DOI QR코드

DOI QR Code

Structural Analysis of Gas Pipeline Repaired by Carbon Fiber Composite Materials

탄소 섬유 복합재료로 보수된 가스 배관의 구조 해석

  • Park, Sungho (School of Mechanical and Aerospace Engineering, Seoul National University) ;
  • Kim, Hansang (Dept. of Mechanical Engineering, Gachon University)
  • 박성호 (서울대학교 기계항공공학부) ;
  • 김한상 (가천대학교 기계공학과)
  • Received : 2014.03.21
  • Accepted : 2014.04.28
  • Published : 2014.04.30

Abstract

Composite repair methods besides welding methods such as surfacing and sleeve welding have been used as repair of damaged gas pipelines in foreign countries. Importance of safety management of city gas pipelines have been emphasized recently and our own repair manuals and codes for repair of city gas pipelines are required. It is right time to conduct research on the composite repair methods since the composite repair was introduced rather recently compared to the welding repair methods which have been investigated for long time. In this study, as a starting point of safety assessment of gas pipeline repaird by composite materials, structural analysis of gas pipeline repaired by carbon fiber composite materials was conducted using finite element analysis(FEA) method and the results was discussed.

도시가스 배관의 현행 보수 방법으로는 육성 용접, 슬리브 용접과 같은 용접을 이용한 방법 이외에 탄소 섬유나 유리 섬유 복합 재료를 사용한 보수 방법이 해외에서 사용되고 있다. 우리 나라의 경우도 도시가스 배관 안전관리의 중요성이 대두되면서 자체보수규정을 마련할 필요성이 있다. 해외의 사례로서 이미 연구가 상당부분 이루어진 용접에 의한 보수 방법이 아닌 비교적 새로운 보수 방법인 복합재로 보수 방법에 대한 연구가 필요한 시점이다. 본 논문에서는 복합재료 보수배관의 안정성 평가의 기본 단계로서 탄소 섬유 복합재료를 사용하여 보수한 가스 배관의 유한 요소법을 이용한 구조 해석을 수행하였고 결과에 대해 고찰해 보았다.

Keywords

References

  1. Carl E. Jaske, Brian O. Hart, William A. Bruce, Updated Pipeline Repair Manual Rev. 6, Final Report (Project Number R 2269-01R), Pipeline Research Council Interntional, Inc., (2006)
  2. W.S. Kim, "Repair methods of gas pipeline", Gas safety, 206, Korea gas safety corporation, (2008)
  3. Korea gas corporation, "Design standards for buried depth of gas pipeline", KOGAS, (2003)
  4. Korea gas corporation, "GSM-2101 standard for pipeline materials", KOGAS, (1997)
  5. Korea road and transportation association, "Guide to road design", KRTA, (2003)
  6. J.W. Seo, J.S. Choi, S.I. Kim, "A study on prediction of layer properties of asphalt concrete pavement under various vehicle speeds", KSCE, 22(4), 649-658, (2001)
  7. Korea Society of Civil Engineers, "Explanations of guide to road bridge design", Kimoondang, (2008)
  8. I.W. Bang, H.S. Kim, W.S. Kim, Y.C. Yang, K.W. Oh, " Development of the computer program calculating the stress induced by various loads for buried natural gas pipeline (I)", KIGAS, 2(2), 18-25, (1998)
  9. J. Cho, B. Choi, W. Cho, J. Kim, S. Hong, S. Jeong, J. Kim, "Stress and Strain Distrubution of Gas Pipe According to Buried Depth", KIGAS, 17(5), 51-57, (2013)
  10. J.H. Won, M.K. Kim, H.K. Yoo, M.S. Kim, "Stress Distribution of Buried Gas Transportation Pipeline According to Vehicle Load Velocity", KIGAS, 12(1), 7-12, (2008)