• Progress in Medical Physics
• /
• v.15 no.3
• /
• pp.156-160
• /
• 2004

An essential quality assurance (QA) procedure in high dose rate (HDR) remote after-loading brachytherapy is that of the verification of the Ir-192 HDR source positioning accuracy. A number of methods using mechanical rulers or autoradiograph and video cameras have been reported to check the positional error of the Ir-192 source. In this study, the feasibility of a CMOS (Complementary Metal Oxide Semiconductor) PC camera, with a fluorescent screen, was investigated. The agreement between the planned and measured dwell position was better than 1 mm and dwell times better than 0.4 sec. Our results indicate that the CMOS PC camera system could be used as a QA tool for the on-line determination of the source position and dwell time.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.17-23
• /
• 2020

Recently, due to increases in the numbers of nursing students, there are many cases of clinical practice in remote areas other than in hospitals near a school. In this regard, the Korea Institute of Nursing Evaluation emphasizes the securing of safety, the provision of regulations, and countermeasures related to long-term practices of nursing students. The purpose of this study is to develop a safety management application for nursing students who are practicing at a distance. This application configuration consists of accommodation location information, nursing student location information check, and notification of the professor in charge. The location information of nursing students was based on their location on weekdays from 10 pm to 11 pm, due to the work schedule of the nursing students. For this reason, nursing students can use this app after their clinical practice; if the student is out of the safety radius or there is a problem, a risk notification can be provided through a service and a rescue request can be made.

• Journal of Internet Computing and Services
• /
• v.21 no.1
• /
• pp.211-219
• /
• 2020

One of the major advancements of the Fourth Industrial Revolution is the use of Internet of Drones (IoD), which combines the Internet of Things (IoT) and drone technology. IoD technology is especially important for efficiently and economically operating C4ISR operations in actual battlefields supporting various combat situations. The purpose of this study is to solve the problems of limited battery capacity of drones and lack of budgeting criteria for military drone transcription, introduction, and operation. If the mission area is defined and corresponding multi-drone hovering check points and mission completion time limits are set, then an energy and time co-optimized scheduling and operation control scheme is needed. Because such a scheme does not exist, in this paper, a Drone Force Deployment Optimization (DFDO) scheme is proposed to help schedule multi-drone operation scheduling and networked based remote multi-drone control.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.1-6
• /
• 2014

Companies almost don't use an integrated control system using expensive network system in multimedia like TV and DID, despite IP-Broadcasting and communication equipment have expanded rapidly. The proposed integrated TCU(terminal control unit) is a control device that supports TV power On/Off check and remote control, power control reservation function, TV channel change, a variety of interface supports of input/output AC power & Lan port, RS-232C and IR using existing IP network after there is installed the Wake-on -Lan in the set-top box. The TCU can control and monitor 24 hours unlike existing low-cost control system RF method. In existing control equipment markets without expandability and low price, the TCU development including 24 hours monitoring and automatic control functions is expected to secure a wide range of companies.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.11
• /
• pp.1-8
• /
• 2020

In this paper, we proposed a smart greenhouse system that can easily grow plants indoors without professional knowledge by using the criteria of factors affected by common plants (temperature, humidity, soil humidity), and implemented a system that can check the greenhouse state in real time and control the device remotely through mobile applications. Based on Raspberry pie and Arduino, the system measures the state of greenhouse in real time through sensors and automatically controls the device. After growing and experimenting with plants in a greenhouse for a certain period of time, it was confirmed that the environment suitable for each plant was maintained. Therefore, the smart greenhouse system in this paper is expected to improve plant cultivation efficiency and user convenience and also increase beginners' access to plants.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.5
• /
• pp.327-334
• /
• 2009

The tiled-display system provides a high resolution display which can be used in different applications in co-working area. The systems used in the co-working field usually save the user logs, and these log information not only makes the maintenance of the tiled-display system easier, but also can be used to check the progress of the co-working. There are three main steps in the proposed tiled display log recorder. The first step is to capture the screen shots of the tiles and send them for merging. The second step is to merge the captured tile images to form a single screen shot of the tiled-display. The final step is to encode the merged tile images to make a compressed video stream. This video stream could be stored for the logs of co-working or be streamed to remote users. Since there could be differences in capturing time of tile images, the quality of merged tiled-display could be degraded. This paper proposes a time stamp-based metric to evaluate the quality of the video stream, and a merging algorithm that could upgrade the quality of the video stream with respect to the proposed quality metrics.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.106-114
• /
• 2018

