
• 2003

Burn-in is a widely used method to eliminate the initial failures. Preventive maintenance policy such as block replacement with minimal repair at failure is often used in field operation. In this, paper burn-in and maintenance policy are taken into consideration at the same time. The cost of a minimal repair is assumed to be a non-decreasing function of its age. The problems of determining optimal burn-in times and optimal maintenance policy are considered.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.225-230
• /
• 1995

Concrete structures need repair and rehabilitation due to functional deficiencies such as cracks, scaling and spalling. Loss of section such as spalling is caused by corrosion of reinforcing bar, fire, temperature change, poor design and etc. This study aims to examine the characteristics of polymer(epoxy)and polymer-cement(latex) for repair materials and to provide the proper repair scheme through static and fatigue tests. Totally 12 beams were tested. Results from static and fatigue tests of beams repaired with polymer and polymer-cement were compared.

• 항공우주시스템공학회지
• /
• 제7권1호
• /
• pp.39-43
• /
• 2013

In this study, damage assesment and repair technique of aircraft adopted on Sandwich composite structure were performed. The sandwich composite structure were damaged by drop weight type impact test machine. The damaged sandwich composite structure was repaired using external patch repair method after removing damaged area. This study presents comparison results of the experimental investigation between the impact damaged and the repaired specimen.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.167-171
• /
• 2006

In this study, for the establishment of the performance evaluation methods of repair material and method for reinforced concrete structure and the quality control standards of durability recovery method, the quantitative exposure data by exposure experiment under the coastal and normal atmosphere environment is accumulated and analyzed. Investigating and evaluating the result of exposure experiment during 30 months of exposure age under the coastal and normal atmosphere environment, carbonation depth and chlorideion penetration depth very little penetrated than cover depth. It seems reasonable to conclude that main cause of corrosion of reinforcing bar are inner chloride-ion and macro cell from the result of corrosion area and corrosion velocity. Accordingly, it is considered that fundamental data on the performance evaluation and quality control standards of repair material and method could be presented through continuous exposure test in the future.

• Journal of Welding and Joining
• /
• 제29권2호
• /
• pp.64-71
• /
• 2011

In this paper, crack propagation analyses in the inner diameter (ID) repair weld of the dissimilar metal weldment of a nozzle were performed using a finite element alternating method (FEAM). To calculate the theoretical solution for the crack tip stress intensity factor, a weak type singular integral equation consisted of crack surface traction and dislocation density function was constructed and solved in conjunction with the FEAM. A two-dimensional axisymmetric finite element nozzle model was prepared and ID repair welding was simulated. An initial crack, 10% depth of weld thickness, was assumed and crack propagation trajectory from the initial crack to the 75% depth of thickness was calculated using the FEAM. Crack growth versus time curve was also calculated and compared with the curves obtained from ASME code method. With the method constructed in this paper, crack propagation trajectory and crack growth time were calculated automatically and effectively.