• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.449-452
• /
• 2005

For home networking system with a function of air quality monitoring, a wireless sensor module with several air quality monitoring sensors was developed for indoor environment monitoring system in home networking. The module has various enlargements for various kinds of sensors such as humidity sensor, temperature sensor, CO2 sensor, flying dust sensor, and etc. The developed wireless module is very convenient to be installed on the wall of a room or office, and the sensors in the module can be easily replaced due to well designed module structure and RF connection method. To reduce the system cost, only one RF transmission block was used for sensors' signal transmission to 8051 microcontroller board in time sharing method. In this home networking system, various indoor environmental parameters could be monitored in real time from RF wireless sensor module. Indoor vision was transferred to client PC or PDA from surveillance camera installed indoor or desired site. Web server using Oracle DB was used for saving the visions by web-camera and various data from wireless sensor module.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.282-284
• /
• 1999

This paper presents an accurate algorithm for fault location of a single phase to earth fault on a two-parallel transmission line using only one-terminal data. It is impossible to calculate the accurate fault distance, because of the unknown fault resistance and fault current at the fault point. The faulted line circuit and the zero-sequence circuit of two-parallel line are used as a fault location model, which the source impedance of the remote end is not involved. The algorithm can eliminate the effect of load flow and the fault resistance in calculating the fault location.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.33-33
• /
• 2000

In this paper a new distributive control system for BA(Building Automation ) lighting control used on general microprocessors is presented. For optimal lighting control and saving energy, The system have to control the group and pattern lighting control as well as individual light control at one time. Tn this paper, This functions are accomplished with low-cost and simple microprocessor. A plurality of modulated light control terminals are connected to the central control unit through a pair of power line. This power line provide both power and signal to the each terminal and the data is transmitted through cyclic time division multiplex transmission. With this structure a low-cost distributive control system for lighting applications has been achieved, allowing energy and maintenance saving and reliability increase of the light control system.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.457-459
• /
• 2004

The Channel Coding Unit (CCU) is an integral component of Payload Data Transmission System (PDTS) for the Multi-Spectral Camera (MSC) data. The main function of the CCU is channel coding and encryption. CCU has two channels (I & Q) for data processing. The input of CCU is the output of DCSU (Data Compression & Storage Unit). The output of CCU is the input of QTX which modulate data for RF communication. In this paper, there are the overview, short H/W description and operation concept of CCU.

• 한국조경학회지
• /
• 제30권6호
• /
• pp.66-78
• /
• 2003

The purpose of this study was to minimize the forest disturbance around an entry road of a power transmission tower construction site between Taean and Sinsesan, Chungnam. The main study field was classified into existing materials and a GIS, remote sensing analysis, and a field examination. This information was used to identify the most suitable entry road using a degree of green naturality map, eco-naturality map, actual vegetation map, and a forest state map as the existing materials. Also, the study used an normalized difference vegetation index, altitude and slope map in order to make the evaluation materials which used an remote sensing image, and GIS. This data was used to choose an optimum area, and diagnosed the current condition of the vegetation with a field survey of the area. It analyzed vegetation structure, species diversity, the age of trees in a field examination. Subsequently, we proposed four area types based on the analysis results--preservation area, transplantation area, restoration area and development area. As a result, the preservation area was categorized into 8 grades, according to the degree of green naturality, large area of breast diameter at Pinus densiflora community, competition area of Pinus densiflora and Quercus spp. and Quercus spp. community of over 20 years old. A transplantation area established 46 optimum areas according to the GIS analysis and vegetation investigation results. Vegetation restoration plan for disturbance area should be made based on ecological value of existing vegetation to worthwhile area as Quercus spp. mixing forest proposed. The development area selected a ecological worthless place as an artificial forest where Pinus densiflora and Pinus thunbergii growth is poor. This research results suggest that restoration of vegetation will be possible in the real world. Also, ecological restoration guidelines will be made through building and analyzing data base and routine monitoring of transplantation and restoration area.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제8권12호
• /
• pp.297-304
• /
• 2019

