• 한국지반공학회논문집
• /
• 제18권1호
• /
• pp.49-57
• /
• 2002

오염지반 정화를 위한 Electrokinetic 처리 과정에서 지반에 전류를 적용하면 흙물 시스템 내에서 발생하는 유체의 이동 현상과 계면의 특성 변화가 발생하여 Electrokinetic 반응에 영향을 미친다. 본 논문에서는 지반 내에서 발생하는 전기적, 화학적 변수와 그 변화 특성을 규명하고자 실내실험을 수행하여, 시료의 전압, 전류, 제타포텐셜, pH등의 전기 화학적 현상을 연구하였으며 이러한 인자들의 특성변화를 모델링하는 기법을 제시하였다. 그 결과 정화 도중 전압, 전류 변화를 각 농도에서 시간에 따른 지수함수로 표현할 수 있었으며 제타포텐셜의 변화를 pH와 오염농도에 따라 모델링 할 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.553-562
• /
• 2008

A remediation technique for buried pipeline system subject to permanent ground deformation is proposed. Specifically, EPS (expanded polystyrene) geofoam blocks are used as low density backfill, thereby reducing soil restraint and pipeline strains. In order to evaluate this remediation technique, a series of 12 centrifuge model tests with HDPE pipe were performed. The amount or spatial extent of the low density backfill was varied, as well as the orientation of the pipe with respect to the fault offset. Specifically, in the $-63.5^{\circ}$ test, the orientation was such that the pipe was placed in flexure and axial tension. The $-85^{\circ}$ orientation placed the pipe mainly in flexure. In all cases, the behavior of the remediated pipe was compared to that for the unremediated pipe. The geofoam backfill was successful in improving pipe behavior for two of the three pipe/fault orientations. However, for the $60^{\circ}$ orientation, the pipe buckled in compression irrespective of the geofoam backfill.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권3호
• /
• pp.14-20
• /
• 2016

Remediation of crude oil contaminated soil is complicate and hard to apply traditional methods because of its persistency, durability, and high viscosity. Therefore, in this study, the efficiency of crude oil contaminated soil remediation was tested by developing a pilot-scale thermal desorption system using the indirect heating method with an exhaust gas treatment. Under optimal condition drawed by temperature and retention time, the remedial efficiency of crude oil contaminated soil and treatability of exhaust gas were analyzed. Total Petroleum Hydrocarbon (TPH) concentration of crude oil contaminated soil was decreased to 69.7 mg/kg on average and the remedial efficiency was measured at 99.60%. Through the exhaust gas, 86.0% of Volatile Organic Compounds (VOC) was degraded and 97.16% of complex malodor was reduced under the suggested optimum operation condition. This study provides important basic data to be useful in scaling up of the indirect thermal desorption system for the remediation of crude oil contaminated soil.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권4호
• /
• pp.73-80
• /
• 2012

The objectives of this research were to study the applicability and limitations of permeable reactive barrier (PRB) for the removal of tetrachloroethylene (PCE) from the groundwater. PRB column tests were conducted using reactive material with Moringa Oleifera Mass - Bentonite (Mom-Bentonite). Most of the PCE in the groundwater was degraded and/or captured (sorpted) in the zone containing activated material (MOM-Bentonite). The removal rate of PCE from the groundwater was 90% and 75% after 30 days and 180 days, respectively. The effect of micro-organisms on the long-term permeability and reactivity of the barrier is not well understood. MOM-Bentonite PRB system in this research has the potential to be developed into an environmentally and economically acceptable technology for the in situ remediation of PCE-contaminated groundwater.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.148-151
• /
• 2003

Soil washing was applied as a supplementary step of soil remediation at a petroleum oil contaminated site. A soil washing system was designed, assembled, and operated at the site. A field screening method with PetroFlagTM was adopted at the site to find the exact boundary of contaminated area as soil excavation progressed and to verify the concentration of treated soil. The system operation showed the cleanup efficiency of 90% at the compatible cost compared to other methods.

• 자원환경지질
• /
• 제54권2호
• /
• pp.247-257
• /
• 2021

The study area has been contaminated with explosive materials and heavy metals for several decades. For the design of the pump and treat remediation method, groundwater flow before and during groundwater pumping in a contaminated aquifer system was simulated, calibrated, and predicted using a generalized multidimensional hydrological numerical model. A three-dimensional geologic formation model representing the geology, hydrogeology, and topography of the aquifer system was established. A steady-state numerical simulation with model calibration was performed to obtain initial steady-state spatial distributions of groundwater flow and groundwater table in the aquifer system before groundwater pumping, and its results were illustrated and analyzed. A series of transient-state numerical simulations were then performed during groundwater pumping with the four different pumping rates at a potential location of the pumping well. Its results are illustrated and analyzed to provide primary reference data for the pump and treat remediation method. The results of both steady-state and transient-state numerical simulations show that the spatial distribution and properties of the geologic media and the topography have significant effects on the groundwater flow and thus depression zone.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권6호
• /
• pp.17-28
• /
• 2010

