• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.515-518
• /
• 2005

A concrete is easy to happen crack. So it requires crack-repair work to solve quality deteriorations of a building because of cracks. When crack is filled with crack-repair materials, it is difficult to find out how depth it was injected. So in this study we evaluated the injection depth with using indirect and oblique methods, ultrasonic pulse measurement method of NDT. The results of this study showed that both methods are possible to evalute penetration depth of crack-repair materials and indirect methods is thought to be more useful one than obliqure one.

• Structural Monitoring and Maintenance
• /
• 제2권2호
• /
• pp.133-143
• /
• 2015

Civil engineering infrastructure is aging and requires cost-effective maintenance strategies to enable infrastructure systems operate reliably and sustainably. This paper presents an approach for determining risk-cost balanced repair strategy of corrosion damaged reinforced concrete structures with consideration of uncertainty in structural resistance deterioration. On the basis of analytical models of cover concrete cracking evolution and bond strength degradation due to reinforcement corrosion, the effect of reinforcement corrosion on residual load carrying capacity of corroded reinforced concrete structures is investigated. A stochastic deterioration model based on gamma process is adopted to evaluate the probability of failure of structural bearing capacity over the lifetime. Optimal repair planning and maintenance strategies during the service life are determined by balancing the cost for maintenance and the risk of structural failure. The method proposed in this study is then demonstrated by numerical investigations for a concrete structure subjected to reinforcement corrosion. The obtained results show that the proposed method can provide a risk cost optimised repair schedule during the service life of corroded concrete structures.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.160-163
• /
• 2004

In domestic, various repair materials and method systems to keep up with these reinforced concrete deteriorated due to salt damage, carbonation, chemical decay et. developed and applied. However, on-site quality control of various repair materials and method systems isn't achieved desirably because it is depend completely on a men of experience' opinions above all else regardless of various on-site environments. In this background, mock up test with due regard to real on-site environments was performed to secure fundamental data for establishment of desirable on-site quality control. Mock up test using repair mortar analyzed from angles of construction methods, mechanical spraying pressures, W/M. Construction methods were designed manpower method and spraying method, spraying pressures were designed 32, 42, 52 psi, W/M were designed 14.4, 15.4, $16.4\%$. And compressive strength, Chloride ion diffusion coefficient, bond strength, SEM. of mock up test specimens were evaluated. In conclusion, we confirmed excellency of mechanical spraying pressures, fined extremely excellency of condition of spraying pressure 42 ps, W/M $14.4\%$ within this study. therefore the results of this study will be useful to provide fundamental data for establishment of desirable on-site quality control.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.9-15
• /
• 2017

In hot forming process, the dies in which excessive worn or crack occurs is reused after repair. Generally hot forming dies are recycled through a welding repair method. Welding repair methods are highly dependent on the skills of engineer. It causes process defects such as dimensional defects and structural defects. Recently, the metal 3D printing method has been applied to the repair of used dies. The aim of this study is to evaluate the wear characteristics of AISI H13 tool steel repaired by 3D printing method. Three kinds of wear specimens were fabricated by using 3D printing, welding, and initial material. A pin-on-disk wear test was carried out to evaluate the wear characteristics. From the result of wear test, the wear characteristics of 3D printing method was superior to that of the welded material, and was similar to that of the initial material.

• 한국도로학회논문집
• /
• 제16권4호
• /
• pp.21-33
• /
• 2014

PURPOSES: The purpose of this study was to break away from the workforce method using cold-mix asphalt mixtures and has a constant quality and has develop repair materials of pre-production asphalt-precast types. METHODS: The selection of the repair material was determined as the results obtained through physical properties of materials and the field applicability. In case of repair materials, values obtained through Marshall stability test & the dynamic stability test & retained stability test as well as the site conditions was considered. In case of adhesive, test results were obtained through examination of the bond strength(tensile, shear) and the field applicability of the adhesive was examined through combined specimens to simulate field applications. RESULTS : According to the results of laboratory tests, in the case of repair materials, Marshall stability and dynamic stability, retained stability of cold-mix reaction type asphalt mixture is the highest. In the case of adhesive, two-component epoxy-urea has a very high bonding strength(tensile, shear) was most excellent. According to the results of field tests, when epoxy-urea was excellent workability. Also, the repair body through actual mock-up test did not occur large deformation and fracture after 12 months. CONCLUSIONS : A suitable repair material is cold-mix reaction type mixture of asphalt-precast, a suitable adhesive is a two-component epoxy-urea.

