• Journal of the Korea Convergence Society
• /
• v.2 no.3
• /
• pp.7-14
• /
• 2011

This paper deals with the efficient management for the intelligent distribution system related with the renewable energy sources, using the wire-wireless monitoring and control device. This device is mainly composed of 2 sections. One is monitoring device with the Autobase S/W and the other is control device using PLC. This paper proposes a wire and wireless monitoring and control device which can monitor and control the 50Kw PV system installed remotely (about 1Km) in the campus of the Korea University of Technology and Education. By the analysis of PV output characteristic using the device proposed in this paper, it is confirmed that the device can contribute the maintenance of PV system and also the establishment of Smart Grid.

• Journal of the Semiconductor & Display Technology
• /
• v.2 no.3
• /
• pp.13-18
• /
• 2003

A remote monitoring system of the semiconductor equipment is used to monitor or control operations of the equipment. Most of the conventional monitoring systems are based on the client-server model with the general purpose PC. Basically, it implies the difficulties in the system reliability and cost down due to its size and complexity. To overcome these difficulties, we suggest an embedded web server which is based on the low-cost microprocessor. It is designed for the monitoring or controlling a dedicated equipment only. To evaluate the feasibility of the suggested embedded web server, we have implemented a test-board with ATMega103 and programmed the basic modules using the AVR-GCC. Finally, we have tested its operations on the MS Explorer 6.0 environment.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3159-3161
• /
• 1999

This paper aims at developing remote control system to control and monitor distributed various devices through internet or information communication network. SNMP (Simple Network Management Protocol) and UPS (Uninterruptible Power Supply) are adopted for network management protocol and applied device, respectively. For controlling and monitoring distributed devices in real-time, Java-environment software is constructed. Also, general-use interface controller between network device and applied device is proposed. Finally, serial communication such as RS-232 and RS-485 is used between controller and applied device.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.4 s.42
• /
• pp.299-304
• /
• 2006

This paper is for the on-line monitoring and controlling system in which remote central processor execute commands based on data transmitted via radio or cable captured from the industrial or marine environments. By executing the appropriate system commands, many mechanical parts in industrial environments and natural factors such as temperature and humidity are to be under control in the way of normal system condition. In this research, we control the temperature of a hydrochloric acid tank to be within the predetermined range by executing temperature controlling commands issued by remote central computer which decides the appropriate action for the total system based on the received sensor data transmitted via radio and cable media. This type of monitoring and controlling system has the various applications such as the disaster prevention system, ubiquitous embedded system, alarm system, and the USN systems.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.9
• /
• pp.1493-1496
• /
• 2016

This paper proposes a system for reducing the standby power consumption in using the consumer electronic devices such as a television, a home theater, a set-top box, or a DVD player. The system is consisted of a flyback converter, monitoring circuits, a relay and a micro-processor. The proposed system can reduce the standby power consumption by disconnecting the AC input and the consumer devices can be turned on with a remote control. The proposed standby power system consumes the low power to receive the infrared signal from the remote controller. Furthermore, a electronic double layer capacitor is used to store the energy with high efficiency. The proposed power system can operate the 플라이백 converter to charge the electronic double layer capacitor and connect the AC input to the consumer electronic devices. The proposed power circuit can reduce the standby power consumption in AV devices without increasing the cost. The prototype is implemented to verify the system with the commercialized products.

• The KIPS Transactions:PartD
• /
• v.10D no.2
• /
• pp.337-342
• /
• 2003

In this paper, a web based remote control system located at too dangerous field to access for the worker. The system was designed and implemented for three-dimensional stereo camera connected to web server which can be controlled easily by client side person working in the safe monitoring room. The user in the client side can control the vergence/focus control and zoom-in/out and pan/tilt functions through an user interface. The user interface for remote control environment was designed and implemented with Java applet mechanism, and was tested the operation result of the system.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.88-92
• /
• 1999

This paper aims at developing remote contro system to control and monitor distributed various devices through internet or information communication network. SNMP (Simple Network Management Protocol) and rectifier operated in a row are adopted for network management protocol and applied device, respectively. For controlling and monitoring distributed devices in real-time java-environment software is constructed. Also general-use interface controller between network device and applied device is proposed. Finally, seria communication such as RS-232 and RS-485 is used between controller and applied device.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.121.5-121
• /
• 2002

1. Introduction 2. Image Transmission 3. Hardware instrument 4. Image processing and control command transmission 5. System Configuration 6. Conclusion

• 한국정보통신설비학회:학술대회논문집
• /
• 2004.05a
• /
• pp.209-217
• /
• 2004

• Journal of the Korean Solar Energy Society
• /
• v.31 no.6
• /
• pp.72-77
• /
• 2011

The purpose for installation of offshore weather station is a measurement of wind resources and so on. If weather station is operated, it will be possible to analysis for wind resource and arrangement of wind farm by using measured data. In this paper, we carried out the development of offshore wind resource measurement system for measuring offshore wind resource. Also, In order to monitor for real-time wind data with 1 Hz, we installed the wireless transmission system. All wind characteristic data are sent to the server PC through the this system is connected outport of DataLogger. Transmitted wind data were used in order to look at in the Web-page and tablet PC on a real time basis in a graph. In this paper, we will introduce about the wind resource measurement and remote monitoring system that is the result of study.