• 융합신호처리학회논문지
• /
• 제1권2호
• /
• pp.145-152
• /
• 2000

DNC(Direct Numerical Control) 네트워크 시스템에 대한 프로그램을 효율적으로 하기 위해서 현재 많은 시스템들이 개발되어 지고있다. 그러나 이 시스템들은 원거리 상의 컴퓨터와 머시닝 센터간에 상호연결이 원만하지 않아 작업에 비효율적인 면이 있고, 또 머시닝 센터의 데이터 송$\cdot$수신에서 오류가 발생되면 시스템에서 운영자가 적절한 대처를 할 수가 없다는 문제점이 있다. 그래서, 본 논문에서는 DNC Network을 통해 NC Controller에서 컴퓨터의 데이터를 오류가 없이 수신이 가능한 데이터 원격제어 시스템을 새로이 구성하였다. 이 데이터 원격제어 시스템의 주요 장점으로는 머시닝 센터에서 운영자가 쉽게 컴퓨터에 저장된 NC데이터의 호출과 송출이 자유롭고, 컴퓨터와 공작기계간의 상호대화가 없어도 NC기계 상에서 원격제어(Remote Control)가 가능하다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1571-1574
• /
• 2003

A shared compliant control scheme based on IMC is proposed for the position-force force reflecting control system. The controller of the slave manipulator is designed by IMC method for the open loop unstable plant. The compliant control is implemented by first order low pass filter. In the proposed scheme, the slave manipulator well tracks the position of the master manipulator in free space and the compliance of the slave manipulator is autonomously controlled in contact condition. The simulation results show that the excellence of the proposed controller.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.612-615
• /
• 2002

This paper begin a new approach in the water-gate control using radio communication. The dissertation is on the controllable device development of water-gate in the remote distance from water-gate trough the transceiver by radio communication. The proposed water-gate control device is simpe in structure, an suitable for implementation of water-gate control in the remote distance. The remote controller water-gate device inspected the up and down motion of water-gate through the LCD displayer, so that it was very safety driving about the surroundings imformation, over loading and position of water-gate, and so on.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.811-814
• /
• 1993

The development of fuzzy pan/tilt controller for remote handling in hostile environment is presented in this paper. In remote handling, control of the camera system is somewhat tedious and time consuming. Operators should do the two tasks of manipulating teleoperator and camera pan/tilt at the same time. By automating pan/tilt control, we expect operators could concentrate only on remote operation. When operators control camera pan/tilt they use simple linguistic rules such as "If the position of end effector on TV monitor is at the edge of the screen, control pan/tilt to display the end effector near the center of the screen." Such a rule is similar to fuzzy logic, so we used fuzzy logic controller to control camera pan/tilt. pan/tilt.

• Nuclear Engineering and Technology
• /
• 제41권1호
• /
• pp.71-78
• /
• 2009

One of main concepts involved in regional small nuclear reactors is unmanned remote control. Internet-based virtual private networks provide environments for the remote monitoring and control of geographically-dispersed systems, and with the advances in communication technologies, the potential of networks for real time control and automation becomes enormous. However, networked control has some problems. The most critical is delay in signal transmission, which degrades system stability and performance. Therefore, a networked control system should be designed to account for delay. This paper proposes some design approaches for a delay-tolerant system that can guarantee predetermined stability margins and performance. To accomplish this, the reactor plant is modeled with consideration of uncertainties. With this model, three kinds of controllers are developed using different methods. The designed systems are compared with respect to stability and performance, and a second-order controller designed using the table lookup method was found to give the most satisfactory results.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.375-379
• /
• 2001

본 논문에서는 원격제어 되는 화상로봇에 대한 개발에 관하여 서술하였다. 개발된 로봇은 크게 로봇 제어부와 Host PC 에서의 Visual I/F program으로 구성되어 있다. 개발된 로봇의 구동부와 Camera의 구동부는 2자유도를 갖고 있으며 유저 친화적으로 개발된 Joystick으로 원격조종된다. 화상 및 명령 센서 데이터 등을 각각 900MHz와 44MHz RF로 통신된다. 개발된 시스템의 효율성을 100m 범위의 야외 시험장에서 운용되어 검사되었다.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.89-97
• /
• 2003

The faults diagnosis of machine tool, which is controlled by CNC(Computer Numerical Control) and PLC(Programmable Logic Controller), is generally based on ladder diagram of PLC because sequential controls for CNC and servo motor are mostly processed in PLC. However, when fault is occurred, a searching of logical relationship for fault reasons is required a lot of diagnosis experiences and times because PLC program has step structure. In this paper, FDS(Fault Diagnosis System) is developed and implemented to machine tool with open architecture controller in order to find the reason of fault fast and correctly. The diagnosed reasons for fault are remote serviced on web through developed RSS(Remote Service System). The operationability and usefulness of developed system are evaluated on specially manufactured machine tool with open architecture CNC. The results of this research can be the model of remote monitoring and fault diagnosis system of machine tool with open architecture CNC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.750-753
• /
• 2003

In this paper, we have developed the web-based management system for greenhouse teleoperation. The remote control system consists of database, web-server, controller in greenhouse, and clients. The database in the server stores user informations and greenhouse conditions, and is used to manage user login and conditioning data. The management system developed by using Java applet, which is a client program for effective and easy management of greenhouse, monitors the greenhouse in real time. Master and driver boards installed in greenhouse control unit. Database on flowering to collect and analyze data exchanges data with the server. The greenhouse can be managed effectively by timer routine, repeat control within setting time, and algorithm of setting points. Also, the greenhouse conditions can be controlled by manual or remote controller (PC) through web browser in internet. Furthermore, all of the control devices of the greenhouse are managed by remote control using PC and checked via camera installed in greenhouse.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.22-29
• /
• 1993

A remote control system was developed in order to operate by push-buttons the conventional drum and chute components, which have been operated manually, in a concrete mixer-truck. As actuators, a hydraulic power unit was used for chute operations: two DC motors for drum operations. The devised drum controller consisted of three electric circuits : an analog proportional-integral control circuit, a drum acceleration circuit, and an emergency stop circuit. The remote control system was installed to be tested experimentally and then was evaluated to work successfully with a desirable accuracy.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제6권11호
• /
• pp.621-628
• /
• 2016

최근 생산되고 있는 가전제품용 리모컨들은 한 가정 당 가전제품 수만큼 생산되고 있고 새로 가전제품이 출시되고 있지만 각각의 기능만을 수행하는 것으로 나뉘어져 새로운 리모컨이 계속 늘어나는 상태이다. 그래서 처음 사용하는 사용자들한테는 여러 리모컨을 사용하여야 하기 때문에 어려움이 있고 부피도 커서 여간 불편한 것이 아니다. 최근에서야 실용적으로 사용할 수 있는 통합리모컨을 SAMSUNG 이나 LG 같은 대기업에서도 여러 형태로 생산하고 있는 추세다. 본 논문에서는 각 회사마다의 적외선 리모컨에서 사용되는 커스텀 코드 식별 방식을 통해 데이터 형식과 적외선 리모컨의 송신, 수신 방법을 설명하고, ATmega128 리모컨 실험을 통해서 일반 리모컨과의 크기나 특징 및 차이점을 볼 수 있게 하였다. ATmega128 을 이용하여 LCD에 나타나 있는 여러 회사의 가전제품을 제어하는 것을 볼 수 있게 하였고, 결과적으로 각각의 기능만을 가진 여러 개의 리모컨의 수를 줄이는 것을 볼 수 있고, ATmega128을 사용한 통합 리모컨으로 가정 내에 있는 가전제품을 다룰 수 있다.