• Journal of Agricultural Extension & Community Development
• /
• v.11 no.1
• /
• pp.191-207
• /
• 2004

This study was focused on the development of greenhouse management and environmental control system using internet. The essence of this system were remote automatic control unit connected with greenhouse environmental control according to the growth stages of crops, The specific objectives of the study were; 1) to analyze need of greenhouse environmental remote control system, 2) to investigate the important functions related to greenhouse management program, 3) to explore the possibility of diffusing the system using internet.The study was carried out through review of related literature and need assessment from the research and extension workers in charge of greenhouse management using questionnaire survey, interview and field study. The results of the study were summarized as fallows: 1) About 89% of respondents responded positively on the need to establish automatic control system using internet. 2) The greenhouse management and environmental control system using internet was possible to control the greenhouse in remote, automatic, and simultaneous manner, and additionally by cellular phone in emergent situation. 3) The system was possible to precisely control the greenhouse environment, and it was able to connect the environmental control data with information on growth of crops. 4) By networking the farmer, extension educator of agricultural technology center and researcher, web based farm consulting was possible through the system. Based on the results of the study recommendations were suggested as follows: 1) Thorough spot inspections and field trials should be performed before the diffusion of this system. 2) The costs of the system installation and maintenance should be moderate. 3) The operation of the system should be simple and easy for tamers to adopt. 4) National support should be made to build better internet infrastructure in rural areas.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.3
• /
• pp.229-234
• /
• 2007

Currently offshore fisheries are one of shrinking industries and fishermen are getting older. Moreover it is difficult to work fisheries for decreasing fishermen as the time goes. Two people per a boat work together at least for proper fisheries. If the unskilled fisherman boards on boat, it will make some troubles to speak each other and diminish the efficiency of working because one person should control the boat. So it need to study the remote control system for leasure and outboard engine that can control and work at the same time. The remote control system is consisted of engine, steering gear and forward reverse neutral gear controls. These three controls are made by position and speed control using DC motor, and microcontroller is used to control the engine speed and rudder angle. This system can be controled and worked alone and we tested the system at sea and confirmed that the system works properly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2100-2106
• /
• 2016

The automation system uses PLC to monitor the manufacturing process status of the production product and processes the sensor information transmitted from the sensor. In this paper, we propose a remote surveillance system to monitor the status of control relay used in automation system. The proposed system consists of a control relay module, a one-chip processor module, a computer monitoring system, and a database system that inputs and manages the details of the control relay. The computer monitoring system is configured to monitor the operating condition and life time of the control relay. The database is configured so that the input date of the control relay can be input and corrected, and the operating state information of the control relay can be automatically printed. In the remote monitoring system, the failure status of the control relay is recognized in real time, and the time required for normal operation can be minimized by quickly replacing faulty parts.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.1
• /
• pp.41-48
• /
• 2007

In this paper, a example of a development of web-based remote monitoring and control system using Java technology on TCP/IP is proposed. We implemented Client/Server socket programs using Java Socket class, and applied those to a greenhouse made from LEGO blocks and made web-based greenhouse remote monitoring and control system. Implemented System transferred states of greenhouse to client programs, and control signals from client program were transferred to Server. Greenhouse model was controlled well by the system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.5 s.236
• /
• pp.639-646
• /
• 2005

As the internet communication is prevalent in recent years, it becomes quite possible to monitor and control some mechanical plants from the remote place through the TCP/IP communication. Such a concept is expected to be applied to many industrial systems fur easy maintenance and trouble shooting as well as various kinds of expensive test equipments fo. sharing. Synthetic jet actuate.(SJA) is a kind of high-lifting device to prevent flow separation at high angle of attack and its use for flow control has received a great amount of attention. In this research, remote control and data monitoring system for SJA wind tunnel test is implemented by TCP/IP communication with DSP as a embedded web server. From the tests performed with embedded server, it showed the possibility of reliable remote control system design utilizing the internet communication.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.649-651
• /
• 1999

This paper presents SNMP remote management system for power plants using micro-controller. Control board supporting LAN-based remote monitor and control is produced and MMI program on PC is also constructed. To expand into Internet, SNMP(Simple Network Management Protocol), the standard network management protocol of TCP/IP protocol suite, is ported to this control board consisted of micro-controller, 80c196KC, and LAN controller, Am7990DC. To overcome the constraints of CPU performance and memory capacity, TCP/P protocol suite is simplified and informations needed to management were implemented in accordance with MIB(Management Information Base) specified in RFC. Also monitoring software is constructed by Visual Basic.

• KSCI Review
• /
• v.14 no.2
• /
• pp.117-122
• /
• 2006

In this paper, we designed and implemented the DCS(Distributed Control System) terminal remote monitoring board for build total unified management system based wireless communication on automatic control system fields. Also, it tested and evaluated for check an usability and performance. The board monitored relay and fuse status at power management room real-time. Therefore, we expected economic effects extend relay life-time that pre-detected errors and prevented relay fault.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1127-1131
• /
• 2005

One of problems in industries is an installation for an automation system device such sensor, transducer, controller, and so on those are located in different areas. Such problem makes a difficulty for maintenance and installation. The aim of this research attempts to design a high performance controller with remote devices. One attractive is to group near devices in near place together to centralizes control. This paper presents network device groups distributed through digital and analog Remote Terminal Unit (RTUs). Such devices are centralized by computer or PLC control and communicated with similar protocol through serial bus. Our scheme, there are many advantages such as, saving both time and cost,convenience compared to other ways.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2011

This paper describes the high speed PLC-based remote control system that can monitor and control textile machineries bi-directionally through Internet. There are many textile machineries without network functions in the factory. We apply the PLC technology in order to give a network function to them in which the existing electric power line is used with network communication lines without separate wiring constructions. In order to realize this system, we have implemented a protocol for network communication of system, high-speed PLC modules, and Ethernet-to-UART modules. Finally we confirmed the effectiveness of system by applying actual test environments.

• The KIPS Transactions:PartA
• /
• v.8A no.2
• /
• pp.91-98
• /
• 2001

TCP/IP based remote system using internet presented the method to access and control all the types of resources connected to network system over time and space. In this paper, We studied a resource control method through a mutual communication of a system association composed of service user, provider, and manager of the network system for the web based remote control system. The service users require the resources, and its providers are a variety of devices and digital electronic products which can provide the services in a network system. The service manager who operates the whole system performs the role to interconnect its users with its providers. Through an experiment, an implemented system confirmed flexibility, stability, and extensibility of the method presented in this paper.