• 한국가스학회지
• /
• 제18권2호
• /
• pp.62-68
• /
• 2014

도시가스 배관의 현행 보수 방법으로는 육성 용접, 슬리브 용접과 같은 용접을 이용한 방법 이외에 탄소 섬유나 유리 섬유 복합 재료를 사용한 보수 방법이 해외에서 사용되고 있다. 우리 나라의 경우도 도시가스 배관 안전관리의 중요성이 대두되면서 자체보수규정을 마련할 필요성이 있다. 해외의 사례로서 이미 연구가 상당부분 이루어진 용접에 의한 보수 방법이 아닌 비교적 새로운 보수 방법인 복합재로 보수 방법에 대한 연구가 필요한 시점이다. 본 논문에서는 복합재료 보수배관의 안정성 평가의 기본 단계로서 탄소 섬유 복합재료를 사용하여 보수한 가스 배관의 유한 요소법을 이용한 구조 해석을 수행하였고 결과에 대해 고찰해 보았다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.571-578
• /
• 1997

In the repair and repair works, epoxy resins are widely used as repair materials. The successful concrete repairs and retrofit works depends on the quality of the repair and retrofit materials. Although many materials for the repairs and retrofit have been developed in many contries, information on the repair methods are somewhat limited. Futhermore, the repairs and retrofit methods are also largely dependent on those froms in other developed contries, it is necessary to initiate rather fundamental repair-related research. The purpose of this study is to investigate th physical and mechanical properties of epoxy resin which is commonly used in repairing concrte crack in RC structures. The basic physical properties such as specific gravity, gel point and shrinkage ratio as well as the mechanical properties such ad the tensile and compressive strength, elastic modulus were acquired by the standard test method (KS code). For the test results, the great deviations of physical and mechanical properties among the test materials were discovered and is, therefore, recommended that careful attentions should be give in selecting the epoxy resin by considering the characteristics of the repair materials and repair works.

• Clinics in Shoulder and Elbow
• /
• 제13권1호
• /
• pp.14-19
• /
• 2010

목적: Type II SLAP 병변의 관절경적 수술에서 봉합사가 한 개만 연결된 봉합나사를 이용한 새로이 고안된 V자 봉합법과 기존의 봉합법과의 임상결과를 비교하고자 하였다. 대상 및 방법: 2006년 05월부터 2008년 10월 까지 무작위로 새로이 고안된 봉합법으로 수술을 받은 11명의 환자와 기존의 봉합법으로 수술을 받은 12명을 대상으로 하였고 평균 추시기간은 15개월 이었고 임상결과는 UCLA 점수와 VAS 통증 점수를 이용하였다. 결과: 두 환자군 간의 수술 전 후 UCLA점수와 VAS 통증 점수의 향상에는 큰 차이가 없었다. 결론: 저자들이 고안한 새로운 V자 형태의 봉합법은 봉합사가 한 개만 연결된 흡수성 봉합 나사로도 기존의 방법들과 유사한 임상 결과를 보여 줄 수 있는 유용한 대안으로 생각된다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권2호
• /
• pp.70-78
• /
• 2022

The trenchless entire repair technology (TERT) have many different names depending on the companies, and they have the same or similar methods as well as materials. In addition, there was quiet difficulty in application of field working and even confuse to classify for new TERT, while application criteria of TERT is not listed systematically. This study proposed standardization and method for TERT affecting by pipe condition, working materials, working method, specification/quantity per unit according to field condition, strange affairs and others. Determination criteria of defective sewer pipe has proposed to effective method which modify a criteria between Ministry of Environment and Seoul Metropolitan City. A Cured-in-place pipe (CIPP) is suitable for TERT, and the design criteria for the entire broken pipe are proposed when the pipe itself deforms more than 10%. A check lists are specimen preparing, hardening site made by clamped mold, numbers, flexural and tensile property, water leak and desquamation test, and have to use material property of minimum CIPP value depend on ISO 11296-4, ISO 11297-4, KS M3550-7 and KS M3550-9.

• 한국정보통신학회논문지
• /
• 제18권10호
• /
• pp.2489-2496
• /
• 2014

기존 수기 작성기반 선박 수리장비 관리 시스템은 빈번한 장비 분실 및 연체로 장비 관리에 많은 문제점들이 있다. 이러한 문제를 해결하고자 바코드 시스템을 도입하였다. 그러나 바코드 훼손에 따른 위조 장비의 대체 문제에 대처할 수 없다. 따라서 고가의 선박 수리장비의 관리를 위해 추가적인 확인 절차가 필요하다. 본 논문에서는 선박 수리장비 관리를 위한 이미지 비교기법을 제안한다. 구체적으로 모바일 디바이스의 특징을 이용한 정규화와 이미지 비교 판단 조건을 제안한다. 실시간 촬영 및 오버랩과 Crop 기능을 가진 모바일 디바이스를 이용하여 이미지를 정규화 하였고, 유사이미지에 대처할 수 있는 이미지 비교 판단 조건 세 가지(사각형의 내각의 합, 각 내각의 크기, 모서리의 좌표점)를 적용하였다. 그 결과 본 논문에서 제시한 방법이 방향, 조명, 크기 등의 변화에도 강건함을 보이며 테스트 결과 95% 이상의 정확도를 보였다.