• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.243-245
• /
• 2009

In this paper, wireless remote controller for welderss are implemented using RF communication. It can be used for general welding power sources. Sometimes, wireless remote controllers for welders are needed because welding torches are far away from welding sources in the case of big ship-building or big tank constructions. In order to use the wireless remote controllers, digital cpu-based welding systems are essential for digital interfaces. But, in this paper, using digital resistors makes wireless remote controllers be easily applied to digital or analog welders. To demonstrate the practical significance of our results, some experimental results are presented.

• 로봇학회논문지
• /
• 제5권1호
• /
• pp.64-69
• /
• 2010

In this paper, we propose remote navigation control for intelligent robot using particle swarm optimization(PSO). The proposed system consists of interfaces for intelligent robot navigation and user interface in order to control the intelligent robot remotely. And communication interfaces using TCP/IP socket is used. To do this, we first design the fuzzy navigation controller based on expert's knowledge for intelligent robot navigation. At this time, we use the PSO algorithm in order to identify the membership functions of fuzzy control rules. And then, we propose the remote system in order to navigate the robot remotely. Finally, we show the effectiveness and feasibility of the developed controller and remote system through some experiments.

• 제어로봇시스템학회논문지
• /
• 제13권4호
• /
• pp.329-334
• /
• 2007

This paper deals with self-tuning of fuzzy control systems. The fuzzy logic controller(FLC) has parameters that an: input and output scaling factors to effect control output. Tuning method is proposed for the scaling factor. In this paper. it is studied to control and to monitor the remote system statues using SOAP for communicate between the server part and the client part. The remote control system is controlled by using a web browser or a application program. The server part is waiting for the request of client part that uses internet network for communication each other and then the request is reached. the server part saves client data to the database and send a command set to the client part and then the client part sends command to controller in a cool chamber. The administrator can control and monitor the remote system just using a web browser. The effects of membership functions, defuzzification methods and scaling factors are investigated in the FLC system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.338-342
• /
• 2003

Hybrid machine is based on hardware technologies of machine tool and software technologies of open architecture controller. In machining technology, combination technology of turning, milling, and grinding and in machining energy technology. combination of mechanical, electrical, and chemical technology are developed. This paper describes hybrid machine technology for combination of machining, on-machine measurement, on-machine CAM, and on-machine remote monitoring and control in open architecture controller environment. For on-machine measurement, non-contact measurement technology based on CAD information is developed. For on-machine CAM, interactive CAM program for automatic NC program generation and tool path simulation is developed. For generation on-machine remote monitoring and control, suitable interface method between web program and CNC is proposed. The developed hybrid machine technology is implemented in 3 axes milling machine for evaluation of operablity.

• 전력전자학회논문지
• /
• 제4권6호
• /
• pp.570-578
• /
• 1999

이 논문은 인터넷이나 정보통신망을 이용하여 멀리 떨어져 잇는 기기를 제어하거나 감시하는 원격 제어 시스템을 개발하는 것을 목표로 하고 있다. 이 때 원격 제어용 프로토콜로는 SNMP(Simple Network Manatement Protocol)를 사용하였고, 지역적으로 멀리 떨어져 있는 기기에 대한 실시간 제어 및 감시를 위하여 자바(Java) 환경의 소프트웨어를 구축하였다. 도한 이 논문에서는 네트워크 기기와 응용 기기 사이의 인터페이스 컨트롤러를 제안하여 대부분의 기기에서도 이 원격 제어 시스템을 사용할 수 있다는 가능성을 보였다.

• 한국정보통신학회논문지
• /
• 제14권9호
• /
• pp.2134-2142
• /
• 2010

가정에서 사용중인 가전제품을 제어하는 방법은 적외선 리모컨을 이용한 방식이 대부분을 차지하고 있다. 이러한 레거시 기기들은 각각의 리모컨으로 제어되고 있고 표준화된 통신방식을 제공하지 않아 원격 제어에 어려움이 있다. 통합 리모컨방식의 원격 제어기를 이용할 경우 여러 종류의 기기를 제어할 수 있지만 모든 명령을 지원하지는 않으며, 특히 새로운 명령이나 고유한 명령을 가진 제품이 출시될 경우 확장성에 한계가 있다. 본 논문에서는 레거시 기기의 효율적인 통합 제어를 위해 지그비로 전송되는 명령을 해당 기기의 적외선 제어 명령으로 변환하여 발신하는 Zigbee Bridge를 개발하고, 헤더 판별법을 이용한 학습 기능을 추가 하였다. 새로운 명령이 전송되는 경우 Bridge는 이 명령을 학습하여 저장하며, 기존 명령이 전송되는 경우 저장된 코드를 출력하는 방식을 사용하였다. 이 방식을 사용하는 경우 신규 명령에 대한 확장성과 유연성을 확보 할 수 있으며, 코드 전송의 효율을 향상하여 기존 대비 최대 58.6배 빠른 전송이 가능하다.

