• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.541-544
• /
• 2004

Recently, the heat island phenomenon in which the temperature of a city part rises from the circumference ground has developed into a big problem. In this study, we aimed at examining the impact of increasing vegetation in urban areas to reduce the heat island phenomenon by taking the Fukuoka City of Japan as a case. In order to discuss the relation between vegetation environment and the heat island phenomenon, we have calculated Normalized Difference Vegetation Index (NDVI) and mapped the spatial vegetation distribution. These are then compared with the heat island phenomenon investigations in Fukuoka City. The results of the study revealed that the areas showing comparatively lesser heat island phenomenon are those having increased vegetation.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.320-323
• /
• 2006

Temperature inversion may cause air pollution problems because air pollutants cannot be dissipated through vertical motion of the atmosphere and are accumulated near the surface. The air quality is worsen gradually if an inversion event lasts for a long time. An inversion event is defined as consecutive temperature profiles with occurrence of the temperature inversion condition. In this paper, temperature inversion events over three major cities on Taiwan are analyzed. They are measured by ground-based microwave radiometers installed in Taipei, Taichung, and Kaohsiung from 2002 to 2004 by the Environment Protection Administration (EPA) of Taiwan. Characteristics of temperature inversion events at the three cities are extracted using different classification methods.

• 대한안전경영과학회지
• /
• 제17권1호
• /
• pp.281-287
• /
• 2015

The objective of this study is to provide mobile application developers with a standard testing system and service method. By using this testing service, the developers can test the functional performance and quality of their applications from remote sites through Internet. This service standard helps to test applications quickly, easily, and cheaply through the intuitional scenario graphical environment, and becomes a base for constructing a testing system which can be shared by developers, users, and the third parties.

• 대한임베디드공학회논문지
• /
• 제7권3호
• /
• pp.135-142
• /
• 2012

The Quality of embedded system depends on the embedded software. As the complexity and the size of embedded software have been increasing, it is more likely that the software may include faults, and the reliability and stability issues are getting more important. In this paper, we propose a remote test tool for software based on VxWorks by using fault injection method. The test tool consists of test server and test client for testing on the cross development environment. The test server operates in the host system and user can not only test but also monitor the software by using it. The test client operates in the target system and it controls kernel objects and sends the input data into the software when receiving the control and data from the test server. We developed the prototype software and demonstrated the ability of testing software robustness by injecting faults.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.338-342
• /
• 2003

Hybrid machine is based on hardware technologies of machine tool and software technologies of open architecture controller. In machining technology, combination technology of turning, milling, and grinding and in machining energy technology. combination of mechanical, electrical, and chemical technology are developed. This paper describes hybrid machine technology for combination of machining, on-machine measurement, on-machine CAM, and on-machine remote monitoring and control in open architecture controller environment. For on-machine measurement, non-contact measurement technology based on CAD information is developed. For on-machine CAM, interactive CAM program for automatic NC program generation and tool path simulation is developed. For generation on-machine remote monitoring and control, suitable interface method between web program and CNC is proposed. The developed hybrid machine technology is implemented in 3 axes milling machine for evaluation of operablity.

• 산업기술연구
• /
• 제30권B호
• /
• pp.113-118
• /
• 2010

In this paper, We proposed remote dimming control system for Light Emitting Diode(LED) street light using Power Line Communication(PLC). LED will be used widly by indoor or outdoor lighting because of semi-permanent life and environment restriction. For energy saving of street light, the dimming control system is very necessary and the PLC is a very efficient technique. Thus, in this paper we proposed the remote dimming control system for LED street light using PLC. A performance of the proposed system was validated by experimental results.

• 센서학회지
• /
• 제20권3호
• /
• pp.162-167
• /
• 2011

In this paper, we propose a vision system using a field programmable gate array(FPGA) and a smart vision chip. The output of the vision chip is varied by illumination conditions. This chip is suitable as a surveillance system in a dynamic environment. However, because the output swing of a smart vision chip is too small to definitely confirm the warning signal with the FPGA, a modification was needed for a reliable signal. The proposed system is based on a transmission control protocol/internet protocol(TCP/IP) that enables monitoring from a remote place. The warning signal indicates that some objects are too near.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 컴퓨터소사이어티 추계학술대회논문집
• /
• pp.187-190
• /
• 2003

본 논문에서는 클라이언트/서버 형태로 신발 공정에 관한 컨베이어 원격 감시 제어 시스템을 웹 기반으로 설계하고 구성하였다. 클라이언트가 원격으로 영상을 감시하고 제어하기 위한 모듈들은 JAVA를 기반으로 제작하였으며, 실시간 제어를 위한 컨베이어 서버는 RTLinux를 기반으로 구성되며, 그 위에서 디바이스 드라이버와 API를 개발하였다. 이러한 소프트웨어 제작과 Lego 기반의 프로토타입핑을 통해 산업 현장에서 웹을 통해 실시간으로 컨베이어를 제어하는 방법을 제시하고자 한다.

• 정보처리학회논문지A
• /
• 제8A권2호
• /
• pp.91-98
• /
• 2001

TCP/IP based remote system using internet presented the method to access and control all the types of resources connected to network system over time and space. In this paper, We studied a resource control method through a mutual communication of a system association composed of service user, provider, and manager of the network system for the web based remote control system. The service users require the resources, and its providers are a variety of devices and digital electronic products which can provide the services in a network system. The service manager who operates the whole system performs the role to interconnect its users with its providers. Through an experiment, an implemented system confirmed flexibility, stability, and extensibility of the method presented in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.122-122
• /
• 2000

Polishing work of a free-curved surface die demands simple and repetitive operations but requires a considerable amount of time for high precision. In out previous study, to reduce the polishing time and solve the problem of the shortage of skilled workers, the automatic polishing system was developed. However, in the polishing process of die, workers have to stay still in factory to monitor the polishing process for a long time in the poor environment. Therefore, this study proposes the remote operation and monitoring system of the automatic polishing robot. The developing system offer worker monitoring functions and teleoperating functions, as following: system state check, manual manipulation mode, automatic mode, manual teaching mode, automatic teaching mode, simulation by virtual manufacturing device. And automatic teaching system is developed to easily obtain a teaching data.