DEM(Digital Elevation Model) are now easily produced with advancing remote sensing technology. Depending on desired task, UAV can produce high resolution DEM. But high resolution comes with issues of data storage and processing time and cost. To check the effect of DEM resolution, this study compares six geomorphological parameters derived from different resolution DEM in a test area around Chuncheon, Korea. The comparison analysis was based on statistics of each derivatives of slope, curvature, flow direction, flow accumulation, flow length and basin. As a result, it was found that DEM remained unchanged and so did the flow accumulation area. However, slope, curvature, flow length and basin numbers were decreased with the normalization of increasing pixel size. DEM resolution should be carefully selected depending on the precision of application required.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.43-48
• /
• 1998

Prior to launch, simulated radiances of the Ocean Scanning Multispectral Imager (OSMI) will be very useful to guess the real imagery of OSMI and to check the data processing system for OSMI. The data processing system for OSMI which is one sensor of Korea Mult i - Purpose Satellite (KOMPSAT) scheduled for launch in 1999 is being developed based on the SeaWiFS Data Analysis System (SeaDAS). Such a simulation should include the spectral bands, orbital and scanning characteristics of the OSMI and KOMPSAT spacecraft. The simulation is also very helpful for finding and preparing for problem areas before launch. This paper describes a method to create simulated radiances of the OSMI over the oceans. Our method for constructing a simulated OSMI imagery is to propagate a KOMPSAT orbit over a field of Coastal Zone Color Scanner (CZCS) pigment values and to use the values and atmospheric components to calculate total radiances. A modified Brouwer - Lyddane model with drag was used for the realistic orbit prediction, the CZCS pigment data were used to compute water - leaving radiances, and a variety of radiative transfer models were used to calculate atmospheric contributions to total radiances detected by OSMI. Imagery of the simulated OSMI total radiances for 6 nominal bands was obtained. As expected, water - leaving radiances were only a small fraction of total radiances and sun glint contaminations were observed near the solar declination. Therefore, atmospheric correction is very important in the calculation of pigment concentration from total radiances. Because the imagery near the sun's glitter pattern is virtually useless and must be discarded, more advanced mission planning will be required.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.225-233
• /
• 1998

It is necessary to check the water quality of the lake on a continuous basis to determine the appearance of water pollution; however, it not only takes much time and expenses but it is considerably difficult to investigate the wide range of the area. If we use the remote sensing technique through the use of satellites, the status of water quality can be checked covering many wide areas simultaneously; and because the same area can be measured on a periodic basis, it is extremely effective in investigating the water quality. Furthermore, as some of the Landsat sensors carry characteristics which sense objects according to wave length, the distribution of water quality can be checked relatively accurately within a short period of time, while its image can be displayed in color. Hence, this research has attempted to extract water quality elements, such as transparency, water depth, and surface water temperature by utilizing the satellite data, and has prepared the water quality distribution image map of the Lake Hwajinpo by presenting the related empirical formula of the water quality elements. If the water quality distribution image map is prepared after extracting the water quality elements from the DN of the Landsat TM image and then carrying out TIN analysis through the use of GIS, relatively more accurate pattern can be learned covering a wide rage of area than the pattern presented based on the value obtained from actual observation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.1
• /
• pp.60-64
• /
• 2004

In this paper, we implemented a real-time remote home monitoring system which we have ported the Linux OS and HTTP(Hypertext Transfer Protocol) web server. The GoAhead web server was ported using by ARM cross compiler. And then we used the analog to digital converter ADC0809 for sensing the vii able input signal at widely separated home. We have implemented linux device driver for ADC(Analog to Digital Convertor) and CGI-C(Common Gateway Interface - C language) application program using Client pull method for monitoring real-time changing data. The factor of monitoring is temperature, intensity of illumination and gas's existence. And this system has ability which check the status of out door and gas valve. We have designed the embedded web server system for home emergency monitoring in low cost.