• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.12
• /
• pp.109-121
• /
• 2010

Recently, smart grid for solving energy problems have been receiving growing attention. Also, renewable energy sources such as photovoltaic and fuel cell as future energy for realizing smart grid have been widely studied. On the other hand, hybrid structures have been proposed since the output power of these renewable energy sources is usually dependent on weather conditions. This paper proposes a hybrid system involving a proper photovoltaic in the hybrid system, Polymer Elecrolyte Membrane Fuel Cell with water electrolyzer and ultracapacitor. The results of simulation and output of the proposed model are established and analysed by Matlab/Simulink and SimPowerSystems.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.123-126
• /
• 2005

Recently, because of the depletion of fossil fuels and the environmental pollution by using fossil fuels and harmfulness of atomic power plants. the interests concerning new and renewable energy resources are rising increasingly. And of all new and renewable energy sources the PV generation systems are recognized as the most useful and desirable renewable energy source in allowance for installation conditions. In this development, the 3kWp photovoltaic power generation system is realized to verify the performance of the 3kWp PCS developed by Hyundai Heavy Industries Co. (HHI). The photovoltaic array used in this system is composed of 60 modules of 50Wp capacity. The developed system is tested as procedures and items of test regulation recognized by governmen and the experimental results show the excellent electrical characteristics. Now, the 3kWp PCS developed is installed in the PV model house built in HHI plant and is being tested for practical use commercialization.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.892-901
• /
• 2018

SiC MOSFETs have been used to improve system efficiency in high frequency converters due to their extremely high switching speed. However, this can result in undesirable parasitic oscillations in practical systems. In this paper, models of the key components are introduced first. Then, theoretical formulas are derived to calculate the switching oscillation frequencies after full turn-on and turn-off in clamped inductive circuits. Analysis indicates that the turn-on oscillation frequency depends on the power loop parasitic inductance and parasitic capacitances of the freewheeling diode and load inductor. On the other hand, the turn-off oscillation frequency is found to be determined by the output parasitic capacitance of the SiC MOSFET and power loop parasitic inductance. Moreover, the shifting regularity of the turn-off maximum peak voltage with a varying switching speed is investigated on the basis of time domain simulation. The distortion of the turn-on current is theoretically analyzed. Finally, experimental results verifying the above calculations and analyses are presented.

• The KIPS Transactions:PartD
• /
• v.10D no.3
• /
• pp.531-540
• /
• 2003

Because of the rapid increase of energy consumption, we have some problems such as environmental pollution, global warming, the oil shocks, and so on. To solve these problems, concern about renewable energy such as solar energy, wind force, and water energy is continuously increasing. America, Europe, and Japan have developed a system that manage and utilize the information of the renewable energy resources. However, in the domestic, renewable energy information system was not effectively built yet. Therefore, in this paper, we propose a renewable energy information system, which store and manage solar radiation energy data. We implemented the system using ArcView GIS. Also the system is able to retrieve the information from the energy database through various spatiotemporal queries. In addition, user can identify the results of summary data in the form of chart, graph, and counter line. The implemented system is supplied to the user through the web by ArcIMS.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.12
• /
• pp.1666-1672
• /
• 2015

Small islands are quite adequate places where microgrid system with renewable sources can replace diesel engines as operation costs of diesel engine in most small islands are very high. To get the large amount of renewable energy, the microgrid system has very large capacity of renewable sources. The system with large capacity of renewable sources can meet the case when supplied energy is greater than the load and the fluctuation of source output is very large. The battery energy storage system can be a solution to stabilize the system with large capacity of renewable sources. In this case, BESS can be utilized as a master source for the synchronous operation of all sources including diesel engine, wind turbine and PV. The diesel generators can be used as a backup in case the BESS SOC goes below a certain level. In this paper, we suggest a novel unit commitment of diesel generators and operation schedule of pump for water supply service with the information of wind forecast, PV forecast, and load forecast. The proposed methods has been implemented and tested at the test bed in Gasa-Island.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.55-59
• /
• 2022

This paper introduce Renewable Energy forecasting technology, which is a part of renewable management system. Then, calculation method of dedicated transmission line's meteorological data to forecast renewable energy is suggested. As the case of dedicated transmission line, there is only power output data combined the number of renewable plants' output that acquired from circuit breakers. So it is need to calculate meteorological data for dedicated transmission line that matched combined power output data. this paper suggests two calculation method. First method is select the plant has the largest capacity, and use it's meteorological data as line meteorological data. Second method is average with weight that given according to plants' capacity. In case study, suggested methods are applied to real data. Then use calculated data to Renewable forecasting and analyze the forecasting results.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.3
• /
• pp.79-87
• /
• 2006

This study aims to presents the applicability of apartment building for renewable energy systems using method of uncomplicated calculation and computer simulation. According to the weather conditions (NASA Surface meteorology and Solar Energy) analysis, it has been found that photovoltaic and wind power system can be applied to apartment buildings application. In case study considering layout and block plan, adaptation of solar water heating, photovoltaic and wind energy system to apartment buildings was proved to produce a profit. And the application strategies of renewable energy systems can be used not only for the investment decisions for economic analysis but also for the comparative analysis of uncomplicated calculation and computer simulation.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.5 no.2
• /
• pp.7-12
• /
• 2009

The fossil fuel has been used as the main resource of national development. Through this process, many environmental problems have happened. For example, we depend 97% energy on import for national spending and the exhaustion of the fossil fuel is at an important issue nowadays. So more people are interested in renewable energy which is more environmental and never be gone. However, the supply doesn't go on smoothly because of some problems such as capital condition, the limitation of geographical features and low technology, etc. In conclusion I'd like to check some policies and support systems about renewable energy first, and then to find problems for adapting other area through the comparison in this thesis.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.656-659
• /
• 2005

his paper develops the systematic and quantitative priority-determining method for national investment using the framework of evaluating R&D. This study proposes multi criteria for evaluating the R&D of New & Renewable Energy through analysing the attribute of 11 types of energy. The framework is constituted by 4 criteria, the political urgency, economic impact, regional constraint. and technological attribute and the each criteria has 3 or 4 sub-criteria. These sub-criteria are weighted using AHP.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.600-603
• /
• 2005

U.S. National Research Council proposed benefits framework for energy R&D project as economic benefits, environmental benefits, security benefits and knowledge benefits. Following this framework, U.S. National Renewable Energy Laboratory evaluated the projected benefits of Federal Energy Efficiency and Renewable Energy Programs in the indicators of energy-expenditure savings, energy system cost savings, $CO_2$ emissions reductions. oil savings, natural gas saving and avoided additions to central conventional power. As this result, geothermal energy have predominant position in the energy-expenditure savings, natural gas saving and avoided addi t ions to central conventional power to FY2050. The projected benefits, in monetary value, of the whole supply-potential of geothermal energy in Korea were evaluated as 480.2 billion Won, 43.1 billion Won and 135.8 billion Won for the private energy-cost savings, social environmental-cost savings, and import energy-cost saving, respectively.