As a preliminary survey to improve efficiency of well-based permeable reactive barrier system for groundwater remediation, this site-scale study was carried to identify the flowpaths and controlling factors of plume at a remediation site in Suwon City, Korea. A total of 22 monitoring wells were installed as a grid system in the $4m{\times}4m$ square area by 1-m interval. For the groundwater characterization, various tests were performed including water-level monitoring, water sampling & analysis, pumping and slug tests, and tracer tests. The aquifer appeared to be unconfined with hydraulic conductivities (K) ranging from $2.6{\times}10^{-4}cm/s$ to $9.5{\times}10^{-3}cm/s$. The average linear velocity of groundwater was estimated to be $2.94{\times}10^{-6}m/s$, and the longitudinal dispersivity of a conservative tracer to be $5.94{\times}10^{-7}m^2/s$. Groundwater plume moves preferentially through the high-K zones, and the relatively high ion concentrations along the low-K zones implying deterred groundwater flow. Consequently, the spatial variation of hydraulic conductivity caused by aquifer heterogeneity and anisotropy appears to be the most important factor to maximize the effect of plume treatment system for application of in-situ groundwater remediation techniques.

• 한국지반신소재학회논문집
• /
• 제5권2호
• /
• pp.1-8
• /
• 2006

오염토양의 현장정화에 있어서 지반 및 오염물질의 물성치는 정화에 소요되는 시간과 함께 매우 중요한 고려사항이다. Gabr 등(1996)은 연직배수재가 설치된 오염지반에서 시 공간적 변화에 따른 초기오염농도에 대한 오염농도비($C/C_0$)를 구하는 식을 유도하였다. 본 연구에서는 Gabr 등이 유도한 식의 전산모형 FLUSH1을 이용하여 오염지반 흙의 유효입경, 간극률, 형상계수, 밀도, 지반의 온도와 오염물질의 단위중량 및 점성계수가 오염정화에 미치는 영향을 알아보기 위하여 시 공간적 변화에 따른 오염농도비($C/C_0$)를 분석 하였다. 분석결과 연직배수재가 설치된 오염지반에서 정화에 크게 영향을 미치는 인자는 오염지반 흙입자의 유효입경인 것으로 나타났으며, 그 다음으로 오염물질의 점성, 오염지반 흙의 간극율, 형상계수, 지반의 온도, 오염물질의 단위중량, 흙의 밀도 순으로 분석되었다. 오염지반 흙의 밀도는 오염정화에 미치는 영향이 아주 작은 것으로 나타났다.

• 한국건설관리학회논문집
• /
• 제17권1호
• /
• pp.3-9
• /
• 2016

가중사례기반추론 알고리즘을 이용하여 Excel VBA 기반의 개략비용 예측시스템을 개발하였다. 개발 시스템의 특징은 사례학습과 신규추정시 학습사례건수와 신규추정건수 만큼의 시트를 자동생성하며, 각각의 시트는 셀수식이 자동으로 입력되어 시스템의 활용성을 고려하였으며, 또한 영향인자를 최대 10개까지 선택이 가능하도록 하여 영향인자의 조합을 자유롭게 구성할 수 있도록 하였다. 개발한 비용예측시스템을 토양경작법 정화비용예측에 이용하여 토양정화 예측모델의 적용가능성을 검토하였다. 평균단가 예측모델은 물론 최적다중회귀 예측모델보다 개선된 결과를 확인하였다. 본 연구에서는 토양경작법을 대상으로 검토 하였으나 토양정화기술과 오염물질 종류 등 다양한 시나리오가 나타나는 토양정화사업분야에 사례기반추론을 이용한 비용예측모델은 향후 사례데이터 축적과 더불어 적용가능성이 커질 것으로 기대된다

• 한국물환경학회지
• /
• 제22권1호
• /
• pp.17-22
• /
• 2006

This study is about backwash condition and membrane fouling at continuous coagulation/ultrafiltration process in water treatment. The capacity of pilot plant was $0.06m^3/d$. The result of the test, Backwash cycle time and duration time had a significant effect on the efficiency of system and backwash. Backwash duration time was determined to be fixed in 30 seconds for the system with more than 95% recovery rate, It needed 30 minute backwash frequency. During the continuous operation, membrane fouling was analyzed by determining the filtration resistance ($R_i$) and cake layer resistance ($R_c$). At the initial stage, filtration resistance highly influenced the fouling behavior. But after 1.5 hours, cake layer resistance became more important than filtration resistant.