• 전기학회논문지
• /
• 제61권2호
• /
• pp.347-353
• /
• 2012

In this paper, authors will develop the quick and precise remote controller of automatic fire detection equipment (P-type one-class receiver) based on information communication technology (IT). The remote controller detects the fire and disaster in the building automatically and quickly and then activates the facilities to extinguish the fire and disaster, monitoring such situation in a real time through wire-wireless communication network. The proposed remote controller is applied a programmable logic device (PLD) micom. of one-chip type which is small size and lightweight and also has highly sensitive-precise reliabilities. The one-chip type PLD micom. analyzes digital signals from sensors, then activates fire extinguishing facilities for alarm and rapid suppression in a case of fire and disaster. The detected data is also transferred to a remote situation room through wire-wireless network of RS232c and bluetooth communication, and then the situation room sends an emergency alarm signal. The automatic fire detection equipment (AFDE) based on IT will minimize the life and wealth loss while prevents fire and disaster.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.136-143
• /
• 2005

Open architecture controller (OAC) is well known technology in factory automation. To better understand the requirements of OAC, authors have discussed the OAC related topics with a number of control experts who represents different segments of the machining industry. There is no common concept that is accepted or used, however, the common ideas for OAC is the control system that is hardware independent, interchangeable, and easily scalable. This paper presents summary of the understaning and requirements of OAC. Based on the requirements of OAC, authors developed the software based PC-CNC. The main focus of the PC-CNC was on the user customization capability and open interface between control networks in manufacturing system. This paper introduces the developed PC-CNC briefly. In addition to introduction of the PC-CNC, to fill the gap between end users and vendors of OAC, this paper presents two applications using OAC. One is a remote monitoring system. The OPC (Ole for Process Control) standard interface was used to monitor the status of open architecture CNC across network. The other is the remote production management module for machine tools using standard database interface.

• 비파괴검사학회지
• /
• 제22권5호
• /
• pp.490-499
• /
• 2002

국내 감마선투과검사용 조사장치는 1,000여대로 2,500여명의 종사자가 대부분 수동으로 원격 조작하는 실정으로 작업의 효율화와 방사선피폭 저감화를 위하여 자동 원격조작기의 사용이 요구된다. 이에 연구팀은 실무에 적합한 토크와 안전계수로부터 $54kgf{\cdot}cm$의 출력을 지닌 24V, 200W의 BLDC모터를 이용하여 $0.4{\sim}1.2m/s$ 범위의 선원 이동 속도를 조절할 수 있는 구동장치와 RF 센서로 구동 속도 조절, 광전센서에 의한 선원 위치 및 timer로 노출시간을 제어할 수 있는 무선 원격조작기를 개발하였다. 이와 같이 개발한 자동원격조작기는 AC 와 DC 겸용, 그리고 기존의 수통 원격조작기에 탈착이 가능하여 자동과 수동을 겸용할 수 있는 경제적 이점 등으로 활용도가 클 것으로 기대된다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.292-297
• /
• 2004

The conventional computerized numerical controller (CNC) of machine tools has been increasingly replaced by a PC-based open architecture CNC (OAC) which is independent of the CNC vendor. The OAC and machine tools with OAC led the convenient environment where it is possible to implement user-defined application programs efficiently within CNC. Tis paper proposes a method of operational fault cause diagnosis which is based on the status of programmable logic controller (PLC) in machine tools with OAC. The operational fault is defined as a disability state occurring during normal operation of machine tools. The faults are occupied by over 70% of all faults and are also unpredictable as most of them occur without any warning. Two diagnosis models, the switching function (SF) and the step switching function (SSF), are propose in order to diagnose the fault cause quickly and exactly. The cause of an occurring fault is logically diagnosed through a fault diagnosis system (FDS) using the diagnosis models. A suitable interface environment between CNC and develope application modules is constructed in order to implement the diagnostic functions in the CNC domain. The diagnosed results were displayed on a CNC monitor for machine operators and provided to a remote site through a web browser. The result of his research could be a model of the fault cause diagnosis and the remote monitoring for machine tools with OAC.