• 디지털콘텐츠학회 논문지
• /
• 제5권1호
• /
• pp.22-27
• /
• 2004

밀폐 및 차폐 공간을 갖는 핫셀에서 사용후핵연료와 같은 고방사선 물질을 취급하고 있으며, 핵주기시설에서 마스터-슬레이브 매니퓰레이터는 원격취급장비로서 널리 사용되고 있다. 본 연구에서는 차세대관리공정의 디지털 목업을 구축하고 원격유지보수를 위한 매니퓰레이터의 작업영역 및 작업분석을 수행하였다. 실제 환경과 동일한 가상 작업환경을 갖는 디지털 목업은 3차원 그래픽으로 모델링된 공정장치 및 원격 취급장비들로 구성된다. 모델링된 매니퓰레이터는 기구학 및 동작범위에 대한 속성을 부여되고 외부 입력장치는 space ball을 사용하여 매니퓰레이터의 동작을 구현하였다. 또한 Tele-operation 인터페이스를 사용하여 6축 외부 입력장치와 연계한 시스템을 개발하였으며 외부 입력에 따른 매니퓰레이터의 동작에 대한 동기는 만족할 만한 응답을 보였다. 이는 가상환경에서 작업자 교육을 위한 시스템 개발에 유용할 것이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.821-824
• /
• 1993

In hazardous conditions, where entry of human operators is restricted, such as high radiation regions in nuclear facilities, a lot of remote inspections and remote handling tasks must be performed. In this study, the stereo imaging system has been developed and the remote handling technique, has been studied to enhance the efficiency of tele-operation. The nozzle dam handling robot is one of the most important robots applied to nuclear facility. The robot will be equipped with the developed stereo imaging system. The stereo imaging system will outstandingly improve the tele installing/removal tasks for nozzle dam.

• 비파괴검사학회지
• /
• 제23권5호
• /
• pp.520-525
• /
• 2003

Fast Breeder Test Reactor (FBTR) is a 40MW (thermal) / 13.2MW (electrical), Plutonium - Uranium mixed carbide fuelled, sodium cooled, loop type nuclear reactor operating at Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam. Its main aim is to generate experience in operation of fast reactors and sodium systems and to serve as an irradiation facility for development of fuels and structural materials fur fast reactors. Nuclear reactors pose difficulties to the NDT techniques used to monitor the conditions of the internal components. Sodium cooled fast breeder reactors have their own typical difficulties in using the NDT techniques. These are due to the need for operation in aggressive environment of nuclear radiation and sodium (molten/vapour), as well as the need to maintain leak tightness of a very high order during all states of reactor operation and shutdown for fuel handling, maintenance and remote inspection. This paper discusses the following NDT techniques, which have been successfully used for the past 15 years in FBTR: (i) Periscope and Projector, (ii) Core Co-ordinate Measuring Device and, (iii) Optical fiberscope. The inspection using these techniques have given confidence for further reactor operation at high power by giving useful data on the conditions of the components inside the reactor vessel.

• 대한원격탐사학회지
• /
• 제29권3호
• /
• pp.337-349
• /
• 2013

Communication Ocean Meteorological Satellite (COMS) for the hybrid mission of meteorological observation, ocean monitoring, and telecommunication service was launched onto Geostationary Earth Orbit on June 27, 2010 and it is currently under normal operation service on $128.2^{\circ}$ East of the geostationary orbit since April 2011. In order to perform the three missions, the COMS has 3 separate payloads, the meteorological imager (MI), the Geostationary Ocean Color Imager (GOCI), and the Ka-band antenna. The MI and GOCI perform the Earth observation mission of meteorological observation and ocean monitoring, respectively. For this Earth observation mission the COMS requires daily mission commands from the satellite control ground station and daily mission is affected by the satellite control activities. For this reason daily mission planning is required. The Earth observation mission operation of COMS is described in aspects of mission operation characteristics and mission planning for the normal operation services of meteorological observation and ocean monitoring. And the first one-year normal operation results after the In-Orbit-Test (IOT) are investigated through statistical approach to provide the achieved COMS normal operation status for the Earth observation mission.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 1999년도 추계학술대회
• /
• pp.183-189
• /
• 1999

Nowadays advanced manufacturing companies are trying to find a way to check the performance of their production equipments and plants from remote sites. However, it is hard to monitor the status of machine or to check the performance of the processes because the regional limitation of distributed environment. This paper presents research results in the real time monitoring of machining processes and internet_based operation of machining centers via internet, which is implemented using VRML and JAVA.