통신, 센서, 인공지능 등의 기술 발전으로 인해 스마트 팩토리 구축이 진행되고 있다. 스마트 팩토리는 기존의 자동화 공정에서 생산되는 데이터를 대상으로 기계 학습과 같은 지능화 기술을 활용해 효율적인 공정 제어를 목표로 한다. 스마트 팩토리로의 구축으로 인해 생산성이 높아지지만 비용도 높아진다. 따라서 소규모 업체들은 스마트 팩토리로 단계별 전환이 효율적이다. CNC 절단기 기반의 소규모 스마트 팩토리 구축을 위해서 본 논문에서는 기존 제조 장비의 데이터를 수집, 모니터링 및 제어할 수 있는 원격 제어 시스템을 제안한다. 원격 제어 시스템의 구조 및 설계와 효율적인 센싱 데이터 전송 방법 등을 제시하였다. 실현 가능성을 검증하기 위해 CNC 절단 장비를 대상으로 시스템을 구현하였고 기능을 검증하였다. 성능 평가를 위해 모니터링 웹 페이지 접속시간을 측정하였고, 구현된 시스템이 사용 가능한 수준이라는 것을 확인하였다.

• 스마트미디어저널
• /
• 제7권4호
• /
• pp.52-60
• /
• 2018

마이크로그리드(MG:Microgrid)의 에너지 관리 시스템(EMS:Energy Management System)은 마이크로그리드 내 기기로부터 데이터를 수집, 분석하여 운영자를 비롯하여 사용자 및 타 시스템에 정보를 제공한다. 이 과정에서 유무선 통신망을 통하여 안전하게 정보를 제공하기 위한 방법이 필요하다. 본 논문에서는 마이크로그리드 내의 장치로부터 데이터를 수집하는 RTU(Remote Terminal Unit)와 EMS간의 데이터 전송 과정에서 발생 가능한 데이터의 노출 및 변조로부터 안전한 시스템을 개발하기 위하여 암/복호화, 키 관리 및 키 분배, 메시지 인증 기능을 제공하는 모듈을 설계, 구현하였다. RTU에 대해 하나의 VD(Virtual Device)를 연결하여 통신함으로써 RTU에 대한 연결 관리 및 키 관리의 효율성을 증대할 수 있다.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.293-301
• /
• 2020

Consultation with the patient and doctor is very important in the examination. However, if the consultation cannot be done directly, such as corona virus, it is difficult for the doctor to determine the patient's condition more accurately. Recently, an image counseling system has been developed based on the Internet, but in the case of heart disease, remote medical counseling cannot be performed because it is not possible to stethoscope the heart sounds remotely. In order to solve this problem, it is necessary to develop an interactive mobile robot capable of remote medical consultation, and a doctor and a patient should be able to set a planting sound during consultation and transmit it in real time. In this paper, we developed a robot that can remotely control a medical counseling robot to move to a hospital room where patients are hospitalized, and to consult a patient in the room remotely from a doctor's office. A remote medical imaging stethoscope system for real-time heart sound transmission is presented. The proposed system is a kind of P2P communication that transmits video information, audio information, and control signal independently through webRTC platform, so that there is no data loss. Consults and sees doctors in real time and finds it more effective than traditional methods for patient security. The system implemented in this paper will be able to perform remote medical care in the place where the spread of diseases between humans like the recent corona 19 as well as the remote medical care of heart disease patients in the future.

• 정보기술과데이타베이스저널
• /
• 제3권2호
• /
• pp.3-24
• /
• 1996

In this paper a data replicator scheme with a distributed join architecture is suggested with its cost functions and the performance results. The contribution of this scheme is not only minimizing the number of base relation locks in distributed database tables but also reducing the remote transmission amount remarkably, which will be able to embellish the distributed databse system practical. The differential files that are derived from the active log of the DBMS are mainly forcing the scheme to reduce the number of base relation locks. The amount of transportation between relevant sites could be curtailed by the tuple reduction procedures. Then we prescribe an algorithm of data replicator with its cost function and show the performance results compared with the semi-join scheme in their distributed environments.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1156-1158
• /
• 2003

The FGI is an integral component of the MSC test equipment and is situated in a slot along the ISA bus of the test equipment PC. The main function of the FGI is an interface between the MSC image data via hotlink interface and Frame Grabber. The FGI has two independent receiving channels that allow the board to receive image data arriving. The FGI also includes two transmission channels with hotlink transmitters. Additionally, the FGI is capable of generating digital video test patterns to test the NUC.