• 대한산업공학회지
• /
• 제40권4호
• /
• pp.388-395
• /
• 2014

Nowadays unmanned ground systems are used in supporting of surveillance and explosive ordnance disposal. Also, we expect that will be used to remarkably enhance combat capability through network-based cooperative operations with other combat systems. In order to effectively develop those unmanned systems, we needs a systematic method to analyze combat effectiveness and validate required operation capabilities. In this paper, we propose a practical approach to simulate remote-operated unmanned ground systems by using OneSAF, an US-Army simulation framework. First of all, we design a simulation model of unmanned system by integrating with core components for wireless communications and remote control of mobility and fire. Next, we extend OneSAF functionality to create communication links that connects a remote controller with an unmanned vehicle and define a simulated behavior to operate unmanned vehicles via the communication links. Finally, we demonstrate the feasibility of the proposed model within OneSAF and summarize system effectiveness analysis results.

• 한국멀티미디어학회논문지
• /
• 제24권2호
• /
• pp.267-273
• /
• 2021

Recently, the small-size mobile robots with remote-control are rapidly growth which market of mobile is increased in the world. Especially, the smart-phones are widely used for interface device in the small size of a mobile robot. The research goal is control system design which is applied to miniaturization of a mobile robot using smart-phone and it can be confirmed performance for designed system. Meanwhile, the fabrication of mini-mobile robot can also be remote-control operation through the WIFI performance of a smart-phone. The smart-phone is used to remote-control for robot operation which control data transmit to robot via the WIFI network. To drive the robot, we can observe by the smart-phone screen and it can easily adjust the robot drive condition and direction by smart-phone button. Consequentially, there was no malfunction and images were printed out well. However, in drive, because of blind spot, robot was bumped into obstacle. Therefore, the additional test is necessary to sensor for blind spot which sensor can be equipment to mobile robot. In addition, the experiment with robot object recognition is needed.

• 풍력에너지저널
• /
• 제2권1호
• /
• pp.90-96
• /
• 2011

The purpose of this paper is to describe the control system for optimal performance of 2MW gearless PMSG wind turbine system, and to afford some techniques of the algorithm selection and design optimization of the wind turbine control system through analysis of load calculation and control characteristic. Wind turbine control system is composed of the main control system and remote control and monitoring system. The main control system is industrial PC based controller, and the remote control and monitoring system is a server based computer system. The main control system has a supervisory control of the wind turbine with operation procedures and power-speed control through the torque control by pitch angle. There are some applications to optimize the wind turbine system at the starting mode with increasing of rotor speed, and cut-in operating mode to prevent trundling cut-in and cut-out, a gain scheduling of pitch PID controller, torque scheduling and limitation of generation power by temperature limitation or remote command by remote control and monitoring system. Also, the server operation program of the remote control and monitoring system and the design of graphical display are described in this paper.

• Current Research on Agriculture and Life Sciences
• /
• 제9권
• /
• pp.11-20
• /
• 1991

본(本) 연구(硏究)는 인체(人體)에 해(害)로운 농약(農藥)으로 부터 운전자(運轉者)를 보호(保護)하기 위하여 무인(無人) 스피드 스프레이어를 개발(開發)할 목적(目的)으로 수행(遂行)하였으며 무선(無線) 전파(電波) 리모콘에 의한 원격제어(遠隔制御) 시스템을 개발(開發)하기 위하여 수행(遂行)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 234채널, 16명령을 발신(發信)할 수 있는 VHF 대 전파(電波) 리모콘을 제작(製作)하여, 스피드 스프레이어의 원격제어(遠隔制御)에 편용가능(便用可能)하였다. 2. 시판(市販)되고 있는 무선전화기(無線電話機)의 방식(方式)인 DTMF방식(方式)을 채용(採用)한 무선 리모콘을 사용(使用)할 경우 시판 무선전화기(無線電話機) 사용(使用)이 가능(可能)하여 송수신(送受信)기의 별도(別途) 제작(製作)이 필요 없는 잇점이 있었다. 3. 무선(無線) 전파(電波) 리모콘과 원칩 마이크로 컴퓨터를 이용(利用)하여 염가(廉價)이고 컴팩터한 원격조종(遠隔操縱) 조향장치(操向裝置) 및 원격조종(遠隔操縱) 변속장치(變速裝置), 원격조종(遠隔操縱) 약액(藥液) 살포장치(撒布裝置) 등(等)의 원격제어(遠隔制御) 시스템 제작(製作)이 가능(可能)하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3073-3078
• /
• 2011

Driverless Train Control System has been recently introduced and commercialized in Korea. It is expected that the vehicle with driverless operation system will be used in new lines such as Sinbundang line soon. Therefore it is necessary to change the system operation and conception of the existing train operation system and the necessity of driverless vehicle monitoring system meeting a new paradigm is rising. In order to dispel concerning about safety issues caused by driverless train operation, the importance to establish vehicle error detection, useful fault diagnosis and rapid action plans is higher than ever. For this, efficient and higher level of vehicle supervision & control system should be essentially supported. In this study, remote driverless vehicle monitoring system using by radio communication is suggested to be used for monitoring and controlling important parts of the vehicle and diagnose and take quick actions when vehicles are in trouble at control tower at real time.